bing tracking image
  1. Camper Tie-Downs
  2. TorkLift
  3. Rear Tie-Downs
  4. Frame-Mounted
  5. Powder Coated Steel
  6. Custom Fit
TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear

TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear

Item # TLD3101
lowest price pledge
Retail:$414.99
Our Price: $378.99
You Save: $36.00
Camper Tie-Downs
This item qualifies for Free Shipping
Shipping Weight: 23 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Need help with installation?
Locate installers near me
Ready your truck to haul a camper with these sturdy tie-downs. Inserts slide into frame-mounted brackets for use and easily remove for a clean, unobtrusive look. Custom designed for your vehicle. 1-800-940-8924 to order TorkLift camper tie-downs part number TLD3101 or order online at etrailer.com. Free expert support on all TorkLift products. Guaranteed Lowest Price and Fastest Shipping for TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear. Camper Tie-Downs reviews from real customers.
  • All Info
  • Reviews (938)
  • Q & A (0)
  • Videos (1)
  • Photos
  • Used (1)
  • Why etrailer?

TorkLift Camper Tie-Downs - TLD3101

  • Rear Tie-Downs
  • Frame-Mounted
  • TorkLift
  • Powder Coated Steel
  • Custom Fit

Ready your truck to haul a camper with these sturdy tie-downs. Inserts slide into frame-mounted brackets for use and easily remove for a clean, unobtrusive look. Custom designed for your vehicle.


Features:

  • Tie-downs provide attachment points at the rear of your truck bed for securing a bed-mounted camper
    • Front tie-downs sold separately
  • Frame-mounted design ensures excellent handling
    • Securing camper to truck's base instead of its bed better distributes weight to keep setup from being too top-heavy
  • Virtually undetectable when they're not in use
    • Tie-down inserts can be easily removed from frame-mounted receiver brackets with included pins
  • Custom fit for your vehicle
    • Brackets fit tight to truck frame - no loss of ground clearance
  • Powder coated steel construction
  • 2 Rear tie-down inserts, frame brackets, and necessary hardware included
  • Made in the USA
  • Lifetime warranty


D3101 Tork Lift Tie Down - Rear Frame Mount

Replaces 39147



This Product Fits The Following Vehicles

  • 1994 - 2001 Dodge Ram Pickup 1500 - 6-1/2 Foot Bed without board or step underneath truck bed and with a factory installed hitch
  • 1994 - 2001 Dodge Ram Pickup 1500 - 8 Foot Bed with board or step underneath truck bed and with a factory installed hitch
  • 1994 - 2001 Dodge Ram Pickup 1500 - 8 Foot Bed without board or step underneath truck bed and with a factory installed hitch
  • 1994 - 2002 Dodge Ram Pickup 2500 and 3500 - 6-1/2 Foot Bed without board or step underneath truck bed and with a factory installed hitch
  • 1994 - 2002 Dodge Ram Pickup 2500 and 3500 - 8 Foot Bed with board or step underneath truck bed and with a factory installed hitch
  • 1994 - 2002 Dodge Ram Pickup 2500 and 3500 - 8 Foot Bed without board or step underneath truck bed and with a factory installed hitch



Video of TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for TorkLift Rear Frame-Mounted Camper Tie-Downs Review

Speaker 1: Today, we're going to be taking a look at TorkLift's line of Custom Frame-Mounted Camper Tie-Downs. This is for the rear.You'll want to check etrailer.com's fit guide to verify which ones are going to work with your vehicle.They're also available for the front. So, you can get a matching set custom made for your application. These custom mounted brackets are going to provide an easy attachment point to hook up your camper.What's additionally great about those is that they have the removable ends, so when you're not using it, they'll be hidden away and your vehicle will look like factory.The custom mounted brackets we're engineered to provide you with the best location for your tie-down point, to evenly distribute the load. So once they're attached and adjusted, this'll keep your camper from being too top heavy. This will increase the overall ride quality while your camper's attached and the safety.The attachment points are removable and adjustable.

