bing tracking image
  1. Camper Tie-Downs
  2. TorkLift
  3. Rear Tie-Downs
  4. Frame-Mounted
  5. Powder Coated Steel
  6. Custom Fit
TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear

TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear

Item # TLR3510
Retail:$414.99
Our Price: $378.99
You Save: $36.00
Camper Tie-Downs
This item qualifies for Free Shipping
Shipping Weight: 28 lbs
Quantity: 
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Ready your truck to haul a camper with these sturdy tie-downs. Inserts slide into frame-mounted brackets for use and easily remove for a clean, unobtrusive look. Custom designed for your vehicle. 1-636-306-4830 to order TorkLift camper tie-downs part number TLR3510 or order online at etrailer.com. Free expert support on all TorkLift products. Great prices and Fastest Shipping for TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear. Camper Tie-Downs reviews from real customers.
  • All Info
  • Reviews (1081)
  • Q & A (0)
  • Videos (1)
  • Photos
  • Why etrailer?

TorkLift Camper Tie-Downs - TLR3510

  • Rear Tie-Downs
  • Frame-Mounted
  • TorkLift
  • Powder Coated Steel
  • Custom Fit

Ready your truck to haul a camper with these sturdy tie-downs. Inserts slide into frame-mounted brackets for use and easily remove for a clean, unobtrusive look. Custom designed for your vehicle.


Features:

  • Tie-downs provide attachment points at the rear of your truck bed for securing a bed-mounted camper
    • Front tie-downs sold separately
  • Frame-mounted design ensures excellent handling
    • Securing camper to truck's base instead of its bed better distributes weight to keep setup from being too top-heavy
  • Virtually undetectable when they're not in use
    • Tie-down inserts can be easily removed from frame-mounted receiver brackets with included pins
  • Custom fit for your vehicle
    • Brackets fit tight to truck frame - no loss of ground clearance
  • Powder coated steel construction
  • 2 Rear tie-down inserts, frame brackets, and necessary hardware included
  • Made in the USA
  • Lifetime warranty


R3510 Tork Lift Tie Down - Rear Frame Mount - SuperHitch Application



This Product Fits The Following Vehicles

  • 2019 - 2022 Ram 2500 6-1/2 Foot Bed - with board or step extending under bed and with a TorkLift SuperHitch Magnum 30K
  • 2019 - 2022 Ram 2500 6-1/2 Foot Bed - with board or step underneath cab and with a TorkLift SuperHitch Magnum 30K
  • 2019 - 2022 Ram 2500 6-1/2 Foot Bed - without board or step and with a TorkLift SuperHitch Magnum 30K
  • 2019 - 2022 Ram 2500 8 Foot Bed - Crew Cab - with board or step extending under bed and with a TorkLift SuperHitch Magnum 30K
  • 2019 - 2022 Ram 2500 8 Foot Bed - Crew Cab - with board or step underneath cab and with a TorkLift SuperHitch Magnum 30K
  • 2019 - 2022 Ram 2500 8 Foot Bed - Crew Cab - without board or step underneath truck bed or cab and with a TorkLift SuperHitch Magnum 30K
  • 2019 - 2022 Ram 3500 6-1/2 Foot Bed - with board or step underneath cab and with a TorkLift SuperHitch Magnum 30K
  • 2019 - 2022 Ram 3500 6-1/2 Foot Bed - without board or step and with a TorkLift SuperHitch Magnum 30K
  • 2019 - 2020 Ram 3500 8 Foot Bed - with board or step extending under bed and with a TorkLift SuperHitch Magnum 30K
  • 2019 - 2022 Ram 3500 8 Foot Bed - with factory electric board under cab and with a TorkLift SuperHitch Magnum 30K
  • 2022 - 2022 Ram 3500 8 Foot Bed - with fixed board or step under cab and with a TorkLift SuperHitch Magnum 30K
  • 2019 - 2022 Ram 3500 8 Foot Bed - without board or step and with a TorkLift SuperHitch Magnum 30K



Video of TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of TorkLift Camper Tie-Downs - Ram Truck Bed Camper Rear Tie-Downs - TLR3510

Micheal: Hi there, I'm Michael with etrailer.com. Today we're going to take a quick look at the Torklift custom frame mounted camper rear tie-downs. These are going to mount onto the frame of your truck at the rear of your vehicle. It's going to provide attachment points for your camper to be tied down so it can be sturdy. Having it mounted to your frame is going to make it a lot more reliable, extra secure, rather than having it tied to your side bed rails or in the bed of your camper or your truck. So if I we're to make an analogy, I'd say, obviously you feel more secure when you're standing on the bottom rung of the ladder, rather than on the top.

