bing tracking image
  1. Trailer Leaf Spring Suspension
  2. TruRyde
  3. Spring Seats
  4. Axle Mounting Hardware
  5. Round Axle - 1-3/4 Inch
Spring Seat for Typical 2,000-lb, Round Trailer Axles with 1-3/4" Diameter - Qty 1

Spring Seat for Typical 2,000-lb, Round Trailer Axles with 1-3/4" Diameter - Qty 1

Item # TRSS175
lowest price pledge
Our Price: $11.75
Trailer Leaf Spring Suspension
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.34 lbs
Quantity: 
In Stock
TruRyde Round Axle - 1-3/4 Inch Trailer Leaf Spring Suspension - TRSS175
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
The spring seat is a necessary component of your trailer's suspension system. When mounted with 1-3/4" wide leaf springs, it adds extra support and provides proper positioning for the axle. Lowest Prices for the best trailer leaf spring suspension from TruRyde. Spring Seat for Typical 2,000-lb, Round Trailer Axles with 1-3/4" Diameter - Qty 1 part number TRSS175 can be ordered online at etrailer.com or call 1-833-496-1390 for expert service.
  • All Info
  • Reviews (89)
  • Q & A (0)
  • Videos (1)
  • Photos
  • Why etrailer?

TruRyde Trailer Leaf Spring Suspension - TRSS175

  • Spring Seats
  • Axle Mounting Hardware
  • Round Axle - 1-3/4 Inch
  • TruRyde

The spring seat is a necessary component of your trailer's suspension system. When mounted with 1-3/4" wide leaf springs, it adds extra support and provides proper positioning for the axle.


Features:

  • Welds onto round, 1-3/4" diameter axle (typical 2,000-lb axle)
  • Works with 1-3/4" wide spring
    • Cutout on flat side of seat surrounds raised knob on leaf spring to prevent turning or shifting
  • Provides extra support and secure positioning for trailer axle
  • Quantity: 1
    • Please note: 2 spring seats are required for each axle


Dimensions

SS-175 TruRyde Spring Seat - 1-3/4" Round Axle

Replaces 3-49 Spring Seat - 1-3/4" Round Axle





Video of Spring Seat for Typical 2,000-lb, Round Trailer Axles with 1-3/4" Diameter - Qty 1

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for TruRyde Trailer Suspension TRSS175 Review

Today we're going to be taking a look at a spring seat for typical 2,000 pound, round trailer axles, with a 1-3/4 inch diameter. The spring seat is a necessary component of your trailer's suspension system. When mounted with a 1-3/4 inch wide leaf spring, it adds extra support and provides proper positioning for the axle. This unit's made from a durable steel construction. It welds on to a round 1-3/4 inch diameter axle, which is a typical 2,000 axle. It sits on top of a 1-3/4 inch wide spring. The cut out on the flat side of the seat surrounds the raised knob on the leaf spring to prevent turning or shifting.

It's going to provide extra support and secure positioning for the trailer axle. Please note that two spring seats are required for each axle. A few measurements to go over with you real quick. Start with the overall length, measuring edge to edge. It's going to measure about 2-1/4 of an inch long. Overall width, measures about 1-7/8 of an inch.

The height, is just shy of 1 inch, about 15/16 of an inch tall. Then this opening, right here, the rounded point, at the widest spot, that's going to give us an opening measurement of really close to an 1-1/2, maybe 1-7/16 of an inch, right in that area. That's going to do it for today's look at the spring seat for typical 2,000 pound, round trailer axles, with a 1-3/4 inch diameter.


Customer Reviews

Spring Seat for Typical 2,000-lb, Round Trailer Axles with 1-3/4" Diameter - Qty 1 - TRSS175

Average Customer Rating:  4.8 out of 5 stars   (89 Customer Reviews)

The spring seat is a necessary component of your trailer's suspension system. When mounted with 1-3/4" wide leaf springs, it adds extra support and provides proper positioning for the axle.

by:

I havent really gotten a chance to use the trailer much since my purchase of the leaf springs. But they went on perfect and the stance is perfect. With a weight load , they should be just right.




by:

These brackets used in conjunction with the new u-bolt kit made switching my trailer axle from being above spring to under spring.
This has raised the trailer about 3 inches in height from stock. I have a new set of wheel and tires coming and this should take care of the slight slope as seen in the picture.
After installing everything, I took the trailer for a test drive and it tracked nicely and behaved very good on the road. No problems.




by:

I was adding some supports to a trailer deck for a friend and noticed the spring seats were rusted away, found the parts quickly on etrailer shipping was fast and the trailer is ready to get back on the road.

