bing tracking image
  1. Trailer Jack
  2. etrailer
  3. Side Frame Mount Jack
  4. 1001 - 2000 lbs
  5. Topwind Jack
  6. No Drop Leg
Round Snap Ring Swivel Jack w/ Footplate - Bolt On - Black - Topwind - 10-1/2" Travel - 2K

Round Snap Ring Swivel Jack w/ Footplate - Bolt On - Black - Topwind - 10-1/2" Travel - 2K

Item # TJBB-2001-B
lowest price pledge
Our Price: $50.01
Trailer Jack
Orders above $99 qualify for Free Shipping
Shipping Weight: 14 lbs
Quantity: 
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Rust-resistant jack has a retracted height of 11" and an extended height of 21-1/2". The deep-seated retaining ring provides extra side-load support, and the spring-loaded pull pin lets you swivel the jack up for travel and down for use. Lowest Prices for the best trailer jack from etrailer. Round Snap Ring Swivel Jack w/ Footplate - Bolt On - Black - Topwind - 10-1/2" Travel - 2K part number TJBB-2001-B can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (148)
  • Q & A (0)
  • Photos
  • Why etrailer?

etrailer Trailer Jack - TJBB-2001-B

  • Side Frame Mount Jack
  • 1001 - 2000 lbs
  • Topwind Jack
  • No Drop Leg
  • Bolt-On
  • Swivel Jack - Pull Pin
  • 10 Inch Lift
  • With Foot
  • etrailer

Rust-resistant jack has a retracted height of 11" and an extended height of 21-1/2". The deep-seated retaining ring provides extra side-load support, and the spring-loaded pull pin lets you swivel the jack up for travel and down for use.


Features:

  • Utility jack lets you raise and lower your trailer
    • Ideal for agricultural and commercial applications
  • Retaining-ring swivel design lets you swing jack up for storage, down for use
    • Deep-seated ring ensures extra side-load support
    • Convenient 1/2", spring-loaded pull pin secures and releases jack
  • Topwind handle has claw grip for comfortable, easy cranking
    • Easily folds away for storage
  • Corrosion-resistant finishes
    • Outer tube has durable black powder coat
    • Inner tube and footplate have rust-resistant clear zinc finish
  • Welded-on footplate minimizes sinking in soft ground
  • Effortless greasing with built-in grease zerk
  • Bolt-on mounting bracket included


Specs:

  • Application: trailer frames with a height from 2" to 4"
    • No more than 3" wide
  • Bracket height
    • Retracted: 11"
    • Extended: 21-1/2"
  • Travel: 10-1/2"
  • Outer tube diameter: 2-1/4"
  • Inner tube diameter: 2"
  • Footplate dimensions: 7-1/2" long x 3-3/4" wide
  • Handle radius: 7-3/4"
  • Lift capacity: 2,000 lbs
  • 1-Year warranty


TJBB-2001-B Ram Round, Pipe Mount Swivel Jack - Bolt On - Black - Top Wind - 10-1/2" Travel - 2,000 lbs






Customer Reviews

Round Snap Ring Swivel Jack w/ Footplate - Bolt On - Black - Topwind - 10-1/2" Travel - 2K - TJBB-2001-B

Average Customer Rating:  4.9 out of 5 stars   (148 Customer Reviews)

Rust-resistant jack has a retracted height of 11" and an extended height of 21-1/2". The deep-seated retaining ring provides extra side-load support, and the spring-loaded pull pin lets you swivel the jack up for travel and down for use.

by:

We bought this jack for a very small MC pop up trailer. Fits as described. Shipping was fast and the quality is impressive. Very sturdy. Still building so we have not tried it under more than 350lb. load. So far so good.



by:

A nice heavy duty jack that will serve me well. Great packaging and customer service is excellent. I plan on using this jack on my trailer that is made from an old model camper frame with an old model jack and large tongue frame. This trailer is used for hauling my side by side on hunting trips and for hauling my riding lawn mower. A+++++++



by:

For my application this replacement trailer jack was a huge up grade, especialy with the grease zerk ability to lube and protect from the elements.



by:

Best solution for my little trailer. Works perfectly.


