bing tracking image
  1. Trailer Lights
  2. Optronics
  3. Tail Lights
  4. Rectangle
  5. Kit
  6. LED Light
LED Combination Trailer Tail Lights - Submersible - Driver and Passenger Side - 25' Wire Harness

LED Combination Trailer Tail Lights - Submersible - Driver and Passenger Side - 25' Wire Harness

Item # TLL16RK
lowest price pledge
Retail:$97.60
Our Price: $57.08
You Save: 42%
Trailer Lights
Orders above $99 qualify for Free Shipping
Shipping Weight: 3 lbs
Quantity: 
In Stock
TLL16RK - Red Optronics Trailer Lights
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
8-1/16" x 2-7/8" Rectangle. Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers. Surface mount - hardware included. 3-Wire pigtail. 25' Wiring harness. Lowest Prices for the best trailer lights from Optronics. LED Combination Trailer Tail Lights - Submersible - Driver and Passenger Side - 25' Wire Harness part number TLL16RK can be ordered online at etrailer.com or call 1-800-496-5010 for expert service.
  • All Info
  • Reviews (173)
  • Q & A (0)
  • Photos
  • Why etrailer?

Optronics Trailer Lights - TLL16RK

  • Tail Lights
  • Rectangle
  • Kit
  • LED Light
  • Red
  • 8L x 3W Inch
  • Surface Mount
  • Stop/Turn/Tail
  • Rear Clearance
  • Side Reflector
  • Rear Reflector
  • License Plate
  • Submersible Lights
  • Optronics

8-1/16" x 2-7/8" Rectangle. Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers. Surface mount - hardware included. 3-Wire pigtail. 25' Wiring harness.


Features:

  • Rectangular combination tail lights are designed to serve 7 functions on trailers over 80" wide when properly mounted
    • Stop, tail, turn, side marker, side reflex, rear clearance, and rear reflex
    • Built-in license plate light on driver's-side light illuminates license plate
  • Sealed, waterproof construction is submersible
    • Designed for marine trailer applications
  • Durable surface-mount technology (SMT) construction of LED circuit board
    • Better withstands shock and vibration
    • Allows for improved heat distribution
  • LEDs make great replacements for incandescent lights
    • Last 50 times longer
    • More efficient - provide brighter light with less power output
    • No bulbs to replace - no brittle filaments
  • Red acrylic lens screws on and can be easily replaced
  • Molded plastic housing
  • Mounts on surface of trailer - stainless steel hardware included
    • Includes license plate bracket for mounting driver's side light
  • 3-Wire pigtail
    • 25-Ft Wiring harness for making connections
  • DOT compliant
    • Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting
  • P2PC rated


Specs:

  • Configuration: driver side (STL17RB)
    • Passenger side (STL16RB)
  • Dimensions: 8-1/16" long x 2-7/8" tall x 2-13/16" deep
  • Diodes: 40
    • Driver's-side light: 22 diodes
    • Passenger's-side light: 18 diodes
  • Power draw at 12.8 volts:
    • Stop/turn signal light: 0.259 amps
    • Tail light: 0.062 amps
  • Lifetime warranty on LEDs


Optronics STL16/17 Series LED Combination Marine Tail Light Measurements

Sealed, Waterproof Trailer Light

The waterproof construction of these lights make them ideal for use on trailers that may be submerged, like a boat trailer. Each circuit board is sealed, which means that water will not damage the diodes or circuit board.


Combination Lights for Trailers Over 80" Wide

Flatbed trailer over 80" wide with combination tail lights

If a trailer is 80" or wider at its widest point, then it requires rear clearance lights in addition to basic trailer lights. These clearance lights indicate the width of the trailer when it is viewed from the back.


To meet these requirements on a flatbed utility trailer where the bed extends past the wheels, you can install combination trailer lights that include the rear clearance function. For proper mounting, the lights must be installed at the widest points on the rear of the trailer - one on each corner.


PC-Rated Lights

Diagram of light spread for PC rated light

A PC-rated light produces a 90-degree angle of light to either side of its centerline for a total of 180 degrees of coverage. This beam pattern can be clearly seen when you are standing directly in front of the light, as well as when you are standing on either side of the light. When properly installed, this type of light can function as both a front clearance light and a side marker light or as a rear clearance light and side marker light.