The spring seats and u bolts kit were very reasonably priced and do the job they are supposed to do.




by:

Excellent customer service as always. These guys and gals have all the right answers when I hit a few snags on my Tow Dolly and boat trailer repairs. Thanks




by:

so far so good, just did a shake down test, all good. The trailer went straight and true. Now just waiting on my other order to come in so I can put some weight on the truck and trailer for the real test.




by:

Exact replacement




by:

Highest quality. These are stout!




by:

good and strong




by:

Plus:
Good products for a super low
price. Accomplished the goal of bringing life back to a dead trailer. The leaf springs ride much better than the stock rubber torsion axle. The new hubs and bearings roll much easier than the worn out ones they replaced.

Minus:
A little disappointed in the spring bushing. It seemed like cheap plastic and was quite a bit larger than the bolt so it fit loosely. This was the only real negative I have about the purchased, and that's pretty minor.

Tips for etrailer:
Providing a height of the spring would make spring selection easier. In our case we were starting with scratch for mounting springs, no preexisting mounting hardware. Knowing the height of the spring from mount to axle would have been helpful in selecting a spring for the proper ride height. In a snowmobile trailer application an inch or two in height makes a bit difference in approach angle when loading a sled. This was about the only measurement not listed for springs so we guessed, and it came out well for us in the end.




by:

I purchased a number of products from etrailer and I am very pleased with them all. The shipper lost my axle. When I contacted etrailer customer service, they handled my problem quickly and I had a replacement axle in a couple days. Well done!

The products were all of high quality and the assemble was much easier as a result. I have attached a few pictures of the build for those interested.

Thanks etrailer for your great products and service!!


Comments
The trailer has performed better than my expectations. The products I purchased are all performing perfectly. When I build my next trailer, I will get all my assemble products from etrailer.com
Jim D - 01/02/2021


by:

Good product, looks about best quality made, functional. I foresee no problems using thes3 downrange.




by:

Bought these along with the UBolt kit for a Coleman popup camper to do an "axle flip" or move the axle from above the springs to below the springs giving 3-4 inches of additional clearance. My popup has a 1.75" axle and Dexter doesn't make prefab kits for that axle. Spring seats had to be welded to my axle, but beyond that, the axle flip worked OUTSTANDING! If you go off road at all with your camper, I can't recommend enough doing this. Should have done it years ago! Spring seats worked great!


Comments
Hey John, Im about to do the same thing to my 89 Coleman pop up. What u bolts did you use and what other items did you need? Just weld these opposite of the old ones and replace springs with u bolt?
-- comment by: DC - 06/02/2015
I ordered a couple of the 1- 3/4 U bolts from eTrailer as well. Yes, weld up the perches opposite the old ones but be sure to take some time to make sure theyre aligned both vertically and horizontally. I used a level to compare the top plane of the new perches with the bottom plane of the old ones with the axle upside down and clamped it in place before welding.
-- comment by: John H - 06/05/2015



by:

These worked perfectly to give me the lift I was looking for on my trailer. I’ve dragged the trailer all around Florida and to Texas and back with no issues. Wouldn’t think twice to buy again




by:

Thanks! Arrived early.




by:

Quick delivery




by:

make sure you order two if doing a spring over conversion. The ubolts come as a kit the seat (TRSS175) does not. ORDER TWO!!!




by:

Seems like quality metal. Was easy to get them welded on. Confirmed great to my 2000 lbs axle, no issues.


Comments
Everything is still great, no issues.
Shawn - 04/14/2021


by:

Needed "spring over" conversion on Teardrop type camper. Dexter axle required these to do it right. Perfect fit. Time from order to shipping was longer than anticipated. So parts, availability and knowledge are great, delivery time disappointing.