So it's kind of the same principle. The closer you can get to that frame, the more secure your camper is going to be. You're going to get a lot less movement.Having these attached directly to the frame of your truck is going to make your camper a lot more secure. So these are going to be a custom fit, and they're going to work with your 2019 and newer ram 2500 and 3500 with the six and a half foot bed or the eight foot bed. As long as you have the Torklift Superhitch Magnum 30 K hitch.

The reason you need that Torklift Magnum hitch is because these are going to attach to the hitch itself on your frame. So you're going to need that hitch on your ram to ensure that these will work for you, but once you get these installed, they are going to do a great job. As I was saying, because they are mounted onto your truck's frame, it's going to make that the camper less top heavy. So you're going to get less movement.These are really nice too, because they have the ability to be disconnected. So this portion up here is always going to be mounted on your truck's frame, but when you're not putting your camper in your truck bed, you can easily take out this arm here.

So this is going to sit where it's really not going to be a noticeable. Won't be able to see it. It'll be down under the body. Really won't notice it at all. It won't take away from the look of your truck, but then when you are ready to put your camper in, you can just simply insert this arm.

It's got a little pin here, it does have two different length settings, so right now it's in the longer of the two, sorry, the shorter of the two.And then you can extend it out to be longer if you have a wider camper that you need a little bit more clearance from your truck body for. So either way, it's going to provide that nice solid attachment point. This is a powder coated steel construction. So it's going to hold up well. That powder coat finish is going to help resist rust and corrosion, and that steel obviously is going to be very strong, durable. So it should last you a nice long time. You're going to get two tie-downs. These are the rear tie-downs. So they're going to sit at the back of your truck. The front tie-downs are sold separately. We do carry them here etrailer.com. You can find them using the part number that you see on the screen there. Those will mount at the front of your truck's bed to give you the front two corners. These will be the rear two corners.This set will include everything you need for these back tie-downs including instructions on how to get them installed. Your tie-down frame brackets and the inserts as well as hardware to get them installed. These are made here in the USA, so you can trust that they are going to live up to our expectations of products that are made here in the US and they do have a lifetime warranty. So if you we're to have any problems with them, you could give us a call. We'd be happy to help you out with that. We always want to make sure that our customers are having a good experience and getting quality products.And I think these are going to be a great quality product for you. I would get these for myself if it fit my vehicle, but I think these are going to do a great job, allowing you to make sure that your camper is held in place properly. So you don't have to worry about it moving around a lot as you're going down the road. That's going to complete our look for today. Again, I'm Michael with etrailer.com. Thanks for watching.

Customer Satisfaction Score:


Customer Reviews

TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear - TLR3510

Average Customer Rating:  4.8 out of 5 stars   (1080 Customer Reviews)

Ready your truck to haul a camper with these sturdy tie-downs. Inserts slide into frame-mounted brackets for use and easily remove for a clean, unobtrusive look. Custom designed for your vehicle.

by:

The mounts are everything they were advertised to be. Unfortunately it took etrailer a month to even ship it although they said that it was in stock.




by:

Easy to install. Fits perfect !




by:

You’re not gonna beat the quality or se rvice




by:

Wouldn’t use anything else




by:




by:




by:




by:

This has worked out great.




by:




by:




by:




by:




by:




by:




by:




by:




by:




by:

Review from a similar Frame-Mounted Rear in Camper Tie-Downs


The package arrived very quickly and intact. I have a 2020 Ford F250 SD Lariat short bed with a factory hitch. The tie-downs were really easy to install although the hitch adapter plate (see attached photo) which is supposed to attach to the end of the tie-down would not fit inside the tubing on my factory installed hitch so I installed without it and it is tight and snug


Comments
Thank you for your photo. Torklift does recommend to use the hitch adapter for the 2020 Ford F-250. The adapter does need to be turn horizontally to fit inside the hitch not vertically.
-- Etrailer Expert Heather A - 10/12/2022


by:

Review from a similar Frame-Mounted Rear in Camper Tie-Downs


My brother installed these and he used air tools. The brackets fit perfectly. The instructions were thorough. They bolted right in and the only delay was the disconnect/reconnect of the e-brake cable to install the driver's side bracket (2019 RAM 3500). After all the parts were laid out, he installed all 4 brackets in an hour.
He commented many times on the weight, high quality and PERFECT FIT of these brackets. These are worth the price and made in the USA.