TLL16RK Optronics LED Combination Tail Lights for Marine and Boat Trailers over 80" Wide - Submersible - Driver and Passenger Side - 25' Wire Harness

Alternate part number: TLL-16RK




California residents: click here



Customer Reviews

LED Combination Trailer Tail Lights - Submersible - Driver and Passenger Side - 25' Wire Harness - TLL16RK

Average Customer Rating:  4.8 out of 5 stars   (173 Customer Reviews)

8-1/16" x 2-7/8" Rectangle. Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers. Surface mount - hardware included. 3-Wire pigtail. 25' Wiring harness.

by:

I needed an extra set of stop/turn lights for a bike rack. You couldn’t see the existing lights when I put a bike cover on. Problem solved. Very bright. Works and looks as described.




by:

I built a small trailer to use at the farm and road capable, i bought all my parts from etrailer including the light kit, works great and have always been pleased with the service provided by etrailer




by:

The LEDs arrived very quickly. They were a perfect fit for the old incandescents they replaced making the installation quick and easy. Thank you!


Comments
They are still working perfectly! Great not having to worry about my trailer lights while i tow my boat
Terry P - 05/22/2015


by:

The trailer lights got delivered this morning and on the waverunner trailer this afternoon. Easy to install and are a lot better than the stock lights I removed to put these on. Thumbs-up to etrailer.




by:

Awesome quality and very bright. These are truly waterproof and work great after over a year of being frequently submerged in water while launching my boat.




by:

My new F150 was telling my LED trailer light had a fault. Although they worked. I installed these and truck isn’t giving warning anymore. These lights work great. Very bright. Also lighter then previous LED trailer lights.




by:

Product arrived when I was told it would and was able to replace old lights in just a few minutes , thanks




by:

Super easy to install.




by:

Lights very well made wiring and hardware good quality easy to install.


Comments
Working fine no issues!
Kenneth - 12/12/2021


by:

Nice and bright. Submersible and functional. Great product.




by:

It is a good kit, was easy to install and the led’s are great lights, I put these on my neighbors trailer for letting me borrow it to get some cedar posts.




by:

Easy install. Lights still working great after 1 year of use.


Comments
No issues. Lights still working perfectly after one year
John B - 03/25/2022


by:

If you are upgrading to LED , make sure to check you current trailer wiring. This is a 5 pin flat connector with a short piece of wire for the ground. 2 -left /2 -right... The LED lights require 3 wires...hence you have to attach the white remaining wire (short piece with an wire lug) to the trailer frame or run an additional wire for ground...




by:

Great product, Fast shipping




by:

I have always received great service and will always use etrailer.




by:

Bought this kit to replace a failed set of waterproof filament type boat trailer lights. This is my second purchase of LED lights, I love how bright they are. Total cost of this complete LED set was only a few dollars more than the cost of replacing just one failed filament bulb in a sealed pod set. With six trailers at my place, I see many more LED sets in my future! As always, good price and fast shipping from etrailer.com.


Comments
Working fine, nice and bright. etrailer.com is still my go-to source for all things trailer.
Norm C - 06/09/2018


by:

Works well but id prefer the wires to be longer and packaged more secure. One of the 3 tabs on the package were unsecured and the 2 taillights were it contact with one another. Luckily no damage. this could've happened when USPS threw the package over my front gate when delivering




by:

I give the product a good rating So far. I'm not finished yet but it's coming along. The negative to me is the instructions. First is the size of printing (small and unreadable) of the combined picture of the trailer and electrical schematic (2" x 1"). It is very hard to follow and understand. Helpful tips would be a good idea. The added rear light bar I ordered needs some attention as to mounting and wiring. I think once I get through with the wiring and assembly I will be happy. All the lights and mounting technique seems well done.


Comments
If you need some assistance with the install, were just a phone call away. If you use the provided link, you can see some trailer wiring diagrams and a help article that will provide more information for you.
-- Etrailer Expert Mike L - 07/11/2018


by:

Thanks for this 1 year review opportunity. My purchased was changing all my boat trailer lights to LED. They are working excellently with no problems. I think they are better than what I see on newer boat trailers. Thanks for your excellence advice, service and prompt shipping.


Comments
All LED lights continue to work perfectly. I remain very satisfied about the product and service from etrailer.
John G - 09/14/2020


by:

Great product! 1 year and still works p erfectly.




by:

This kit was fantastic. It was easy to install. I made a few mods, like soldering all the wire connections, then taping them. The lights are so much better than the incandescent ones I had before. Very pleased with this kit and etrailer. Resonable price and fast shipping were the icing on the cake.