Comments
Product is great. No problems whatsoever. I heartily recommend etrailer and will use them for my next camper buildconversion.
Thom K - 07/07/2015


by:

Very satisfied with the quality of the part..my local welder had no difficulty
Mounting on axle. Holds up well after a year




by:

Works as advertised. I had a local welder put these onto the axle for me. I ended up needing them since my harbor freight trailer had a metric dimensional spacing between the mounts and the axle I bought had a standard inches dimensional spacing. They were off by less than 1 inch, but I couldn't make it fit unless I welded on these brackets at the correct location for the trailer.




by:

I have a Coleman Tent trailer and our favorite camp sites are off road. I decided to flip the axle to gain some off road clearances and level the trailer being towed by either my Truck or Jeep which have lift kits. I purchased these parts, installed and I am stoked! Great product and was easy to install. Parts were of great quality and shipped quickly. I will most definitely trust etrailer and highly recommend them. Thanks etrailer!!




by:

Perfect fit, no vibration, durable. Held up to off road use in west Texas scrub!




by:

Thank you for exactly what I needed at a fair price.
Shipped to me in a timely manner so I was able to the job I was working on.
Your website was very user friendly as well.
keep up the good work.
Jim J , Wisconsin


Comments
Thanks for checking All working as needed
Jim J - 08/05/2016


by:

I had an 81 popup trailer i wanted to do an axle flip on. Found the parts here under 30 bux. Exact hardware as original and big beefy steel spring perches for welding to the axle. Highly recommend as im highly satisfied.




by:

Did a spring over conversion on a pop-up camper, with larger wheels. Easy and gives me a lot more ground clearance. Had to slam through a hundred yards of deep, greasy clay mud out by Chaco Canyon in NM after a big rain. All went well.



