Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs - 3,000 lbs - Qty 4
(315 reviews)
Price: $59.31
In Stock
Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs - 3,000 lbs - Qty 4
Item # TDHP
Our Price: $59.31
In Stock
- All Info
- Reviews (315)
- Q & A (0)
- Videos (3)
- Photos
- Used (1)
Brophy Accessories and Parts - TDHP
- Camper Tie-Downs
- Turnbuckles
- Bed-Mounted
- Brophy
- Standard Disconnect
- Powder Coated Steel
- Locks Not Included
- No Tension Indicators
Hold-down kit lets you secure your truck bed camper to your Brophy bed-mounted tie-downs (TDSF, HSSF, HSAB, HSBP, or HSCP - sold separately). Sturdy turnbuckles let you firmly tighten down your setup. Includes 4 turnbuckles, chains, and S-hooks.
Features:
- Turnbuckles secure your camper to the tie-downs (sold separately) mounted on your truck
- Works with Brophy bed-mounted tie-downs (TDSF, HSSF, HSAB, HSBP, and HSCP)
- Sturdy steel construction
- Corrosion-resistant zinc-plated finish
- Kit includes:
- (4) 3/8" Hook-to-hook turnbuckles
- 4 S-hooks
- 4 Chains
Specs:
- Turnbuckle length:
- Extended: 12"
- Retracted: 7-5/8"
- Overall length when assembled (turnbuckle with chain and S-hook): 19-3/4"
- Weight capacity: 3,000 lbs
TDHP Camper Tie Down Hardware Package
Installation Details
Video of Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs - 3,000 lbs - Qty 4
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Brophy Camper Hold Downs Review
Today we'll be reviewing and showing you how the Brophy sliding camper hold downs, part number HSSF, will fit on most trucks. These hold downs will fit on any truck that has a downward lip on the underside of the bed rail. But keep in mind, if you have a bed liner, you may need to cut it out to fit properly. We'll begin our installation by first threading on the 7/16 hex nut onto our T bar. We'll then thread the T bar into the threaded hole on the tie down plate. We'll then take the included neoprene pads, which we'll place on the underside of the tie down plate as well as the back of the T bar.
We'll then place the tie down plate onto the bed rail as far forward as possible, making sure that there is still a lip on the underside of the bed rail. Next, we'll need to make sure that the 90-degree angle on the tie down plate is flush with the 90-degree angle on the bed rail. To do this, we'll loosen up the T bar until the bracket can rest flush on the bed rail. We'll then turn the hex nut tightly up against the backside of the black plate. We'll then tighten it down with a wrench.
We'll now take the other clamping plate and put it on the backside of the tie down plate underneath the bed rail. We'll need to make sure that the two holes on the clamping plate and the two holes on the tie down plate match up. You'll also notice the angled edge on the clamping plate will need to be up against the horizontal drop down of the bed rail. We'll place this up under the bed rail, thread in the bolts, and thread in our nuts on the other side. We'll then use a wrench to further secure them and tighten them down.
You can connect your camper with the tie down hardware package, part number TDHP, by simply taking the S hook, which the small part of the S hook should be into the chain. We'll then take the other end of the chain and set it onto the hook of the turn buckle. We'll then take the larger opening of the S hook and insert it into the hole of the tie down plate. As you can see, there are two adjusting hooks which will either loosen or tighten your load against your camper, giving you supreme hold. These hold downs are made of a 3/8" x 3" steel, and coated with a black powder coated finish to hold up against the elements.
They are highly adjustable and have more leverage than stake pocket hold downs because of the longer mounting brackets that secure to the base of the truck bed, as opposed to the inside of the stake pocket. The kit comes with four hold downs, and the hardware and pads you'll need to install them. That will complete today's review of the Brophy sliding camper hold downs, part number HSSF.