Comments
Its been a year, and I couldnt be happier with these tail lights. I highly recommend them and etrailer. Thanks again.
Daniel G - 06/09/2017


by:

This is a good deal. I used this package to re-wire my entire trailer. The one I bought was 18 gauge. You couldn't find the wire size anywhere in the description, so I hope that info helps somebody. You are required by law to have certain lights and reflectors on your trailer. In addition to tail and brake lights, these two tail lights contain 7 required fixtures, 4 reflectors, license plate light, and rear side lights. The plastic license plate holder is perfect. It flexes/swings as you put your boat in and out of the water, so your plate won't bend. I used the little blue quick connectors to add the sidelights to this harness. I used plenty of grease at my connections and liquid electric tape to seal them. No problems so far!




by:

Nice bright lights! Easy to install. These units on my 2002 trailer replaced Wesbar units of almost the same size and the mounting holes were the same size and pitch. The old incandescent Wesbar lights would have been easier to replace with LED units from the same manufacturer as they had quick connection plug-ins in the harness. The new ones did not and I had to cut out the plugs from the harness and solder the wires together. I did not replace the wiring harness with the one that was supplied but will keep it for a spare for the future.
The light assemblies have openings in the back face. It would have been nice if they were completely sealed to keep out mud and water thrown up from the trailer wheels. This will require that you remove the lens from time to time to clean them. This is a problem that caused me to be pulled over by police for dim lights last year. Hopefully the brighter LED's will prevent this.
All in all, a nice product for the price though.




by:

Great experience on etrailer + shipping, but the length of the wire assembly was incorrect. When I read 25' of wire, I expect I would have at least 25 feet from the lights to the connection on the truck. It is 25' if you connect the male and female together which then leaves you with no connection at the truck. I will either now have to splice in the wire (8 new potential break points), get a new male connector for the truck (leaving another connection point failure, or get new wire harness. I wish a longer wire kit was recommended at purchase vs. butt connectors that were too big.

BTW- The lights look great, but the wiring and the connections leave a lot to be desired.




by:

Lights are very bright, which what I was looking for. Instructions were good and installation was easy. I would have given the product an excellent rating if the kit would have included heat-shrinkable wire connectors instead of wire nuts. Wire nuts don't seem like a very good idea for a submersible wiring harness, so I soldered and used shrink wrap. I would recommend the kit and eTrailer to a friend. This is the third time I have purchased from eTrailer. Delivery and service has always been great!



