bing tracking image
  1. Trailer Lights
  2. Optronics
  3. Tail Lights
  4. Rectangle
  5. LED Light
  6. Red
Optronics LED Combination Trailer Tail Lights - Submersible - 40 Diodes - Driver and Passenger Side
Optronics

Optronics LED Combination Trailer Tail Lights - Submersible - 40 Diodes - Driver and Passenger Side

Part Number: TLL160RK
In Stock
$77.27
Retail:$112.99
You Save: 32%
Trailer Lights
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
8-1/16" x 2-7/8" Rectangle. Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers wider than 80". Surface mount - hardware included. 3-Wire pigtail. Great Prices for the best trailer lights from Optronics. Optronics LED Combination Trailer Tail Lights - Submersible - 40 Diodes - Driver and Passenger Side part number TLL160RK can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (626)
  • Q & A (0)
  • Photos

Optronics Trailer Lights - TLL160RK

  • Tail Lights
  • Rectangle
  • LED Light
  • Red
  • 8L x 3W Inch
  • Surface Mount
  • License Plate
  • Rear Clearance
  • Rear Reflector
  • Side Marker
  • Side Reflector
  • Stop/Turn/Tail
  • Submersible Lights
  • Optronics

8-1/16" x 2-7/8" Rectangle. Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers wider than 80". Surface mount - hardware included. 3-Wire pigtail.


Features:

  • Rectangular combination tail lights are designed to serve 7 functions on trailers over 80" wide when properly mounted
    • Stop, tail, turn, side marker, side reflex, rear clearance, and rear reflex
    • Built-in license plate light on driver's-side light illuminates license plate
  • Sealed, waterproof construction is submersible
    • Designed for marine trailer applications
  • Durable surface-mount technology (SMT) construction of LED circuit board
    • Better withstands shock and vibration
    • Allows for improved heat distribution
  • LEDs make great replacements for incandescent lights
    • Last 50 times longer
    • More efficient - provide brighter light with less power output
    • No bulbs to replace - no brittle filaments
  • Red acrylic lens screws on and can be easily replaced
  • Molded plastic housing
  • Mounts on surface of trailer - hardware included
  • 3-Wire pigtail
  • DOT compliant
    • Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting
  • P2 rated


Specs:

  • Configuration: driver side (STL17RB)
    • Passenger side (STL16RB)
  • Dimensions: 8-1/16" long x 2-7/8" tall x 2-13/16" deep
  • Total diodes: 40
    • Driver's-side light: 22 diodes
    • Passenger's-side light: 18 diodes
  • Power draw at 12.8 volts:
    • Stop/turn signal light: 0.259 amps
    • Tail light: 0.062 amps
  • Lifetime warranty on LEDs


Optronics STL16/17 Series LED Combination Marine Tail Light Measurements

Sealed, Waterproof Trailer Light

The waterproof construction of these lights make them ideal for use on trailers that may be submerged, like a boat trailer. Each circuit board is sealed, which means that water will not damage the diodes or circuit board.


Combination Lights for Trailers Over 80" Wide

Flatbed trailer over 80" wide with combination tail lights

If a trailer is 80" or wider at its widest point, then it requires rear clearance lights in addition to basic trailer lights. These clearance lights indicate the width of the trailer when it is viewed from the back.


To meet these requirements on a flatbed utility trailer where the bed extends past the wheels, you can install combination trailer lights that include the rear clearance function. For proper mounting, the lights must be installed at the widest points on the rear of the trailer - one on each corner.


P2-Rated or P3-Rated Lights

Diagram of light spread for P2 rated light

A P2-rated or P3-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.



TLL160RK Optronics Combination LED Trailer Taillights for Boat and Marine Trailers More Than 80" Wide - Left Side and Right Side - Red Lens

STL16RB and STL17RB




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Optronics LED Combination Trailer Tail Lights - Submersible - 40 Diodes - Driver and Passenger Side - TLL160RK

Average Customer Rating:  4.8 out of 5 stars   (626 Customer Reviews)

8-1/16" x 2-7/8" Rectangle. Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers wider than 80". Surface mount - hardware included. 3-Wire pigtail.

by:

Very satisfied with the combination trailer tail lights. Much brighter than the original lights. Fit was perfect, no alterations were needed.



by:

Second set of these lights for me...First set got crunched backing up. They work great !...
I trust eTrailer to have what I need and a few things I don't...but want anyway. eTrailer is my "Go To Place" for anything for my Boat Trailer.



by:

The lights work on the boat trailer just fine
I ordered the Wrong size lights but got to work anyway
I kept blowing the light bulbs on the old lights and
The new led lights have not had any problems .

Brent M.

