This pair of scissor jacks can be either bolted or welded to the frame of your trailer or RV. Worm-gear mechanisms won't slip. Oversize footplates help to eliminate sinking and tilting.
Features:
Specs:
Note: These jacks are designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of these jacks.
Average Customer Rating: 4.8 out of 5 stars (597 Customer Reviews)
This pair of scissor jacks can be either bolted or welded to the frame of your trailer or RV. Worm-gear mechanisms won't slip. Oversize footplates help to eliminate sinking and tilting.Very low quality. There reverse thread. And when you extend them the threaded rod ends up sticking out the hex side.
Purchased and received within four business days. I installed them on my 2015 Jayco fbds fifthwheel as an upgrade. I had to drill 2 new bolt holes on each side in order to secure each jack with 4 bolts. The Jacks I replaced were 24 inch, so these Jacks extend an inch or so when raised but not any further than the fender flares. Overall a quality product and easy to install.
Way better than the stock jacks on my 2022 Momentum 25g. Plug and play
Great product. Well built. Easy install. We have one touch automatic leveling system on our Grand Design 240RL fifth wheel. But still had movement inside the trailer. These scissor jacks did the trick. Very solid now.
I use these amidship to help the front and rear jacks. They add to the overall stability of our Sandstorm 5th wheel.
ubused the heck out of'em still in service,, great item..i really like e-trlr!!!!!!!
Recived my item quick worked great
I haven't had a chance to use them in a camping setup, but they were easy to install and in a couple of trial runs they work great. I was interested in these because they screw up/down from both ends of the jack. I believe this will improve the holding power of the jacks when deployed. My older jacks (which only had 1 screw point) would tend to back off during an extended camp stay.
Thomas F - 04/04/2021These are a great inexpensive method to have leveling And stability system on your trailer. Easy to install and works great.
RANDY B - 08/24/2021Excellent service no delays
It only took about five minutes to replace my front leveling jacks with these new bigger jacks. Awsome lift capability and strength.
Ray f - 06/15/2018These jacks are well built and have the extra height for uneven surfaces we were looking for. I find mounting this type of jack at a 45 degree angle to the frame is more stable than parallel or perpendicular. We used them all year and they are fine. My only comment to the maker is, something about the set-up of the threaded rod and 'nut' makes running them up and down take more force than should be needed, even before the base hits the ground and they pick up the weight of the trailer. They were that way out of the box. I use a battery-powered impact driver with a 3/4 socket to extend and retract, so no problem for me, but someone using the little hand crank supplied would build some muscles cranking them up and down by hand. I would purchase again if I needed replacements.
Very Poor quality. One of the jacks broke the second time I used them. The nut on the end of the screw that raises the jack broke free. I was only lifting one corner of a horse traier (no horses in the trailer).
The Trailer leveling blocks work fine, just as advertised.
An excellent quality scissors jack. I went with a 30 inch vice the 24 due to needing the extra lift in unlevel ground. They protrude about 4 inches on the sides but does what I wanted. I will replace the front ones sometime next spring using the 30 inch jacks also.
Still working great
Tim - 01/11/2022Not too impressed with the jack. It's built quite a bit lighter than I thought it would be. The side to side play (perpendicular to the "long" direction of the jack) is huge. With a bit of a lever arm the play is unacceptable. On top of that, on both jacks the center screw is far from being true. Both have a highly noticeable wobble. The nuts on the screw also came loose on both jacks after some usage.
The upside to this jack is you do get the 30 inches of stroke, though as flimsy as these things are built I'd be wary to test the 6500lb rated capacity.
Installed these on the rear of a nine month old 44 foot toy hauler. Why you ask? Well, I got tired of the error and fault codes associated with the electric leveling system.
These jacks are heavy duty and I like the 30 inch option since this will leave plenty of jack unopened and I suspect will deliver a steadier support.
Mounted in about thirty minutes and looks/works great.
Electronics are good when operates properly and without error, but there is something to be said about the old manual way.
Highly recommend.
Perfect for what I needed - heavier and more sturdy than the ones I had on my travel trailer. Shipped/received FAST
I am more than happy with the scissor jacks, very high quality and easy of shopping of the web site is great.
After a year, I found these jacks to be well made and functional. I camp in some unstable areas with a few Highs and Lows. The extra reach of these jacks is well worth the price. Of course, I have to maintain the screws with a little grease once a year. I fully recommend these jacks!
Recieved my new jacks a couple weeks ago. Install was a breeze. I am very happy with the operation and quality of these jacks.
I thought they were well worth the money. My only issue was I had to mount them perpendicular to the frame. I was hoping they could have been mounted on the frame work of the tongue. Since I had to mount them were I did they stick farther than I like, but they work great.
works as expected and as usual for these not for use to free tire from the ground. I liked the extended height of these. they Will help stabilize my new 34' camper. defiantly need to use a drill to extend or retract them. takes quite a few turns to raise or lower a couple inches.
Worked great shipped as promised
I added these jacks at the mid span of my camper (right at the axles). It made a huge difference in the stability of the parked camper. The prep uncles holes in the mounting plate made the install simple!
Do you have a question about this Camper Jack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.