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs - 3,000 lbs - Qty 4 - TDHP
Average Customer Rating: 4.5 out of 5 stars (315 Customer Reviews)
Hold-down kit lets you secure your truck bed camper to your Brophy bed-mounted tie-downs (TDSF, HSSF, HSAB, HSBP, or HSCP - sold separately). Sturdy turnbuckles let you firmly tighten down your setup. Includes 4 turnbuckles, chains, and S-hooks.by: Mario06/12/2021
Got here early in the a.m. and on time before heading on a 2 hours trip. Easy install. I hoped the chains would be longer, I had to use 2 longer chains because of the position of the eye bolts on the camper.
Comments
Havent used the tie downs in a year. Hoping to use them again for a camping trip in March. Great product.
Mario - 02/17/2023by: Robert07/21/2023
They shipped one turnbuckle.
Comments
Sometimes we do make a mistake. I am sorry that we did not send everything that was ordered. I will have our Customer Service team reach out to you.
-- 
Jenny N - 07/25/2023by: Mike 05/09/2023
Brophy tie downs were just what I needed. Shipment was delayed twice once it left your facility.
by: Pat 03/20/2023
A must have for your camper if you are using the Brophy style tie downs.
by: Terry Lee08/20/2020
Easy install, quality hardware, great fit for my camper/ 2006 Dodge Ram 1500 quad cab truck combo. I would recommend this company and it’s quality products . Safety is a big concern and these tie downs are as safe as can be.
by: Tom04/21/2023
Fantastic...........great quality.........great price.......great product........Thank YOU !!!!!!!!!!!!!!!!
by: Chad07/26/2023
Works perfect for what I needed
by: Craig07/15/2023
Fit and finish. We're perfect.
by: Timothy 10/29/2022
Great selection, easy to shop.
One issue I noticed, is the quality of the screws used to mount the hardware.
It seems that with all the attention given to the actual hardware itself, it only makes sense to have better quality screws, etc.
They were cheap, not of high grade metal, and I had to go replace them.
I'd gladly pay a bit more, to get screws that are as good quality as the hardware.
All in all, though, I was satisfied...even if I had to source the screws myself at a Lowes store near me.
by: Francisco06/30/2023
Worked perfectly holds down my six pac camper just fine
by: Walt 07/26/2023
see review sent earlier today
by: Melissa 12/25/2021
Works great, was easy to find and navigate on the site and exactly what we needed to tie our camper safely to the truck... And thanks for the expedient processing of our order to it's arrival was very much appreciated... Thank you!
Comments
Working Great! So far securing the camper to our truck couldn’t be easier. I have confidence using these tie downs and it keeps our camper in the truck bed securely. Also we drive safe and take corners at safe speed and always mindful that the camper is there.
Melissa - 12/26/2022by: Ron 08/16/2022
The turnbuckles are easy to use with the Brophy truck bed clamps.
by: Neil07/03/2022
one of the tiedowns had bad threads and couldnt be tightened. others worked good though
Comments
This sounds like a defect. I have sent your information over to our customer service department for them to help get this corrected.
-- Katrina B - 07/07/2022
by: Mark 03/24/2023
Heavy duty for holding my camper on my truck.
by: Tom 06/25/2022
Good description, affordable, well packaged, quick delivery, great product. Would highly recommend both the tie downs and etrailer.
by: Jeff12/09/2022
Great customer service....Promp delivery...
I was very satisfied dealing with etrailer.
by: Gene 03/17/2023
Good quality no problems
by: James01/22/2022
The products purchased seemed to be of good quality, but I have not used any of the items yet. The problem is the box was partially broken open because it was not sealed properly! The tie downs were not protected from damage with much inside Packaging around the products! Therefore the paint was scuffed up badly !
Comments
Customer Service will reach out to you.
-- Sierra K - 01/24/2022by: Phill S.08/24/2015
The tie-down hardware package worked great. Nice and flexible, for matching the camper's layout. I might replace the S-hooks with threaded chain repair links, but for now, teh kit was complete and worked fine.
Comments
The Tie-down brackets and tie-down hardware kit are working fine. They are a good, inexpensive solution for securing my camper to my pick-up.I appreciate the follow-up. You folks are great to work with.
Phill S - 08/31/2016by: David 09/19/2022
They do what I bought them for- hold the camper down.
by: Jeremy09/13/2021
I paid extra money to have these turnbuckles delivered to me so I could go on a camping trip with my family. They came late and we had to cancel our camping trip. I tried calling customer service twice and no one answered.