Comments
These are still working perfectly.
Jennifer - 03/22/2022


by:

Review from a similar Frame-Mounted Rear in Camper Tie-Downs


I bought this when my previous belly bar and rear tie-down bent badly when our truck slid off the road into a steep ditch and our camper nearly tipped sideways off our truck. This product is a bit better then my old set up, but I expected something much better for this very high price. It wasn't too tough to install, despite the poorly written instructions. Also, the kit did not include a bolt fisher for the 7/16 bolt. The bolt fisher supplied was for a 1/2 inch bolt. Fortunately I had the correct bolt fisher from a previous project. I am also disappointed that the tie down hole has a slot cut in it which seems would significantly weaken it. I am not optimistic that the tie-down point will not bend or break if we have a similar significant side load such as when we slid into the ditch. I will probably weld the slot in the tie-down point shut to strengthen it.


Comments
They are starting to rust significantly. That is very disappoint considering the very high cost of these. It is interesting that they dont allow pictures of the product for this update.
Floyd D - 11/11/2021


by:

Review from a similar Frame-Mounted Rear in Camper Tie-Downs


Forklift tie downs are manufactured to exact fit to existing manufactured frame rail holes. They lined up perfectly and after 6000 miles with camper on board have stayed secure. The only downside, (this is relative to when and ware you use you camper) they will corrode when driving through snow covered roads that have been treated with sand and/or salt. I use an oil based product to protect them corroding.




by:

Review from a similar Frame-Mounted Rear in Camper Tie-Downs


Product was delivered as expected and installed according to the instructions. Disappointed with the coating/paint. Been in operation only a few months and the coating/paint is already coming off and starting to rust.




by:

Review from a similar Frame-Mounted Rear in Camper Tie-Downs


I had the mountings professionally attached to the frame. The hatches can be easily removed when not in use( and I would recommend that to keep them from being stolen). Using chains and turnbuckles, I feel very comfortable with my truck camper staying where it is.. does not rock, very solid.
It’s nice to feel secure about my camper staying firmly attached.
It was worth the investment.




by:

Review from a similar Frame-Mounted Rear in Camper Tie-Downs


Good fit to my vehicle.




by:

Review from a similar Frame-Mounted Rear in Camper Tie-Downs


Feel strong and solid with the camper but already seeing some rust in places. Wish the aluminum had been in stock.