25
173
Show More Reviews

See what our Experts say about this Optronics Trailer Lights



  • Complete LED Lighting and Wiring Kit for a Trailer Over 80 Inches Wide
    Yes, we do have the complete kit with all the wires and lighting you will need to rewire and set your trailer up with new lights. We have two options depending on the amount of side marker lights you want. The first is the LED Combination Trailer Tail Lights - Submersible - Driver and Passenger Side - 25' Wire Harness item # TLL16RK and the Optronics Trailer Light Kit for Trailers over 80" Wide - Submersible - 25' Wiring Harness item # TL16RK. I have linked an installation video that will...
    view full answer...
  • Gauge of Wire Used in the Waterproof, Over 80" LED Trailer Light Kit # TLL16RK
    According to Optronics the gauge of wire used in the Waterproof, Over 80" LED Trailer Light Kit with 25' Wiring Harness # TLL16RK is 20 gauge. This may seem like a very light gauge (it is), but when you consider that these lights are LEDs which draw a very small amount of amperage it is more than adequate.
    view full answer...
  • Replacement Side Marker Lights for a 2000 Tracker Trailstar Boat Trailer
    I pulled up some pictures online of what appears to be your boat trailer and it looks like there is a cutout on the fenders that will allow a light to install with a grommet. Without knowing what size the lights are the best option I can give you would be to check out the link I attached that will take you to a page that has all of the oval shaped, recessed mount trailer taillights we offer. You will want to select your light size from the filters and the correct lights will be listed.
    view full answer...
  • Where Does the White Wire Go on Over 80 Inch LED Trailer Tail Light Kit # TLL16RK
    On a trailer, the white wire will need to be attached to a clean and corrosion free bare metal surface on the trailer frame near the coupler. One tip I can add with light kit # TLL16RK is to run jumper grounds from the light to the trailer frame on the side with the license plate holder because the holder can interfere with a good ground connection. I have incldued a link to a video showing a typical installation.
    view full answer...
  • What Are Dimensions of Optronics LED Light Kit # TLL16RK
    I pulled the Optronics LED Trailer Light Kit, part # TLL16RK, from our warehouse and measured the outside dimension. I shot a little video as I measured the lights for you to check out. The outside dimensions of the lights measure approximately 8 inches by 2-3/4 inches. There are not any amber reflectors on this light kit, perhaps you are referring to another kit. Part # TLL16RK has red reflectors on the side.
    view full answer...
  • How to Determine What Trailer Lighting is Required Based on Dimensions of the Trailer
    To determine what you will need as far as trailer lighting is concerned you will need to go out and measure the dimensions of your trailer. Once you know the overall length and width check out the FAQ article I attached to the right. It will walk you through how to determine what lighting is required for your trailer. Most likely the # TLL16RK would be all that you would need to legal, but check out the FAQ first. If your trailer already has wiring run for trailer lights you would only...
    view full answer...
  • Converting Karavan Trailer Incandescent Taillights to LEDs
    One way to add LED lighting to your Karavan trailer is to replace the entire light assembly, and we do carry replacement LED-type lights for many applications. The linked page displays all of our complete rectangular light units with LED operation. Another way to go is to check whether there is an LED replacement for the incandescent bulbs in your existing lights. We have LED replacements for many popular bulb types. The other linked page will allow you to click on your existing bulb...
    view full answer...
  • Recommended LED Lights For MaxxTow Aluminum Cargo Carrier For 2-Inch Hitches
    We do not have any specific light kits for your MaxxTow Cargo Carrier MT70422, but I do have a solution for you. I recommend part # TLL16RK. This includes LED lights for both sides of the cargo carrier and also the wiring needed to plug into your vehicle. Mounting hardware is included but with the cargo carrier rails you may need to buy longer hardware to secure the lights to the carrier.
    view full answer...
  • What Gauge and Composition Are the Wires on the LED Combination Trailer Tail Lights by Optronics
    I reached out to my contact at Optronics and they were able to give me some additional information on this light set. The LED Combination Trailer Tail Lights # TLL16RK have full copper wires that are 18 gauge wires.
    view full answer...
  • Troubleshooting part # TLL16RK not Illuminating
    We can get you set! To answer your question the wires on the LED Combination Trailer Tail Lights part # TLL16RK are going to be Brown= tailight Green= turn and brake White= ground The white wire is where I believe the problem lies. Since the entire housing is not lighting it is the likely the ground wire is not getting a good connection to the frame of the trailer. It could have been incorrectly wired but after confirming that is correct the ground would be my next stop. You want...
    view full answer...
  • LED Trailer Taillight and Wiring Kit for Military Trailer
    We have the Waterproof, Over 80" LED Trailer Light Kit with 25' Wiring Harness # TLL16RK that would basically come with everything you'd need. It comes with two LED trailer taillight assemblies, all new wiring for them and the trailer, and then a 4-way connector for the front of the trailer. I attached an install video for this kit for you to check out as well.
    view full answer...
  • Trailer Taillight and Wiring Kit Recommendation for 1994 Four Winn Boat Trailer
    For that we have the Waterproof, Over 80" LED Trailer Light Kit with 25' Wiring Harness # TLL16RK which comes with all new wiring, taillight assemblies, and a license plate bracket.
    view full answer...
  • Will Waterproof, Over 80" LED Trailer Light Kit with 25' Wiring Harness Fit Karavan Boat Trailer
    Yes, the Optronics taillight kit part # TLL16RK would work great on your Karavan trailer. This is a standard style of trailer taillight that would work great on your trailer. I attached a picture of it install on a similar boat trailer.