There'll be two loops here where you can make your connection to your camper and there's two holes here to adjust the length of how far your attachment point sticks out.You can use either hole. So if you have very wide camper, you can use that first hole, or if your camper is tucked in nicer, you can use the second hole. The included pin will slide through the hole and keep it in place.It's made of a durable powder coated steel, so it's going to be extra strong and rigid, to keep your camper tied down nice and snug and the powder coat is going to prevent any rust and corrosion from occurring.When you're ready to hook up to your new connection point, take your turnbuckles and attach them to your camper. Now, if you need some turnbuckles, you can pick some up here on our website. You'll hook it in to your camper and you'll also hook it in down here on your new attachment point.Then, depending on your style of turnbuckle, you'll want to tighten it down.

Ours is a twist adjustment type. There are many different styles.And now with both sides in place, we'll repeat that same process in the front.Compared to Stake Pocket, or bumper-mounted camper tie-downs, frame-mounted tie-downs will provide better handling. They also mount out of sight, so they will be undetectable when not in use, giving your truck a cleaner look.Because the custom fit brackets secure tight against your trucks frame, there is no loss of ground clearance; and that completes our look at TorkLift's line of Custom Frame-Mounted Camper Tie-Downs for the rear.


Customer Reviews

TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear - TLD3101

Average Customer Rating:  4.8 out of 5 stars   (938 Customer Reviews)

Ready your truck to haul a camper with these sturdy tie-downs. Inserts slide into frame-mounted brackets for use and easily remove for a clean, unobtrusive look. Custom designed for your vehicle.

by:

Install was reasonable straightforward. We have an older 2002 Dodge Ram 2500 Diesel Quad Cab and it seems like there should be additional holes so that the inserts could be stored on the truck without sticking out. Haven't had a chance to take a ride with the camper on the truck with these, but logic says it should be considerably more stable!




by:

Very easy instruction and fits quite well only complaint for this part was the shipping




by:

Best tie down base on the market. Easy to install. Very ridgid.




by:

Tie downs fit my truck perfectly. Easy to mount the camper on the truck by myself. Not cheap but worth every penny!




by:

Great prices and fast shipping, Thank you!!




by:




by:




by:




by:




by:

Review from a similar Frame-Mounted Rear in Camper Tie-Downs


My brother installed these and he used air tools. The brackets fit perfectly. The instructions were thorough. They bolted right in and the only delay was the disconnect/reconnect of the e-brake cable to install the driver's side bracket (2019 RAM 3500). After all the parts were laid out, he installed all 4 brackets in an hour.
He commented many times on the weight, high quality and PERFECT FIT of these brackets. These are worth the price and made in the USA.


Comments
These are still working perfectly.
Jennifer - 03/22/2022


by:

Review from a similar Frame-Mounted Rear in Camper Tie-Downs


Forklift tie downs are manufactured to exact fit to existing manufactured frame rail holes. They lined up perfectly and after 6000 miles with camper on board have stayed secure. The only downside, (this is relative to when and ware you use you camper) they will corrode when driving through snow covered roads that have been treated with sand and/or salt. I use an oil based product to protect them corroding.




by:

Review from a similar Frame-Mounted Rear in Camper Tie-Downs


I bought this when my previous belly bar and rear tie-down bent badly when our truck slid off the road into a steep ditch and our camper nearly tipped sideways off our truck. This product is a bit better then my old set up, but I expected something much better for this very high price. It wasn't too tough to install, despite the poorly written instructions. Also, the kit did not include a bolt fisher for the 7/16 bolt. The bolt fisher supplied was for a 1/2 inch bolt. Fortunately I had the correct bolt fisher from a previous project. I am also disappointed that the tie down hole has a slot cut in it which seems would significantly weaken it. I am not optimistic that the tie-down point will not bend or break if we have a similar significant side load such as when we slid into the ditch. I will probably weld the slot in the tie-down point shut to strengthen it.


Comments
They are starting to rust significantly. That is very disappoint considering the very high cost of these. It is interesting that they dont allow pictures of the product for this update.
Floyd D - 11/11/2021


by:

Review from a similar Frame-Mounted Rear in Camper Tie-Downs


I had the mountings professionally attached to the frame. The hatches can be easily removed when not in use( and I would recommend that to keep them from being stolen). Using chains and turnbuckles, I feel very comfortable with my truck camper staying where it is.. does not rock, very solid.
It’s nice to feel secure about my camper staying firmly attached.
It was worth the investment.




by:

Review from a similar Frame-Mounted Rear in Camper Tie-Downs


Easy to install and super secure! Made my Lance 1020 feel like its part of my truck. Highly recommended for the juggernaut class truck campers. I’ll never go back to the stake pocket style or bed mount tie downs again.


