bing tracking image
  1. Trailer Leaf Spring Suspension
  2. TruRyde
  3. Spring Seats
  4. Axle Mounting Hardware
  5. Round Axle - 3 Inch
Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter

Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter

Item # TRSS300
lowest price pledge
Retail:$10.00
Our Price: $8.59
You Save: 14%
Trailer Leaf Spring Suspension
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.68 lbs
Quantity: 
In Stock
TRSS300 - Round Axle - 3 Inch TruRyde Axle Mounting Hardware
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
The spring seat is a necessary component of your trailer's suspension system. When mounted with 1-3/4" or 2" wide leaf springs, it adds extra support and provides proper positioning for the axle. Lowest Prices for the best trailer leaf spring suspension from TruRyde. Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter part number TRSS300 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (108)
  • Q & A (0)
  • Videos (1)
  • Photos
  • Why etrailer?

TruRyde Trailer Leaf Spring Suspension - TRSS300

  • Spring Seats
  • Axle Mounting Hardware
  • Round Axle - 3 Inch
  • TruRyde

The spring seat is a necessary component of your trailer's suspension system. When mounted with 1-3/4" or 2" wide leaf springs, it adds extra support and provides proper positioning for the axle.


Features:

  • Welds onto round, 3" diameter axle (typical 5,200-lb to 7,200-lb axle)
  • Works with 1-3/4" or 2" wide spring
    • Cutout on flat side of seat surrounds raised knob on leaf spring to prevent turning or shifting
  • Provides extra support and secure positioning for trailer axle
    • Please note: 2 spring seats are required for each axle


Dimensions

SS-300 TruRyde Spring Seat - 3" Round Axle

Replaces 3-42 Spring Seat - 3" Round Axle





Video of Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for TruRyde Trailer Suspension TRSS300 Review


Customer Reviews

Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter - TRSS300

Average Customer Rating:  4.8 out of 5 stars   (108 Customer Reviews)

The spring seat is a necessary component of your trailer's suspension system. When mounted with 1-3/4" or 2" wide leaf springs, it adds extra support and provides proper positioning for the axle.

by:

Products were as advertised, worked well and installation went as planned. Accomplished task - moved under hung leaf springs to over axle (tandem drop) on older horse trailer, to regain bumper clearance - new truck sits higher than old, also allowed extended goose neck to eliminate tail gate damage, while leveling trailer (nose no longer stuck in air). I would purchase again without hesitation.


Comments
Works as expected, Im happy with the product and results- would purchase again if I have a trailer in the future that needs a lift.
James K - 07/29/2021


by:

Worked well for the 6000# axle that I used this on. Fit the existing Lippert springs.




by:

Perfect fit as described! Uploaded picture for proof. So far i couldent be happier with etrailer.com, great prices and fast shiping. I haven't had an issue with anything so i have no opinion as far as customer service goes. I would definitely recommend to a friend.




by:

There was a mix up between original estimated delivery before and after purchase. Sent an email regarding the matter, the team responded quickly and got my products out the next day.




by:

The suspension parts were exactly what I needed. Always a pleasure to do business with etrailer.




by:

They fit and worked as planned.




by:

Purchased 4 of them welded them on my axles and they are still performing excellently.




by:

Just as advertised




by:

Exactly as advertised.




by:

Missing 1 when shipped.


Comments
I will definitely have our customer service team reach out to you to have the missing spring seat sent out.
-- Etrailer Expert Jenny N - 06/09/2022


by:

I replaced my leaf springs, drums, brakes and added the Dexter E-Z Suspension kit to my Keystone Cougar Fifth Wheel trailer last year. This was my first time working with etrailer and I can’t say enough about how well it all went from the ordering to the install.
Tammie P did a amazing job with knowing what parts would work best on my trailer. Tammie also gave me updates on my deliveries that I appreciated. I had a trip planned short after I received my parts. So having someone at their end checking on arrival dates helped. In the future I will definitely use etrailer for all my trailer needs. Thanks again for all the help! Great Team....




by:

Just what I needed




by:

Great. Thanks.




by:

Great service and delivery,thank you i look foward to doing more business




by:

Just right




by:

Just as expected. I’m using them to make saddles for my hydraulic jacks. These should prevent any point loading when jacking under the axle




by:

Great product and great company to work with. I ordered regular shipping and they upgraded me to 3 day shipping an no charge. Very satisfied with the product and company.




by:

I installed a set of these spring mount brackets one year ago and I am glad I purchased it from etrailer. I purchased it on line just to make sure it would work on the 1964 axle that I was going to weld it to in order to complete the install of a new set of springs that I also purchased from etrailer. Everything fit perfectly and etrailer is now my go to for all my trailer needs. George J. was very professional and knew the product(s) would work. And it did!