    view full answer...
    Image 1 for
  • Trailer Taillight Kit for Tracker Boat Trailer
    I wasn't able to find a decent picture of the boat trailer you have so it's hard to say for certain what would be an exact replacement. We do have kits that work great on boat trailers like yours with the part # TLL16RK which we've installed on similar boat trailers that would be an excellent option. I attached an install video for this kit on a smaller boat trailer for you to check out as well.
    view full answer...
  • LED Trailer Light Kit for 1995 Four Winns Trailer
    For a standard RV led trailer taillight kit the part # TLL16RK that you referenced would work great. It comes with new wiring, connectors, a license plate bracket as well as two waterproof and very visible LED trailer taillights.
    view full answer...
  • Replacement Taillights for 2003 Heritage Trailer
    We carry all sorts of complete trailer lights as well as replacement parts for most major brands like Optronics, Petersen and Bargman. If you can remove one of the existing light bases you may be able to find a brand and/or part number that will usually be helpful for finding an exact replacement if one is still available for your 2003 Heritage. If not we can help you with a new lights. On the linked page you can view all 8 x 3-inch rectangular submersible trailer taillights. This is the...
    view full answer...
  • The Difference Between the Optronics # TLL16RK and # TLL36RK Lights
    You are right, there is not much of a difference between the Optronics # TLL36RK light and Optronics # TLL16RK light. The largest difference is the # TLL36RK does have amber lights, as you realize, and the red trailer lights with # TLL36RK have 17 LED lights compared to the 25 LED lights on the # TLL16RK red lights. Also the # TLL16RK red trailer lights are an inch larger than the # TLL36RK lights. Other than those differences, both lights come with a license plate mounting bracket...
    view full answer...
  • Would Optronics Light Kit TLL16RK Be Recommended Taillight Kit for Toy Hauler
    Our opinion would be you are on the right track! The Optronics light kit part # TLL16RK would be a great option as it is LED and has a license plate light built into it that you would mount over the included license plate bracket. For a version that includes a couple LED clearance lights you would want the part # TLL36RK instead.
    view full answer...
  • Over 80 inch Wide LED Trailer Taillight Kit for 1998 Shorelander Boat Trailer
    We do have an over 80 inch LED trailer taillight kit that's submersible and would work great on your 1998 Shorelandr boat trailer as the part # TLL36RK. This comes with the LED taillights you want, clearance lights, license plate bracket and wiring/connectors so it's all you'd need.
    view full answer...
  • What is Difference Between Optronics Trailer Taillight Kit TLL16RK and TLL160RK
    The two kits both have the same taillight but the part # TLL160RK only comes with the two light assemblies whereas the part # TLL16RK comes with additional wiring to from the front of the trailer to the rear as well as a license plate bracket. Basically one kit is for replacing everything on the trailer and other is for just the lights.
    view full answer...
  • Is an Over 80 or Under 80 Trailer Light Kit Needed for a Tow Dolly
    The 80 inches in question is the overall width of the trailer, or in this case, a tow dolly. Even if a trailer or tow dolly is under 80 inches, you can still use an over 80 inch light kit if you wanted to. But a trailer that is over 80 inches cannot use an under 80 kit because it will not meet the requirements. For over 80 inches you can use # TLL36RK or # TLL16RK.
    view full answer...
  • Replacement Trailer Taillight and Wiring Harness for Boat Trailer 4 Winns 180
    We have taillight kits that utilize the same trailer lights you have now like with the part # TL16RK which comes with clearance lights or the part # TLL16RK which only comes with the rear taillight assemblies that are stop/turn/tail. The lights are also all LED which will draw less power and be more reliable. The wiring harness that comes with it is 25 feet in length and can easily be cut down as needed. It's definitely something anyone could handle as it's not too hard at all. I attached...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Availability of Bundle of all Trailer Tail Lights and Wiring
    It is definitely possible. We have an all-in-one kit, the Optronics Waterproof Light Kit with Wiring Harness part # TLL16RK. The lamps included in this kit are very similar to the Wesbar lamps you referenced. The kit comes with with 2 universal-mount, waterproof LED tail lights, a license-plate bracket, a 25-foot wiring harness with 4-pole connector and mounting hardware. For prices please check out the product page. I have included a link to a video of the installation of the trailer...
    view full answer...
  • Do Trailer Lights Have Light for License Plate
    We sell trailer taillight kits that have a driver and passenger side and the one of them will have a clear lens on the bottom for illuminating a license plate. The part # TLL16RK comes with two lights, one with a license plate light, a plate bracket, and wiring which would work well. The capsule you found are no longer available unfortunately.
    view full answer...


< Previous



Do you have a question about this Trailer Light?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer lights for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer light information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Reno H
Expert Research:
Reno H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Sarah H
Expert Research:
Sarah H
Employee Andrew K
Video Edited:
Andrew K
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Tyler C
Written by:
Tyler C
Employee Joshua S
Video by:
Joshua S
Employee Schuyler H
Video by:
Schuyler H
Employee Adele M
Updated by:
Adele M
Employee Wilson B
Updated by:
Wilson B
Employee Brian T
Updated by:
Brian T
Employee Noah M
Updated by:
Noah M
Employee Cole B
Installed by:
Cole B
Employee Brent H
Installed by:
Brent H
Employee David F
Installed by:
David F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.