25
1082
Show More Reviews

See what our Experts say about this TorkLift Camper Tie-Downs

  • Which Torklift Camper Tie Downs Fit 2019 Ram 3500 That Has OEM Electric Side Steps
    We have a set of Torklift Camper Tie Downs that fit your exact configuration of 2019 Ram 3500 long be with factory electric steps and factory hitch with the part numbers # TLD2140 for the front and # TLD3112 for the rear but the # TLR3510 is only the correct rear fit for if you had a Torklift hitch installed. If you had the Torklift hitch though this would fit and would still allow the step to function like normal without requiring you to remove it.
    view full answer...
  • Which Rear Torklift Tie Down to Use with SuperHitch on 2019 Ram 3500
    If you install the Torklift Superhitch Magnum part # TLD1111-30 on your 2019 Ram 3500 that currently has the rear tie down part # TLD3112 and a factory hitch you would need to replace the tie down with the part # TLR3510 according to Torklift. So yes you would need to replace the rear tie down at same time.
    view full answer...
  • TorkLift Super-Hitch and Tie Downs for my 2019 Ram 3500 6.5' Bed and Step Under the Cab
    We can get the kit you need figured out. Let's start with the hitch. For you 2019 Ram 3500 with the 6.5' bed use the TorkLift SuperHitch Magnum Trailer Hitch Receiver part # TLD1111-30. As far as the tie downs use the TorkLift Custom Frame-Mounted Camper Tie-Downs Front part # TLD2141 and rear part # TLR3510. These are designed for the steps under the cab and are designed specifically for your 2019 Ram.
    view full answer...
  • Truck-Bed Camper Troubleshooting For Tie-Down / Step Space Issue
    The TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear Item # TLR3510 is competing for the same space as the step so unfortunately there isn't a work around for this tie down. Instead you could replace the steps that bolt onto the wall of the camper like the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 3 Steps - 375lbs - Black Bracket Item # TLA7833. There are a few different options depending on the entry height of your camper which you can see in the chart I've attached....
    view full answer...
    Image 1 for
  • Torklift Truck Camper Tie-Downs For My 2019 Ram 3500 4X4 Diesel
    Your 2019 Ram 3500 4X4 diesel with the 8' bed and factory running boards under the cab. You have two options, depending on your vehicle's options. If you have the 8' bed with a fixed board under your cab with factory installed hitch, you will need the following items. TorkLift Talon Custom Frame-Mounted Camper Tie-Downs - Aluminum - Front, part # TL94FR TorkLift Talon Custom Frame-Mounted Camper Tie-Downs - Aluminum - Rear, part # TL34FR If you have the 8' bed with a factory electric...
    view full answer...
  • Camper Tie Downs and Torklift 30k Hitch that Fits 2022 Ram 3500 Dually
    The correct Torklift Camper Tie Downs for your 2022 Ram 3500 would be the part # TLD2141 and # TLR3510 which is also correct for use with the Torklift 30k hitch that fits your truck part # TLD1111-30. Since you have a dually you will also need to measure your camper to determine if you need the part # TLA7004 as well. Measure from front of camper slide in point to rear anchor point; kit is needed if less than 90 inches.
    view full answer...
  • Torklift Truck Bed Camper Tie-Downs for 2022 Ram 2500 Crew Cab Long Bed
    For the front tie-down, you'd use the Torklift # TLD2140. The rear tie-down will depend on whether you have the factory hitch or a TorkLift Super Magnum hitch installed. If you have the factory hitch, use # TLD3113 for the rear, or if you have the TorkLift Super Hitch Magnum, use # TLR3510. There are a couple of fit caveats: • Product does not fit vehicles with aftermarket Mopar rear-mounted kick out steps that are mounted under the bumper. • On dually trucks, the rear camper anchor...
    view full answer...
  • torklift component questions
    I have a couple of suggestions for you but you are really doing good on your kit so far. The TorkLift SuperHitch Magnum Trailer Hitch Receiver part # TLD1111-30 is what you want for the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear part # TLR3510 and the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front part # TLD2141 are a confirmed fit so to this point you are golden. For the suspension upgrades what you have will work. Using the TorkLift StableLoad Suspension Upgrade w...
    view full answer...
  • Parts Needed to Tow and Use Camper For 2019 Ram 3500 Mega Cab Short Bed With Factory Hitch
    Okay, so there's a lot to get to here, starting with the fact that since you need an extension, you will also need to add a TorkLift hitch and weight distribution system. The reason for that is, standard extenders don't have the capacity needed for you to tow, but you can do this if you add the TorkLift hitch and extenders. The only thing I can't tell you is the length you need as that's something you'll have to measure for. But there are a variety of lengths available. For your 2019 Ram...
    view full answer...
  • Solution for 36 Inch Hitch Extension on 2020 Ram 3500 With Arctic Fox 992 Camper
    The only other extension that will meet your 36" requirement is the Titan Hitch Box Extension for 2-1/2" Trailer Hitches, 41" - 48" Long # RP45018. This extension would have a maximum gross trailer weight of 7,500 lbs/750 lbs of tongue weight at 41" with weight distribution. Also, this does not have lateral-support safety chains like the TorkLift does. When you use a really long extension like the # TLE1536 there is a lot of additional force. This is why it seems like overkill to use this...
    view full answer...

Do you have a question about this Camper Tie-Down?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate camper tie-down information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jameson C
Expert Research:
Jameson C
Employee Jacob T
Video Edited:
Jacob T
Employee Kristina F
Written by:
Kristina F
Employee Michael B
Installed by:
Michael B
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-636-306-4830