Thank you George and etrailer.




by:

Worked well, had a professional weld them on.




by:

Fit perfect and was exactly what I needed. Thank you




by:

The seats were just what I needed Last year I moved the trailer
springs from the bottom of the axel to the top when I did I had
to turn the axel end to end it caused the trailer to wear tires out .
brakes to wear out .I am turning axel back and welding new seats
leaving hubs running right. Back to factory only on top of axel.

Thank You




by:

l am very satisfied with the product.




by:

I am using two second hand axles for my trailer and the spring seats were in the wrong place. They were hard to find because I didn't know what to call them, but I was really grateful they were available. They will complete the installation of the axles and are sturdy and cut perfectly.




by:

I recently started an new business and have purchased multiple products from etrailer.com over the last couple of months. I have been very happy with the ease of ordering and product quality. I initially ordered from several suppliers and have now starter ordering from etrailer.com only. They have the best pricing on the parts I purchase and am very happy with them!




by:

Very happy with product and seller. Product worked exactly as it was designed to work.



25
108
Show More Reviews

See what our Experts say about this TruRyde Trailer Leaf Spring Suspension



  • How to Pick Out Spring Seats for an Axle that is Getting Moved Flipped
    To determine the correct spring seat will depend on the axle diameter and capacity. For example the Spring Seat part # TRSS300 that you referenced is designed for 3 inch axles with 5,200-7,000 lb capacities. If you need a different spring seat check out the link I attached that will show you all of the spring seats we offer.
    view full answer...
  • Leaf Spring Seats for a 5,200 to 7,000 Pound Trailer Axle
    A 5,200 to 7,000 pound trailer axle will be 3 inches in diameter if it is a round axle. For that you can use spring seat # TRSS300. It is sold in quantities of 1.
    view full answer...
  • What Are The Dimensions Of The Axle Spring Seat for 3 Inch Round Trailer Axles
    The Dimensions of the Axle Spring Seat 3 inch Round, item # TRSS300, are 1-7/8 inches wide by 4 inches long. The radius, where the 3 inch axle sits, is on center and the 1/2 inch hole is centered in the part.
    view full answer...
  • What is a Trailer Spring Seat
    A leaf spring seat, or perch as it sometimes called, is the mount that is welded to the axle where the trailer's leaf springs sit on top of or below the axle. An example of one is part # TRSS300. I've attached a picture that points out the spring seat on a trailer axle.
    view full answer...
    Image 1 for
  • Available 94-Inch Long Axles and Matching 3-Inch Diameter Spring Seats
    We do offer 7K-rated beam axles in the 94-inch hub-face-to-hub-face length you mention, shown on the linked page, and these have their spring seats spaced apart on center at either a 78-1/4-inch or 79-inch dimension. Since we do not produce these axles ourselves we cannot make one for you with different spacing but you can have a local trailer/welding shop install new spring seats at the specific 70-inch spacing you need. Our spring seat to fit this 3-inch axle diameter, part # TRSS300,...
    view full answer...
  • Available 89-Inch Trailer Axles and Spring Seat Spacing
    All of our axles that have an 89-inch hub face spacing (see diagram, please) also have a spring center spacing of 74-inches. None of our axles has a 76-inch spring center spacing; the nearest ones are either 74 or 78-1/4-inches apart. But we can still help you with a new axle. You can refer to the linked page to see all of our axles. First select the weight rating of the axle you need. Our 89-inch axles such as # 8327830 are rated for up to 6K. Since you need spring seats in alternate...
    view full answer...
    Image 1 for
  • Can Axle Be Ordered with Loose Spring Seat Perches?
    The Dexter Trailer Axle Beam with E-Z Lube Spindles - 89" Long - 6,000 lbs # 8327830 comes with the spring seats (perches) welded in place and they cannot be ordered without them attached. However, you can add spring seats if you need them in a location other than the 74 inches on center. You would use the Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter # TRSS300 and you'd need to weld them in place and then prime and paint them for corrosion resistance....