Comments
1 year later, Im still very pleased. Ive gotten many positive comments from people that didnt know they existed and, after talking to me, plan on upgrading themselves.
Cameron - 07/13/2022


by:

Review from a similar Frame-Mounted Rear in Camper Tie-Downs


Feel strong and solid with the camper but already seeing some rust in places. Wish the aluminum had been in stock.




by:

Review from a similar Frame-Mounted Rear in Camper Tie-Downs


Easy install on a 2017 Ford F-350 Lariat w/ factory hitch.




by:

Review from a similar Frame-Mounted Rear in Camper Tie-Downs


The rear mounts were easy to mount. The only problem the package was missing 4 flat washers. I also just received the Front mounts. They were a little harder to mount by myself. Some advice is to watch the install on [video]. I ended up using a floor Jack to hold the mounts.




by:

Review from a similar Frame-Mounted Rear in Camper Tie-Downs


This installation was easy. If installation is on F250, the additional notched plates must be attached to the tie-downs. This prevents rotation inside the receiver tube. A couple of ratchet extensions will be required to hold the bolt head. The finished installation is secure and looks good. The welding appearance could be better, but seems strong enough.


Comments
The tie downs are still secure and work great. These rear tie downs will get alot of road grime and mud, so keep them clean.
Ronald - 04/14/2022


by:

Review from a similar Frame-Mounted Rear in Camper Tie-Downs


The Torklift frame mounted camper tie down so far seems to be a good fit, with one exception. I have full length round tube nerf running boards, that extend past the cab. I had to remove them to make room for the tie down bracket. I even purchased the bracket that allows clearance for running boards, but round tube type boards are a totally different deal. At the end of the day it isn’t a deal breaker, I’ll just purchase cab length running boards. I gave the review 4 stars instead of 5, because I think this is a detail Torklift should had accounted for. It is very likely if my boards were flat, the brackets would had cleared.




by:

Review from a similar Frame-Mounted Rear in Camper Tie-Downs


Installed front hitch in front and rear tie-downs.
Solid as a rock and easy to install




by:

Review from a similar Frame-Mounted Rear in Camper Tie-Downs


I paired these with the front mounts and am totally pleased. Easy to install and simple to use. I would recommend these for any size camper, not just the juggernaut class ones. They keep your camper rock solid and not wallowing around like you see some of the bed-mounted brackets.




by:

Review from a similar Frame-Mounted Rear in Camper Tie-Downs


Bought these as I needed rear tiedowns for my camper. Instructions easy to read and the tiedowns were a pretty easy install. Worked great on our 1800 mile trip last summer. Highly recommend these Torklift tiedowns.




by:

Review from a similar Frame-Mounted Rear in Camper Tie-Downs


Excellent product. Perfect fit. Super easy to install.




by:

Review from a similar Frame-Mounted Rear in Camper Tie-Downs


Easy install, very effective way to keep the camper were it's supposed to be. Just bought a new truck and ordered another set for it. As long as I have a bed mounted camper I will be using this tie down system.




by:

Review from a similar Frame-Mounted Rear in Camper Tie-Downs


I installed a TorkLift Eco Hitch on the front of my F250. It sits higher than most front hitches. I need this drop receiver to lower my motorcycle below my line of sight! VERY heavy duty!



25
939
Show More Reviews

See what our Experts say about this TorkLift Camper Tie-Downs



Do you have a question about this Camper Tie-Down?


Used Items Available
Used Picture for TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear

Condition: Like New

Notes: May have damaged packaging or minor cosmetic blemishes.

Our Price: $377.95
Secure Checkout


  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality camper tie-downs for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate camper tie-down information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Jameson C
Expert Research:
Jameson C
Employee Dustin K
Video Edited:
Dustin K
Employee Wilson B
Updated by:
Wilson B
Employee Isabelle B
Updated by:
Isabelle B
Employee David F
Installed by:
David F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924