3/2/2024

I have used the trailer lights for a year now and I don’t worry about the lights anymore. They work great.



by:

The trailer lights came and they were exactly what I wanted. Good customer service and efficient.



by:

Bright lights. Used on EZ loader jetski trailer. Had to drill new mounting holes to fit existing bracket. Comes with steel plated fasteners which I substituted with stainless steel. Have not submersed the lights yet. Say they are submersible. Always a challenge with boat trailers keeping lights working properly. Hoping these LEDs last a long time.



by:

Order arrived before expected delivery date. Easy installation and great price. Much brighter than original trailer lights.



by:

So far so good. I've had miserable experiences with trailer lighting in general so if these make it more than two years without failing I'll call that a win. The Optronics products overall seem to be good quality and at a good price. I've replaced all the side markers with the Optronics and those have been working well too. That said, I keep spares on hand. I also apply dielectric grease to all wire connections and try to reapply that grease once or twice a year.



by:

Seem good so far but the recessed area in the back could be deeper to accommodate wiring better



by:

Very nice set of lights. Bright and LEDs are the way to go. I highly recommend these.



by:

I was an Idiot last week and broke my drivers side light , so I bought a new pair ,very simple to install and they look good right next to my roller guides



by:

Installed them a few hours ago and am finally able to see my keyboard to review. Bright , very bright. Don’t look directly at them while your wife presses the brake pedal , it’s like looking into the sun !



by:

Light look great, not much for instructions but was simple enough. product is 5 start, etrailer delivery service is 1 start, if you need product on time I would suggest shopping at another sight!



by:

Simple to install and 100% better than what came with the trailer. If I knew then what I know now...I would have replaced the lights years ago before I had to deal with a replacement at an inopportune time.

Ew

8/10/2022

Continues to work like new. Dependable lights that I can count on.



by:

Great LED lights. Great upgrade.



by:

As I have always said etrailer is the only go to for all my trailer parts…….everything I have ordered came on time and was exactly what I ordered



by:

Very nice product, but one of the lenses have small scratches on it, I will try some Plexus to see if I can make look new again. But overall a nice product.



by:

Working fine, great product



by:

Works great, easy install. Only drawback is the ground wires are slightly short.



by:

Easy to hookup, very bright.



by:

Decided to change all the lights on my boat trailer to LED. These were easy to install, and work well.



by:

Package delivered promptly. Appeared packaged well. Lights installed easily and operate without issue whatsoever. I decided to purchase this particular brand from this particular retailer because of the lifetime warranty on the LEDs and etrailer's positive reputation.

I am, however, a little disappointed that the lens of one of the lights looked a little scuffed up... as if it had been rubbing against the inside of the plastic packaging. I know things like this don't remain pristine forever, but when you purchase something new you want it to look that way!



by:

Nice looking product. Quick delivery.



by:

The Optronics LED Combination Trailer Taillights are still working like new after 1 year. They are very bright for extra safety when stopping and pulling a Trailer on the expressway. I highly recommend them.



by:

Looks great-



by:

Good lights. All ready installed on my utility trailer


25
626
Show More Reviews

See what our Experts say about this Optronics Trailer Lights

  • Upgrading To LED Trailer Lights For a Heritage Trailer Carrying 2003 Lund Fisherman Boat
    The Optronics LED Combination Trailer Tail Lights # TLL160RK will replace your tail lights for LED on your Heritage trailer. If you are able to remove the clearance lights from their bases we have the following Amber/Red lights below. Thinline LED Clearance and Side Marker Light Amber # AL91AB, Red # AL91RB Miro-Flex LED Clearance or Side Marker Light Amber # AL191AB, Red # AL191RB Thinline LED Mini Clearance and Side Marker Light Clear Lens Amber # AL91CAB, Red # AL90RCB
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Replacement Rear Taillights and Clearance Light Bar for Boat Trailer
    The lights will need to be replaced, we have some great options for this. The Optronics LED Combination Trailer Tail Lights part # TLL160RK looks to be a great match for your existing taillights and the Custer Trailer LED Clearance Identification Light Bar part # CPL26R-3BAR looks to be a great replacement for the rear light bar. These are LED's so they will burn brighter and last longer than incandescent.
    view full answer...
    Image 1 for Image 2 for
  • Connecting Ground Wires From Optronics 25' Trailer Wiring Harness With Tail Lights Ground Strap
    You have 2 options for your 25 Ft 4-Way Trailer Wiring Harness # A25W2GWB when wiring in the Optronics LED Combination Trailer Tail Lights # TLL160RK. First is the way I recommend since the harness has the full length ground wires is to cut off the eyelet on the tail lights and wire the ground from the tail lights to the harness. Heat Shrink Butt Connectors # DW05744-10 are the best option for a weather tight connection. If you have any side marker lights they will also need connected...
    view full answer...
  • Replacement Tail Lights for 2019 Palomino Solaire 268BHSK
    Yes, you can use the # TLL160RK on your 2019 Palomino Solaire 268BHSK without having to modify the rear of the trailer. These are surface mount lights so they can sit where the old lights were located. If you want an exact replacement it looks like it originally came with the # RVSTLB61 and # RVSTLB60.
    view full answer...
  • 4-Way Flat Wiring Harness and Submersible Tail Lights For a Boat Trailer Over 80" Wide
    The 25 Ft 4-Way Trailer Wiring Harness # A25W2GWB you found is going to have the 3 wires which run down each side of the trailer. One wire on each side is going to be a ground wire(white), the 2nd wire(brown) is going to be for the running lights and side marker/clearance lights and the 3rd wire(green or yellow) is going to be for the turn signal/brake lights for each side of the trailer. The Optronics LED Combination Trailer Tail Lights # TLL160RK are submersible and the correct size needed...
    view full answer...
  • How to Tow a Trailer with Reverse Lights 2013 Nissan Leaf
    Yes, the LED Trailer Light Kit part # TL16RK, Light Guide LED Backup Light part # BUL602CB, 25 ft. Wishbone 5-Way Trailer Harness part # A25W5B, and Right Angle 3-Wire Pigtail for Optronics Trailer Lights part # A47PB will all work together and give your trailer reverse lights. The Submersible Tail Light Kit part # TLL36RK comes with a 4-way wiring harness and since you will be using a 5-way wiring harness, the more cost effective solution would be to purchase the Waterproof, Over 80"...
    view full answer...
  • Replacement Tail Light Lenses For Kenway Trailer Lights # 64274 From Harbor Freight
    With your Kenway trailer light 64274 being from Harbor Freight I do not see a specific lens which is compatible. It is very similar in size and design to the Optronics LED Combination Trailer Tail Lights # TLL160RK. We do have replacement Lenses # A16RB which fit these lights and may also fit your tail light from Harbor Freight. The mounting holes are going to be separated 7-1/4" by 2-3/8" which you can compare to yours to see if it will also fit. Otherwise I recommend replacing the lights...
    view full answer...
  • Looking For Tail Light To Replace Monarch 5236 Lights
    Hello Robert. I looked up these monarch 5236 tail lights and from what I can see, this particular light is obsolete. We do have a good replacement option for you, but we do not offer a direct replacement. Our closest LED taillight assemblies we carry are the part # STL17RB for the driver side and part # STL16RB for the passenger side. These lights measure 8-1/16" long x 2-7/8" wide x 2-13/16" deep.
    view full answer...
  • Replacement Tail Lights For A 2021 Diamond City Trailer
    Hey Don, The STL0016RL16B part number they gave you is just both the driver and passenger side lights bundled together. The # STL16RB and # STL0016RB part numbers are just the specific sides sold separately. We use part # TLL160RK for them both together in one kit.
    view full answer...
  • Are Special Tail Lights Needed for Boat Trailer With Wishbone Trailer Wiring Harness
    The tail lights will be the same for a wishbone trailer wiring harness and a standard wiring harness, the only difference is that instead of splicing the two running light wires in together before running the main lead up to the trailer connector, you simply run one for each side up to the trailer connector. The Optronics LED Combination Trailer Tail Lights part # TLL160RK are a great set of submersible tail lights but I have attached a full list of options below.
    view full answer...
  • Complete LED Lighting and Wiring Kit for a Trailer Over 80 Inches Wide
    Yes, we do have the complete kit with all the wires and lighting you will need to rewire and set your trailer up with new lights. We have two options depending on the amount of side marker lights you want. The first is the LED Combination Trailer Tail Lights - Submersible - Driver and Passenger Side - 25' Wire Harness item # TLL16RK and the Optronics Trailer Light Kit for Trailers over 80" Wide - Submersible - 25' Wiring Harness item # TL16RK. I have linked an installation video that will...
    view full answer...
  • Upgrading Lights on 2000 Tracker PT175 Trailer to LED