25
89
Show More Reviews

See what our Experts say about this TruRyde Trailer Leaf Spring Suspension



  • Are Axles Available Without The Spring Seats Installed
    The axles we offer have the spring seats already installed and they are placed at one of 3 lengths, 48 inches, 58 inches and 74 inches apart. You would have to install new spring seats if you need the distance to be 53 inches. I have attached a link to the spring seats we offer. You will want the spring seats to be welded in place by a qualified welder.
    view full answer...
  • Do Trailer Axle Spring Centers Have to Match Perfectly
    If the spring seat dimension on the axle does not match up the suspension won't work properly as it will be bound up instead of able to move freely. This also would cause premature failure of the components as well so I'd have to recommend you reinstall them in a better location.
    view full answer...
  • Can New Spring Seat be Installed on Axle if Current Seats Don't Line Up
    Yes you can weld new spring seats to your axle so that it matches your trailer frame if you ordered the wrong size. For 1-3/4 inch spring seats you would want the part # TRSS175 that you referenced.
    view full answer...
  • Type of Metal Spring Seat # TRSS175 is Made Of for Welding
    The spring seat part # TRSS175 that you referenced is made of steel like what your axle is made of so it would not be an issue for you to weld at all.
    view full answer...
  • Can Spring Seats On Trailer Axle Be Moved To Match Trailer Frame?
    They sure can! What you will need to do is replace the spring seats that are currently welded on the axle in question, and have a qualified welder weld them in the correct location to match your trailer. Now the correct spring seats will be dependent on the diameter of your axle tube. The most common sizes are the 1-3/4" # TRSS175 which is common for 2000lb axles, the 2-3/8" # TRSS238 which is common for 3500lb axles, or the 3" # TRSS300 which are common for 5200-7000lb axles. I included...
    view full answer...
  • How to Correct Trailer Whose Spring Hangers Do Not Line Up With Spring Seats
    You will need to have the spring seats removed to have them or new spring seats welded to your axle at the correct locations to match your trailer's hanger spacing. For a 3-inch round axle rated between 5200- and 7200-lbs use part # TRSS300; for a 2-3/8-inch diameter 3500-lb axle use part # TRSS238; for a 1-3/4-inch diameter 2000-lb round axle use part # TRSS175. If you cannot re-position the spring seats to match the hanger spacing then you can have a qualified welder install new material...
    view full answer...
  • Over Under Kit Recommendation for 1-3/4 inch Axles
    I wish we had something we could offer you, but none of the spring seats we offer are designed to fit a 1.9 inch diameter axle. The closest we have is the 1.75 inch spring seat like part # TRSS175 which wouldn't work unless you happened to incorrectly measure your axle diameter and you do have 1-3/4 inch axles. The rest of the parts you would need would come in the kit part # APUBR-10.
    view full answer...
  • Adding Lift To 2003 Jayco Single Axle Tent Trailer
    I spoke with my contact at Jayco about your 2003 single axle trailer. There is no lift kit available but we may have an option for you. If your 1-3/4 inch axle is round and you have underslung leaf springs, I recommend installing a new spring seat on top of the axle, like the Spring Seat for Typical 2000-lb, Round Trailer Axles, part # TRSS175. Simply flipping the axle is not an option because axles are made with a slight arc so that they can handle the load on the trailer. When placed...
    view full answer...
    Image 1 for
  • Can Trailer Leaf Springs be Moved from Below the Axle to the Top of the Axle
    Some trailers have the leaf spring stack above the axle and some have it underneath. You can move the stack to the top of the axle but you will have to weld on new spring seats to the top of the axle. Use # TRSS175 for a 1-3/4 inch round axle. It will raise the height of the trailer some but you need to be aware that it also raises the center of gravity. That makes the trailer more susceptible to sway.
    view full answer...
  • How to Make Over-Under Conversion Kit for 2K 1-3/4" Axle on 5x8 Utility Trailer
    I'm pretty confident you have a 1-3/4" round tube axle on your Carry On 5x8 trailer. Having a 2" axle is uncommon and is typically only found with square tube axles, which you don't have on your trailer. While there isn't a specific over-under conversion kit for a 1-3/4" axle, you can use 2 of the spring seat # TRSS175 and weld them on either end of your axle, and then use the U-Bolt kit part # APUBR-10 to finish out your own conversion kit! Please note that you need to have a qualified...
    view full answer...
  • Parts Required to do Over/Under Conversion on 1-3/4 Axle on Tractor Supply Trailer
    From what I was able to determine the Tractor Supply trailer you have likely has a 2000-lbs axle on it, which has a 1-3/4" diameter axle. There isn't a specific over/under conversion kit for that size axle but you can use 2 of the spring seat # TRSS175 and weld them on either end of your axle and then use the # APUBR-10 u-bolts you were looking at to complete the process. It should be noted that you need to have a qualified welder perform the installation of the spring seats.
    view full answer...
  • Axle Flip Kit to Lower Trailer with 2,000 Pound Axle
    We recommend having at least 4 inches of clearance between the top of the tire tread and your fender or trailer floor to account for suspension travel. If the leaf springs are currently over the axle on your trailer and you want to move them below it to lower the trailer then you will just need a U-bolt kit and new spring seats. You will want to verify this but most likely your 2,000 pound round axle features a 1-3/4 inch diameter. For this the U-Bolt Kit # APUBR-10 and the TruRyde Spring...
    view full answer...
  • Correct Spring Seat and U-Bolt Kit for my 1-3/4" Round 2,000 lb. Axle
    The Spring Seat for Typical 2,000-lb, Round Trailer Axles with 1-3/4" Diameter part # TRSS175 are confirmed to work with the U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles part # APUBR-10. The U-bolts are always slightly wider at the mouth than at the bend and they all fit together really well.