Comments
I use this 5’x7’ trailer on my Honda CR-V about three x per week and the jack has worked perfectly for my purposes. Excellent product.
O. J - 07/22/2021

by:

Does the job! Easy to install and functions without fault.



by:

Put this Jack on my utility trailer and use it regularly. A real plus when the trailer is loaded and means I don't have to unload it immediately to drop the trailer. Easy install and plenty strong.



by:

Very well built. Not some cheesy piece of junk.
Easy to install.
Works exactly as described



by:

I’m so glad I purchased this jack for my trailer. It arrived quickly and when I got it I immediately installed it. It was very easy to install with just two brackets and four bolts and nuts. Done in five minutes. It is a very solid design and I like how the leg folds up with ease! I can now put my tailgate down without worrying about dinging it up! Should’ve bought this jack when I first got my truck! Thanks e trailer!!!



by:

I got this for a 5x8 utility trailer, for my uses it's perfect. It is much more solid and stable than cheaper versions. I also prefer the foot plate, it provides a more stable stand for working on the trailer if it's not attached to a vehicle. It saves the trouble of finding a block when storing the trailer, and it's always at the right height to hitch up when I need it.



by:

Trailer jacks work like a charm. very easy to crank. bought 4 jacks to mount to boat trailer. The 4 jacks lift 3500lbs with no problem. I would recommend these



by:

Very good trailer jack, It was easy to install and holds the trailer tongue up nicely for hook up and un hooking. Thank you Etrailer for a fine product!



by:

I received this trailer jack (TJBB-2001-B) in a timely manner and it was exactly as described on your website. The person I talked with was very helpful when assisting me with the order. Installation looks very easy and I like the fact that it has a grease fitting for lubrication. I hope to get many years of service from this product.



by:

This trailer jack is a lot better quality than the one it replaced. Good price, good quality, I like the grease zerk makes it easy to keep lubricated.



by:

This product is a value for what it does. I needed a short lift for a small trailer and this met my needs. I have not mounted it to the trailer yet however I did see if all was going to fit and it did. The hardware is included so it should be an easy install. Thanks eTrailer for all the good equipment to chose from.



by:

We got the jack to put on a log splitter to make our lives a bit easier. Installation was a snap and the unit it perfect for the job. It was a huge plus that our order was upgraded for quick shipping and it arrived in 2 days. i will order from these folks again!



by:

I searched all over a jack like this that bolted up. Most places only had the weld on type. This jack is year old and still working great. I also like that it rotates up instead of pointing down like my old jack that was installed from factory.



by:

Have only used the trailer jack so far and though I had to call for assistance to install it, it works as expected. There were no included instructions with the trailer jack.



by:

Nice an compact. Easy to raise and lowe r.



by:

Second time buying from etrailer.com. Great experience both times. Fast shipping fair prices.



by:

Great jack easy to install. Use it for my box trailer lifts it up effortlessly. Would definitely recommend.



by:

well made quality prouduct installed on each side of the rear of car trailer to stabilize while loading shipping was fast and free great customer service



by:

I like the round snap ring swivel jack w/footplate -bolt on



by:

Product was delivered quickly and is already installed. I need a jack where the handle would not hit my tail gate and this will work perfectly.



by:

This trailer jack stand was easy install, easy operation. Super value!



by:

This order was filled correctly and delivered quickly. I have purchased many parts from Etrailer and have always been pleased with the service and quality