    We do offer a wide variety of replacement lights for trailer but since trailer manufacturers don't keep a record of what they use on trailers I would need some pictures of the lights you are wanting to replace along with some measurements so I can be sure to recommend the correct parts.
    view full answer...
    Image 1 for Image 2 for Image 3 for Image 4 for
  • Replacement Tail Light and Lenses For a 2020 Load Rite LR-AB21T5200102TB1 Boat Trailer
    Based on images I could find on your 2020 Load Rite trailer it appears you have the Optronics LED Combination Trailer Tail Lights # TLL160RK from the factory. While I am unable to confirm exactly what lights you have based on your VIN information you can compare these with your lights to determine if the Replacement Lenses # A16RB. We also have the Driver # STL17RB and Passenger # STL16RB side assemblies if your housing is also damaged.
    view full answer...
  • How to Determine Correct LED Tail Lights For Ranger Boat Trailer
    We don't have any way of knowing specifically what tail lights are on a 2003 Ranger boat trailer, but can lead you in the right direction. To determine the correct replacements, you will simply need to measure your current tail lights and find the one that most closely matches your measurement, and also know if your lights are surface mounted or recessed mounted. For example, the Optronics LED Combination Trailer Tail Lights # TLL160RK are 8-1/16" long x 2-7/8" tall x 2-13/16" deep and...
    view full answer...
  • Adding a 7-Way Trailer Connector to a Trailer
    So you have added a 7-Way trailer connector to your truck and now you want to add one to the trailer. There are a couple of options that you could employ. First, you could just use a 7-Way trailer connector only such as # PK12706, no wiring, and attach the wires from the old connector and the new wires as needed. Or you could use one that has a wire lead coming out of the back of it such as # H20043 (wire functions listed on its product page). You could also use # HS381-9000 which comes...
    view full answer...
    Image 1 for
  • How Does LED Lifetime Warranty Work on Optronics LED Combination Trailer Tail Lights
    Hi Rob; the lifetime warranty covers the LEDs in the Optronics LED Combination Trailer Tail Lights # TLL160RK. Assuming you buy them through us, you would be able to call our customer service if one of the LED lights failed and we would get you a replacement.
    view full answer...
  • Replacement Lens for Optronics Trailer Taillight Kit TLL160RK
    For a replacement lens for the trailer taillight kit part # TLL160RK you'd need the part # A16RB.
    view full answer...
  • Determining If Optronics LED Tail Lights TLL160RK Fit A 2006 Tracker Trailstar Trailer
    It is possible that the Optronics LED Combination Trailer Tail Lights - Submersible - 40 Diodes - Driver and Passenger Side # TLL160RK you were looking at will replace the tail lights on your 2006 Tracker Trailstar trailer, but we do not have a break down of the specific components used on a trailer so you will need to measure your current tail lights. As long as your current tail lights are 8-1/6" long x 2-7/8" wide and use two studs on the back to mount the lights to the trailer this...
    view full answer...
    Image 1 for
  • LED Light Recommendation for Converting Lights of 2001 Ford Ranger Boat Trailer
    You can certainly use the Optronics kit # TLL160RK for your boat trailer. These tail lights are great for marine trailers as they are sealed and have a waterproof construction. This kit includes 2 red LED tail lights. These lights will need to be hardwired to your trailer, and have a separate ground wire. For some LED clearance lights the part # MCL32AB would work as well.
    view full answer...
  • Rectangle LED Trailer Taillight Kit Recommendation for Boat Trailer
    The kit we offer that is the closest to what you listed would be the Waterproof LED Submersible trailer taillight set part # TLL160RK. These are a bit bigger than what you mentioned but in most cases would work just fine as a replacement. I attached a picture with dimensions.
    view full answer...
    Image 1 for
  • Solution for Towing Trailer with Separate LED Tail Lights
    Since your trailer has LED taillights we don't have a converter that will work. Normally we recommend the part # C56196 but this does not work with LED bulbs. Most likely have a converter already installed on the trailer wiring if it has been used before since combined is the normal trailer wiring on vehicles and trailers. To go to a combined taillight assembly on your trailer you could also use the part # TLL160RK.
    view full answer...
  • What is a Good Replacement for the Wesbar 105826?
    With the 105826 being discontinued from Wesbar, the closest thing available is the Optonics set up # TLL160RK. This is very similar to what you currently have, and is LED like you're wanting, but it would need to be hardwired as it does not have the plug on the end of the wires.
    view full answer...
  • Does it Matter Which Post of Optronics Trailer Taillight # TLL160RK Ground Terminal is Ran to
    It does not matter which mounting post of the Optronics Trailer Taillight part # TLL160RK that you run the ground ring terminal to. As long as it ends up making contact with the trailer frame that is all that matters.
    view full answer...
  • Replacement Rear Tail Lights For A Z21 Boat Trailer
    Without knowing what brand of light you have and the dimensions of the current light you have on your Z21 boat trailer I would not be able to find you an identical light. I would recommend replacing both taillights. The Optronics LED Combination Trailer Tail Lights # TLL160RK are designed to serve 7 functions on your trailer: Stop, tail, turn, side marker, side reflex, rear clearance, and rear reflex. The lights are submersible. These lights have a durable surface-mount technology construction...
    view full answer...


< Previous
123. . .6



Do you have a question about this Trailer Light?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Cole B
Installed by:
Cole B
Employee Adam E
Installed by:
Adam E
Employee Amy B
Updated by:
Amy B
Employee Brian T
Updated by:
Brian T
Employee Justice A
Updated by:
Justice A
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Written by:
Wilson B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924