    view full answer...
  • How to Make a Trailer Axle Over Under Kit for 1-3/4 inch Round Axles
    All you would need for an over-under kit for a 1-3/4 inch round axle would be the U-bolt kit part # APUBR-10 and the spring seat part # TRSS175. You would need two of the spring seats.
    view full answer...
  • Changed Trailer Deck From Steel to Wood Now Tires Rub Fenders When Towing A Load
    We carry over-under conversion kits that fit both a 2-3/8 and 3 inch axles. However, we do not offer a kit that will fit a 2,000 lbs axle, but we can put together a conversion kit for you that will work with your axle. You will need U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles, # APUBR-10 and 2 of Spring Seat, # TRSS175, for 2,000 lbs with 1-3/4 inch diameter. You will place a spring seat on the top of the axle to provide a place for your leaf spring to sit. The new spring seat...
    view full answer...
  • Does Over Under Kit for 1-3/4 inch Axle Require Welding
    All you would need for an over-under kit for a 1-3/4 inch round axle would be the U-bolt kit part # APUBR-10 and the spring seat part # TRSS175 that you referenced. You would need two of the spring seats. You will need to weld the spring seats into place.
    view full answer...
  • Axle Flip Kit for a 1,000 Lb to 2,000 Lb Trailer Axle 1-3/4 Inch Diameter
    I have a solution that will allow you to flip your axle but there is not an all-inclusive kit for your axle size so we will need to piece together one. I assume you have a 1-3/4" diameter axle (1,000 lb - 2,000 lb) so that means you will need the U-Bolt Kit part # APUBR-10 and the Spring Seat part # TRSS175 (2). These u-bolts are 4-1/4" which is the longest we have for this width. However, I would highly doubt that you will require a 6" long u-bolt as most leaf springs are only 3/8" thick....
    view full answer...
  • Parts Needed to Flip Axle on a Pop up Camper
    I have exactly what you need, but it will have to come in the form of a couple parts pieced together because an over-under conversion kit or "axle flip kit" as some people call it isn't available for the smaller 1-3/4 inch round axles. To move your leaf springs above your axles, you will want the following parts: Qty 2 - Spring Seats # TRSS175 Qty 1 - U-Bolt Kit # APUBR-10 The spring seats will be welded to the opposite side of the axle as the current spring seats. You may not need the...
    view full answer...
  • Parts Needed to Flip 2,000 Pound Axle With Slipper Springs
    Technically the over-under conversion kit can be used with slipper springs if the spring seats are fully welded to the trailer axle and you would have to use a u-bolt plate that fits the springs. Since you have a 2,000 lb axle this doesn't matter since there is not a kit that fits a 1-3/4" diameter axle like the one you have. You can do the same thing with the U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4-1/4" Long U-Bolts # APUBR-10 assuming you have 1-3/4" slipper springs....
    view full answer...
  • Parts Needed To Flip A 1-3/4 Inch Axle On A 1990 Coleman Pop-Up Camper
    We don't have an over under kit for your application, but, you can make one. U-Bolt Plate - 1-3/4" Diameter Trailer Axle - 1-3/4" Wide Spring - 3/8" Bolts # TRTP175173 Spring seats welded to the axle like the Spring Seat for Typical 2,000-lb, Round Trailer Axles with 1-3/4" Diameter # TRSS175 For U-bolts we have the Replacement U-Bolt with Nuts for 1-3/4" Round Trailer Axles - 3/8" Diameter # 175643 but you will most likely need to find longer u-bolts with the other dimensions being...
    view full answer...
  • How to Convert 2K etrailer Trailer Axle with Idler Hubs to Overslung Configuration
    The Trailer Axle with Idler Hubs # e82GR only comes in the underslung configuration. In order to place the springs on top of the axle you'll actually need to have a professional welder install the spring seat # TRSS175 on top of the axle as Dexter Axle only makes their conversion kit for 2-3/8" and 3" diameter axles. If you're wanting the axle to come with the spring seats welded on top of the axle then you'll need to reach out to your local trailer shop or dealer to see if they'd be able...
    view full answer...
  • Adapting Axle so Spring Seats are On Top Of Axle Tube
    A 2,000 lb axle like the one you mentioned could easily be converted for a top mounted leaf spring. All you'd need to do is weld on a new spring seat # TRSS175 on top of the axle tube directly opposite of the existing ones. Simply flipping the axle over so the existing seats are on the top won't work, as the bow in the axle would have the camber of the wheels wrong if you did it that way.
    view full answer...
  • Conversion Kit Availability For 1-3/4 Inch Axle On Coleman Pop Up Camper
    We have two conversion kits we offer and they will work on either a 2-3/8 inch or 3 inch round axle only. They would not work on an axle that measures 1-3/4 inches. The spring seat we offer for a 1-3/4 inch axle is part # TRSS175. This is designed to be used with a typical 2,000 lb round axle.
    view full answer...
  • Trailer Spring Kit # 2-1020 Recommendation for an Old Boat Trailer Converted to a ATV Trailer
    It sounds like you may have a vehicle leaf spring on your old boat trailer as we do not carry any leaf springs that are that length. The leaf spring that would closely match the axle capacity of your trailer would be # SP-169275. You are going to have to relocate your hangers as they are too far apart for the leaf springs I recommended. For a hanger kit I would recommend a Single-Axle Trailer Hanger Kit for Double-Eye Springs # APS4. You will want to install the hangers 20 inches apart...
    view full answer...


< Previous
123. . .4



Do you have a question about this Trailer Leaf Spring Suspension?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer leaf spring suspension for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer leaf spring suspension information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Cole B
Installed by:
Cole B
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.