25
148
Show More Reviews

Ask the Experts about this etrailer Trailer Jack



  • Overall Height of 2K Topwind Swivel Jack # TJBB-2001-B When Fully Retracted
    I measured this jack, Item # TJBB-2001-B, in our warehouse. It measures 15-3/4 inches from the footplate to the top of the outer tube. It measures 17-1/2 inches from the footplate to the top of the jack when the handle is folded in. I've attached an image showing these measurements.
    view full answer...
    Image 1 for
  • Mounting Bracket Hole Spacing on etrailer Round Snap Ring Swivel Jack TJBB-2001-B
    The etrailer Round Snap Ring Swivel Jack # TJBB-2001-B has several mounting options thanks to the multiple holes in the included bracket. This jack bolts on to trailer frames up to 3-inches wide and from 2 to 4-inches tall. I went to our warehouse to measure the bracket mounting hole spacing for you and it is shown on the photo I linked.
    view full answer...
    Image 1 for
  • Does Trailer Jack # TJBB-2001-B Include Mounting Hardware
    The topwind swivel jack, part # TJBB-2001-B, does include the hardware to mount to the trailer frame. The trailer frame needs to be within 2 to 4 inches tall and no more than 3 inches wide.
    view full answer...
  • Can Trailer Jack # TJBB-2001-B Have the Gears and Shaft Removed?
    You can use the Round Snap Ring Swivel Jack w/ Footplate # TJBB-2001-B for just the outer tube and mount while removing all the inner parts. The capacity of the parts will not be rated any higher than the 2,000 lb rating of the jack because it has not been tested in that manner.
    view full answer...
  • Recommended Side Frame Trailer Jack for 3 x 3 Straight Tongue Trailer
    Based on everything you mentioned, the trailer jack I highly recommend for your trailer is the Round Snap Ring Swivel Jack with Footplate - Bolt On # TJBB-2001-B. This will easily bolt on to your 3" x 3" trailer tongue, has a 21-1/2" extended height which is perfect for the height of your trailer, and has a 2,000 lb capacity, which is more than enough for the weight of your trailer because a jack only needs to support the tongue weight of a trailer. This is a very high-quality jack with...
    view full answer...
    Image 1 for Image 2 for
  • How Often to Grease etrailer Trailer Jack # TJBB-2001-B
    There isn't a set schedule for how often to apply grease into the trailer jack part # TJBB-2001-B but if you did it a couple times a year you'd be set. If the trailer gets a lot of use maybe bump that up to 3 to 4 times a year. I'd also run the jack up and down after pumping grease into as well so that you know it's reached the full length of the screw. It does come pre-greased as well.
    view full answer...
  • What Mounting Bracket Is Needed for the Round Snap Ring Swivel Jack TJB-2001-Z
    There is only one bracket needed to install the Round Snap Ring Swivel Jack part # TJB-2001-Z on your utility trailer and the bracket is included with the jack so no additional purchases are necessary. I have pointed this bracket out for you. It will need to be welded to the trailer frame. If you don't want to do any welding on the trailer then you can use the Round Snap Ring Swivel Jack w/ Footplate part # TJBB-2001-B instead which is essentially just a bolt-on version of the above jack...
    view full answer...
    Image 1 for
  • Availability of Swivel Jack and Trailer Tailgate Lift Assist
    There are bolt-on swivel jacks you could change to that would offer similar specs to your current one. The Round Snap Ring Swivel Jack # TJBB-2001-B has a 2,000 lb lift capacity, extended height of 21-1/2" and retracted height of 11". It is for trailer frames that are between 2" and 4" high and no more than 3" wide. I've added a link to each of our bolt-on swivel jacks for you to take a look at. As for a lift assist, I recommend the Gorilla-Lift Utility Trailer Tailgate Lift Assist # GL1....
    view full answer...
    Image 1 for Image 2 for
  • Recommended Tongue Jack for a 1997 Starcraft Space Flyer
    I was not able to pull up much information on a 1997 Starcraft Space Flyer but it looks like you might be looking for a side mount trailer jack. For this, we have a few options but I like Round Snap Ring Swivel Jack w/ Footplate part # TJBB-2001-B. This jack offers bolt-on instillation, a swivel mount design for improved ground clearance, and a wide-base footplate to prevent sinking on soft ground. I have attached a review video for you as well.
    view full answer...
  • Is the Round Snap Ring Swivel Jack w/ Footplate Made In the USA
    The Round Snap Ring Swivel Jack w/ Footplate part # TJBB-2001-B is a price point option therefore made overseas. If you are looking for a USA made jack we do have some options from Dutton-Lainson which are attached below. I recommend the Pull Pin, Easy Swivel Trailer Jack part # DL22800.
    view full answer...
  • A-Frame Trailer Jack that Can Attach to Inside of Trailer Frame
    So the Trailer Valet 5X Swivel Jack # STC-V211 uses brackets to mount to the side of a trailer frame. For a trailer jack that uses the same style of topwind handle and mounting brackets we have the Round Snap Ring Swivel Jack w/ Footplate # TJBB-2001-B which would work well.
    view full answer...
  • Bolt-On Swivel Jack For Improved Ground Clearance