Comments
Thank you for letting us know. Our customer service team should be reaching out to you in the near future.
-- Brooke M - 09/23/2021by: Wayne 06/24/2022
etrailer shipped quickly as usual. Packaging from Brophy could have been better reinforced as the box was demolished when I recv'd it (not unusual anymore). Everything was there though, so all is good. etrailer is a great business with excellent customer service.
by: Randy 03/31/2023
As always excellent service and packagi ng,
25
315
Show More Reviews
See what our Experts say about this Brophy Accessories and Parts
- Can Turnbuckles Be Used Without the Chains and S Hooks Included in the Camper Tie Down Package TDHPI spoke with my contact at Brophy and they agree that it is okay to just use the turnbuckles without the chains and S hooks that are included in the hardware package.
view full answer... - What is the Maximum and Minimum Length of Camper Tie Down hardware Package # TDHPI went out to the warehouse and pulled a tie down hardware package, # TDHP, to take some measurements. With the hooks on the turnbuckle portion out from the inside of 1 hook to the inside of the other hook is 12 inches. When you attach a chain and an S hook, from the inside of a hook to the inside of the S hook measures 19-3/4 inches. The minimum length between the hooks when they are all the way in is 7-5/8 inches. I have included a picture that shows the measurements for you. The hardware...
view full answer...
- Is a Jam Nut Needed for the Brophy Basic TurnbucklesThe Brophy Basic Turnbuckles part # TDHP don't require a jam nut as there is no way for the hooks to turn loose while they are attached to the tie-down points. Once tensioned, the body would not be able to turn either without force. The thread diameter of the rod is 3/8" if you want to use a jam nut of your own but it's not needed.
view full answer... - Will Hold Downs # HSSF Fit a 1971 GMC C/K, Can they be Installed Without Removing the CamperThe Camper Hold Downs, # HSSF, will fit your 1971 GMC C/K as long as you do not have a slide-in bed liner. The camper will have to be out of the truck for installation unless you have enough room between the camper and the sides of the bed in which to work. If this is the case, the camper might be too small for the truck and the Hold Downs might not work as they are designed to work with a camper that is a correct fit for your truck. The recommended hardware kit for the HSSF Hold Downs...
view full answer... - Will the Brophy Camper Hold Downs Fit on a 2001 Ford F150The Camper Hold Downs, part number HSSF may work on your 2001 Ford F150 Supercrew. The hold downs do not fit in the stake pockets but wraps around the bed rails and are mounted inside the bed. Dual rear wheel beds can present a problem, and you should check to be sure that there is room to install the parts on your truck. There is no weight capacity rating on the hold downs and the will work for any camper size that is properly sized for your vehicle. I added a photo showing a camper hold...
view full answer...
- Will the # HSSF Camper Tie Downs Fit on a 1997 Chevrolet 3500 Dually Truck and Slide in CamperThe Brophy Camper Hold Downs, item # HSSF, should fit on your 1997 Chevrolet 1 ton Dually. Some dually beds interfere with the installation of the hardware. They will definitely work with your 8-1/2 foot slide in camper, if there is room to install them on the bed of your truck.. The hold downs do not fit in the stake pockets, but wrap around the bed rails and are mounted inside the bed. When attached the chains are tightened and pressure is applied from the inside of the bed out and...
view full answer...
- Truck Bed Camper Tie Down Recommendation for a 2001 Dodge Ram DuallyFor camper tie downs, I recommend the Camper Hold Down Black Powder Coated Finish (Qty 4), # HSSF, with Camper Tie Down Hardware Package, # TDHP. The tie downs will fit with any camper that is a correct fit for your truck. With that said, with the fuel tank in the bed of your 2001 Dodge Ram Dually is sounds as if the camper will hang out passed the end of the bed by 2 feet. The tie downs wrap around the bed rails and mount inside the bed. They are not limited to stake pocket location...