    view full answer...
    Image 1 for Image 2 for
  • Can the Dexter Trailer Axle Beam Part # 8327830 Be Used with a Top Mounted Leaf Spring
    In order to use the Dexter Trailer Axle Beam part # 8327830 with leaf springs mounted on top you would need to weld on new spring seats with part # TRSS300. The reason for this is that the existing spring seats are installed for use with a leaf spring mounted under the axle. Most think you can simply rotate the axle to move the spring seats on top but this cannot be done as the axle has a slight bend to help dissipate the weight when loaded.
    view full answer...
  • Can Spring Seats on Dexter Replacement 5200LB Axle Be Installed Atop the Axle Rather Than Underneath
    You certainly can install a replacement 5.2K axle like # 6340624 by using new spring seats atop the axle. I'd recommend using part # TRSS300 but it's recommended that they at least be tacked into place so they stay put.
    view full answer...
  • Does Dexter 6,000 Pound Axle Come with Spring Seats Welded on Top of Axle
    We do carry spring seats that can be welded on the top of the # 7461121 axle but it doesn't come that way. The spring seats are part # TRSS300.
    view full answer...
  • Availability of Dexter Axle # 8327816 with Spring Seats Welded On Other Side
    We don't offer them with the perches mounted on the other side but if you wanted to you could have a set of welded to the opposite side with # TRSS300 pretty easily.
    view full answer...
  • Replacement 5,200 Axle for 2015 Keystone Cougar Trailer
    The best option we have for a trailer with damaged spindle threads is a new axle beam as there isn't any sort of repair kit, the Dexter Trailer Axle Beam part # 8327816 matches what you need although you'd have to move the spring seats part # TRSS300 in a few inches to match what you have now.
    view full answer...
    Image 1 for
  • Replacing Lippert 5,200 lb Axle with Dexter 5,200 lb Axle 86.5 Inches Hub Face to Hub Face
    The Lippert 5,200 lb axle you have has a hub face to hub face of 86.5 inches which is identical to the Dexter # 8327816 you referenced, however the 68.5 inch spring seats of your Lippert axle are not identical to the 71.5 inch spring centers of the Dexter axle. They do use the same spindles so the bearings and grease seal will all match. You would simply need to weld spring seats onto the axle at the 68.5 inch on center locations using # TRSS300.
    view full answer...
  • Could Spring Seat of Dexter Axle be Moved to Fit New Application
    The Dexter axle part # 8327820 could only fit your trailer if you installed new spring seats on it since it has spring seat centers at 74 inches and your trailer has them at 71.5. For new spring seats you'd want the # TRSS300 welded at the correct distance. Aside from that the overall length and capacity would be fine for your trailer.
    view full answer...
    Image 1 for
  • Replacement 5,200 lb Axle That is 86-1/2 Inches From Hub Face to Hub Face
    While we have an option for you, there isn't a 5,200 lb axle we offer that measures both 86-1/2 inches hub face to hub face and 68-1/2 inches spring center to spring center. So what you can do is get an axle with an 86-1/2 inch hub face measurement and weld on new spring seats at the 68-1/2 inch measurement you need. The correct parts for that are the following: - Dexter Trailer Axle Beam with E-Z Lube Spindles - 86-1/2" Long - 5,200 lbs # 8327816 - Spring Seat for Typical 5,200-lb...
    view full answer...
  • Can 5,200 lb Axles be Replaced With 7,000 lb Axles
    I appreciate the info, and while we can get you a higher capacity axle, a 7,000 lb axle can't replace a 5,200 lb axle because the hub-face to hub-face measurement on 7k axles is too long, coming in at 94 inches at the least. But what we can do instead is get you a 6,000 lb axle with the same hub-face to hub-face measurement that will also allow you to use the same hub and drum. You will simply need to have new spring seats welded on at your current 68-1/2 inch measurement; what you can...
    view full answer...
  • Replacement for 95 Inch Long 7,000 Pound Dexter Axle
    For a replacement axle I recommend the Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 95" Long - 7,000 lbs # 8327860. I'm assuming by "4 inch" you meant a 4" drop since 7k axles have a diameter of 3". This axle will be the same as your current axle with the exception of the spring-center-to-spring-center length which is 79-1/4". The spring center measurement not matching up is fairly common but there is a solution. You will need to have the spring seats cut off of the axle...