    You are correct that welding steel to aluminum is a tricky process best left to experienced welders, but if your issue is that you jack sometimes scrapes on the ground you can avoid the need to weld by simply bolting on a swivel jack. Pull Pin Swivel Jack # TJBB-2001-B has a 2000-lb rating, includes a foot plate and bolts on to the side of trailer frames up to 3-inches wide and from 2 to 4 inches tall. Just pull the pin to swivel the jack up and out of your way for travel. This jack extends...
    view full answer...
    Image 1 for
  • Length of Fulton Jack # FXP15L In Stored Position
    The Fulton Bolt-Thru Swivel Marine Jack - Bolt On - Sidewind - 12" Lift - 1,500 lbs # FXP15L has a complete length when stowed sideways of 27-1/4 inches from the top of the jack to the bottom of the wheel. Your tongue length is incredibly short so you most likely won't be able to use a jack with a wheel as the wheel itself is either 6 or 8 inches diameter on jacks. I recommend part # TJBB-2001-B which will be just over the 14 inches of space you mentioned when in that stored position....
    view full answer...
    Image 1 for
  • Availability of Bolt-On Pipe Mount Trailer Jack with 10" Lift
    All of our pipe mount trailer jacks do require welding, but we do have bolt-on jacks like the etrailer # TJBB-2001-B that should work. I was able to see that Kendon motorcycle trailers tend to have smaller frames and this jack is compatible with 2" - 4" tall frames that are no wider than 3". If your trailer frame is smaller than that please let me know and I can see if we have any other options available.
    view full answer...
  • Recommended Bolt-On Swivel Jack for 5K Food Trailer
    I recommend using the 2K Round Snap Ring Swivel Jack w/ Footplate # TJBB-2001-B OR the 1,500 lb Round Swivel Marine Jack # MJ-1500B if you'd like a jack with a wheel. Both of these are cost-effective options that are still quality products. The 2K jack has an extended height of 21-1/2" while the jack with a wheel has an extended height of 24". Every bumper pull trailer should have a tongue weight that is no less than 10% or no more than 15% of the weight of the trailer. Since your 5K trailer...
    view full answer...
    Image 1 for
  • Recommended Drop Leg Jack for 3 Inch x 5 Inch Trailer Frame
    The Square Jack w/ Footplate part # MJSQ-2500B will work with trailer frames 3" wide x 5" tall and has a zinc finish so it will resist corrosion just like your galvanized trailer frame. The mounting bracket on the jack is at the very bottom of the outer tube so you don't have to worry about a swing-away but we do have the Fulton F2 Swing-Up Jack part # F1413230134 if you want a swing-away feature though you will pay more for this. I am not entirely sure what type of jack you are looking...
    view full answer...
  • Jack Recommendation for a 6 inch Tall Trailer Frame
    We have a solution that will work for you, but none of the bolt-on trailer jacks we offer are compatible with a 6 inch tall trailer frame. For a trailer frame of that height, I'd recommend you use a weld-on jack like part # FTJ120W0301. This jack has a 1200 lb capacity, and easily swivels rearward for storage with the pull of a pin. A qualified welder in your area would have no problem installing this jack either. Would only take them a matter of minutes. Weld on applications are better...
    view full answer...
  • Trailer Jack Compatibility with 14 Inch Tongue Space
    The Pull Pin, Easy Swivel Trailer Jack with 8" Wheel - Sidewind - 1,500 lbs. by Dutton-Lainson # DL22800 has an overall length of 26-5/8 inches, so it will not fit where you are desiring. The height to the bracket when retracted is 13 inches, but the overall will to too long. The closest I found was the # PS1400300303 which is 11 inches to the center of the bracket when retracted as is # TJBB-2001-B.
    view full answer...
    Image 1 for
  • Trailer Jack to Avoid Tailgate Clearance Issues
    There are a few solutions for your tailgate to clear the jack on your trailer. I recommend to use a longer ball mount like # D-26, that would move the trailer back further away from the truck and give you clearance you need. If you know what size the hitch on your vehicle is, the rise or drop of the ball mount for your trailer, if you're using weight distribution or not, and the measurement from the center of the hitch pin hole to the center of the ball hole I can make the best recommendation...
    view full answer...
    Image 1 for Image 2 for
  • Recommended Trailer Coupler and Locks for Rollback Car Trailer with 3 Inch Tongue
    The only 3 inch hitch lock we currently have is the Weigh Safe Hitch Receiver Lock for 2", 2-1/2", and 3" Hitches - 3-1/2" Span # WS05. This will secure your 3 inch x 3 inch receiver tube and accessory. For a jack, you can use the Round Snap Ring Swivel Jack w/ Footplate - Bolt On - Black - Topwind - 10-1/2" Travel - 2K # TJBB-2001-B. If I undersand your issue, it sounds like you need the Titan Zinc-Plated Straight-Tongue Coupler - 21,000 lbs # T4853100 for a heavy-duty trailer coupler...
    view full answer...

Do you have a question about this Trailer Jack?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer jack for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Joshua S
Video by:
Joshua S
Employee Cole B
Installed by:
Cole B
Employee Brent H
Installed by:
Brent H
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Ronnie R
Updated by:
Ronnie R
Employee Mike S
Updated by:
Mike S
Employee Amanda M
Written by:
Amanda M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.