view full answer... - What is the Width of the Camper Hold Down Black Powder Coated Finish Qty 4, # HSSFI spoke with my contact at Brophy about the Camper Hold Down Black Powder Coated Finish (Qty 4), # HSSF. She stated that they are 6 inches wide. These are a universal fit item made to fit most trucks. These hold downs wrap around the truck bed rails and are mounted inside the bed. Like other products, they do not fit in the stake pockets. To install, first place the protective tape under the rest plates and on the T-Bars. Next, thread the T-Bar into the nut at bottom of each Holdown. Then...
view full answer... - Camper Hold Downs for 2001 Dodge Ram 2500The Brophy Camper Hold Down Brackets, part # HSSF are a universal-fit item that will work on most full-sized trucks, including your 2001 Ram 2500. Some Dual rear wheel truck beds may interfere with the installation of the hold downs. The brackets wrap around the bed rail, instead of using the stake pockets. The brackets include the hardware for fastening the bracket to the truck, but we also offer hardware to attach the camper to the brackets, the kit is part # TDHP. The kit includes...
view full answer... - Will the Brophy Camper Hold Downs # HSSF Fit on a 1996 Ford F-150Yes, the Brophy Camper Hold Downs, item # HSSF, will fit on your 1996 Ford F-150. These Hold downs do not install in the stake pockets, but wrap around the bed side. The instructions, see attached link, show the installation in detail. You may also be interested in the Camper Tie Down Hardware Package, item # TDHP.
view full answer...
- Will the Brophy Camper Hold Down Brackets # HSSF Fit a 1997 Ford F-350 Dually Truck With a CamperThe Brophy Camper Hold Down Brackets, part # HSSF are a universal-fit item that will work on most full-sized trucks, but the bed on your 1997 Ford F-350 Dually may interfere with installation of the hold downs. The brackets include the hardware for fastening the bracket to the truck, but we also offer hardware to attach the camper to the brackets, this kit is Brophy Camper Tie Down Hardware, part # TDHP. The kit includes 4 turnbuckles, 4 S-hooks and 4 lengths of chain. The camper will...
view full answer... - Will Brophy Camper Tie Downs, # TDSF Fit a 2002 Ford F-150 and 1,700 Pound CamperThe Brophy Camper Tie Downs, # TDSF, are a universal application for full-size trucks and they will fit your 2002 Ford F-150. These tie downs come with hardware to mount them to your truck, but you will also need the Camper Tie Down Hardware Package, # TDHP, for a complete set up.
view full answer... - Camper Tie Downs for Lance Lite 1025 Camper on a 1986 Chevrolet 3500 Dually Crew CabThe Brophy Camper Hold Downs, part # HSSF are a universal fit item and will work on most full-sized trucks, but the bed of your 1986 Chevrolet 3500 Dually truck might interfere with the installation. They will not work with a slide-in bed liner. The hold downs do not fit in the stake pockets but wrap around the bed rails and are mounted inside the bed. There is no weight capacity rating on the hold downs and they will work for any camper size that is properly sized for your vehicle. The...
view full answer... - Will Stake Pocket Mount Camper Tie Downs, # TDSF Fit a 2011 Ford F-250The Stake Pocket Mount Camper Tie Downs, # TDSF, are a universal fit item intended to fit as many trucks as possible. But there is no fit guide available stating which trucks are compatible. It is still very likely that they will fit your 2011 Ford F-250. You may also be interested in the Camper Tie Down Hardware Package, # TDHP to connect the camper to the tie downs.
view full answer... - Will The Brophy Camper Tie Down # HSSF Fit My 1994 GMC 1500Yes, the item you selected, Camper Tie Down, part # HSSF, will fit your 1994 GMC 1500. Part # HSSF is universal fit item, and mounts over the sidewall of the truck bed, not in the stake pockets. You can use this tie down kit with spray-in bed liners. If you have a drop-in bed liner, you will need to trim it to use the Camper Tie Down # HSSF. The recommended hardware kit to install part # HSSF is Camper Tie Down Hardware Package, part # TDHP.
view full answer... - Will Brophy Camper Tie Downs, # TDSF Fit a 1994 Ford F-150The Brophy Camper Tie Downs, # TDSF, are a universal application for full-size trucks and they will fit your 1994 Ford F-150. These hold-downs come with hardware to mount them to your truck, but you will also need the Camper Tie Down Hardware Package, # TDHP, for a complete set up.
view full answer... - Will Brophy Stake Pocket Mount Tie Downs Fit a 1996 Dodge RamThe Camper Tie Downs, # TDSF, are a universal item made for full size trucks so they would most likely fit your 1996 Dodge Ram. They will also fit any camper that is a fit for your truck. The Camper Tie Down hardware Package, # TDHP, is the correct hardware for the tie downs.
view full answer...