    view full answer...
  • Replacement 95 Long 7,000 lbs Dexter Axle w/ 4 Drop Spindles
    I just heard back from Dexter and they gave me some information on your axle. I have a solution for you and it is very close to your specifications but you will need to have the spring seats moved. The Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 95" Long - 7,000 lbs item # 8327860 axle you were looking at is what Dexter recommended. There are no available axles with a 77" spring seat. These have a 79-1/4" spring seat and the replacements you will need are Item # TRSS300.
    view full answer...
  • Do You Carry a 96" Hub Face To Hub Face Axle?
    Currently a 95" hub face to hub face Axle # 8327860 is the widest we carry. This particular axle has a 79-1/4" spring seat measurement that can be moved by cutting off the seats and having new Seats # TRSS300 welded on. Depending on the age of your trailer and the manufacturer there may be a tag with the axle information that I can confirm the manufacturer dimensions and weight capacity to ensure you get the correct replacement.
    view full answer...
  • Trailer Axle With 95" Hub Face, 4" Drop Spindle and 78" Spring Centers
    The Dexter Trailer Axle Beam with 4" Drop # 8327860 has the 95" hub face to hub face measurement that you are needing. You would need to remove the spring seats from the factory and add 2 new Seats # TRSS300 to the axle in the 78" center position you are needing. This particular axle is rated for 7,000lbs. If you are needing a different weight capacity please let me know.
    view full answer...
  • Option For Drop Axle That Measures 95 Inches Hub Face to Hub Face
    We do have drop axles that measure 95 inches from hub face to hub face, though the spring centers are going to be a bit longer. What you can do though is simply weld on new spring centers at the exact spacing you need. You didn't mention the weight capacity of the axles you wanted, but there are options for a 3,500 lb and 7,000 lb axle: - 3,500 lbs: Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles # 7685269 - Spring Seat for Typical 3,500-lb, Round Trailer Axles with 2-3/8" Diameter...
    view full answer...
  • How to Correct Trailer Whose Spring Hangers Do Not Line Up With Spring Seats
    You will need to have the spring seats removed to have them or new spring seats welded to your axle at the correct locations to match your trailer's hanger spacing. For a 3-inch round axle rated between 5200- and 7200-lbs use part # TRSS300; for a 2-3/8-inch diameter 3500-lb axle use part # TRSS238; for a 1-3/4-inch diameter 2000-lb round axle use part # TRSS175. If you cannot re-position the spring seats to match the hanger spacing then you can have a qualified welder install new material...
    view full answer...
  • Can Spring Seats On Trailer Axle Be Moved To Match Trailer Frame?
    They sure can! What you will need to do is replace the spring seats that are currently welded on the axle in question, and have a qualified welder weld them in the correct location to match your trailer. Now the correct spring seats will be dependent on the diameter of your axle tube. The most common sizes are the 1-3/4" # TRSS175 which is common for 2000lb axles, the 2-3/8" # TRSS238 which is common for 3500lb axles, or the 3" # TRSS300 which are common for 5200-7000lb axles. I included...
    view full answer...
  • Recommended Spring Seat for a Square Axle Tube
    Correct, you will need to have a spring set installed on the axle tube to hold the leaf springs in place and prevent them from sliding back and forth. That said, although we do not have any spring seats specifically for a square tube axle you can use the Spring Seat part # TRSS300 by grinding the ends down and then welding it to the axle tube.
    view full answer...


< Previous
123. . .4



Do you have a question about this Trailer Leaf Spring Suspension?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer leaf spring suspension for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer leaf spring suspension information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Cole B
Installed by:
Cole B
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924