- Will Brophy Camper Tie Downs # HSSF Work With 2009 Dodge Ram 1500 Quad Cab 2WD TruckThe Brophy Camper Tie Down, part # HSSF is a universal fit item and will work on your 2009 Dodge Ram 1500 2WD Quad Cab. There is not a weight capacity for the hold downs, and will work with any camper that fits your truck. Part # HSSF works with trucks that have spray-in bedliners. If your truck has a drop-in bed liner, it will need to be trimmed or removed to use part # HSSF. The Brophy Tie Down mounts over the sidewall of the truck bed. The recommended hardware kit to install part #...
view full answer... - Availability of Stake Pocket Camper Tie Downs for 2000 Ford F-350For your 2000 Ford F-350 you can use the Brophy Stake Pocket Camper Tie Down Kit # TDSF that you referenced as long as it has straight fenders and single-wall construction. These will install permanently in your truck. You may also want the matching Camper Tie Down Hardware Package # TDHP which consists of 4 each of turnbuckles, S hooks and chains. The linked video illustrates both items. A variety of frame-mount tie downs are also offered for your truck and these can be seen on the...
view full answer... - Camper Tie-Down Recommendation for a 2009 Ford F-150There's no reason the Brophy Camper Tie Downs part # TDSF wouldn't work on your 2009 Ford F-150. As long as your camper is less than 8 feet long this kit would work well for you. The recommended hardware kit to install either tie down kit is Camper Tie Down Hardware Package, # TDHP.
view full answer... - Do Brophy Camper Tie Downs have a Weight Capacity RatingThere is no weight capacity rating on the camper tie downs # HSSF and they will work for any camper size that is properly sized for your truck. The weight capacity will be on the Brophy Camper Tie Down Hardware Package, part # TDHP that is used to attach the camper to the tie downs. The hardware package has a weight capacity of 3,000 lbs.
view full answer... - Will Brophy Camper Tie Downs Fit a 2007 Dodge Ram 1500 with Spray-In BedlinerIf you do have 2 inches underneath the bed rail then you can use the Brophy camper tie downs # HSSF on your 2007 Dodge Ram 1500. I also recommend hardware package # TDHP. If you do not have the necessary clearance then the best option is going to be custom tie downs that attach to the frame. I have included a link to the custom tie downs for your truck. Use the drop down menu to select the version that describes your truck to see the options that fit.
view full answer... - Do the Brophy Camper Tie Downs HSSF have a Weight CapacityThere is no weight capacity rating on the camper tie downs, # HSSF, and they will work for any camper size that is properly sized for your truck. The weight capacity will be on the Brophy Camper Tie Down Hardware Package, # TDHP that is used to attach the camper to the tie downs. The hardware package has a weight capacity of 3,000 lbs.
view full answer... - Will Brophy Camper Tie Downs Fit a 2003 GMC Sierra and 8 Foot Liberator Truck CamperThere is no weight capacity rating on the camper tie downs # HSSF and they will work for any camper size that is properly sized for your truck. The weight capacity will be on the Brophy Camper Tie Down Hardware Package, # TDHP that is used to attach the camper to the tie downs. The hardware package has a weight capacity of 3,000 lbs. The NEW wider design fits the newest full size pickups but there are some exceptions: Will not fit step side beds or some double-wall beds Will not fit some...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Video Edited:
Zack K
Video Edited:
Patrick B
Expert Research:
Michael H
Expert Research:
Jameson C
Installed by:
Matthew K
Installed by:
Cole B
Updated by:
Amanda M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.