bing tracking image
  1. RV Vents and Fans
  2. Ventline
  3. Roof Vent
  4. With 12V Fan
  5. Vent
  6. 14W x 14L Inch
Ventline Ventadome Roof Vent w/12V Fan and Wall Switch - Powered Lift - 14-1/4" - Smoke

Ventline Ventadome Roof Vent w/12V Fan and Wall Switch - Powered Lift - 14-1/4" - Smoke

Item # V2119-3-533
lowest price pledge
Our Price: $171.50
RV Vents and Fans
This item qualifies for Free Shipping
Shipping Weight: 4 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Videos

Need help with installation?
Locate installers near me
Product Expert Kathleen M

Is this right For you? Product Expert Kathleen M says:

Yes, if you:

  • Have a hard time keeping track of remotes and need a wall mounted switch that you can't lose
  • Are upgrading a vent or skylight to a fan and need all the wiring, switch, and garnish included
  • Like natural light coming in and adding a little warmth to your camper through the tinted lid

No, if you:

  • Camp in warm areas where air movement makes a big difference - a more powerful fan might keep you from having to turn on the AC
  • Stay in rainy places where you might not realize water is coming in your camper until it's too late
This roof vent's powered, 12-volt fan and dome lift provide the ultimate in convenience for ventilating motor homes and enclosed trailers. Fan and wedge-shaped, plastic vent cover are operated from a remote wall switch, included. Lowest Prices for the best rv vents and fans from Ventline. Ventline Ventadome Roof Vent w/12V Fan and Wall Switch - Powered Lift - 14-1/4" - Smoke part number V2119-3-533 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (820)
  • Q & A (0)
  • Photos
  • Why etrailer?

Ventline RV Vents and Fans - V2119-3-533

  • Roof Vent
  • With 12V Fan
  • Vent
  • 14W x 14L Inch
  • Tinted
  • Ventline
  • Powered Lift
  • 4-1/2 Inch

This roof vent's powered, 12-volt fan and dome lift provide the ultimate in convenience for ventilating motor homes and enclosed trailers. Fan and wedge-shaped, plastic vent cover are operated from a remote wall switch, included.


Features:

  • Roof vent's electric fan yields better air circulation than non-powered models, exhausting hot air while trailer or RV remains locked and secure
  • Power lift opens and closes cover, eliminating hand cranking
    • Simple to upgrade from non-powered model
  • Included wall remote switch provides convenient operation
  • Translucent cover allows some light through
  • Aerodynamic, wedge-shaped dome made of durable polypropylene
  • Galvanized steel roof flange won't rust or corrode
  • Snap-out screen is easy to clean
  • Polar White interior trim piece (or garnish) is included
  • Fan and power lift use 12-volt DC power
    • Wiring sold separately
  • Made in the USA


Specs:

  • Included garnish fits roofs 2-1/8" to 3-1/4" thick
    • Garnish leg length (depth): 2-1/8"
    • Garnish color: Polar White
    • Other garnish sizes are available (sold separately)
  • Fan capacity: 100 CFM
  • Fan and lift power: 12-volt DC
  • Cover color: Smoke
  • Rough opening size: 14-1/4" x 14-1/4"
  • Vent extends above roof:
    • 4-1/2" Closed
    • 10" Open
  • 2-year warranty


Notes:

  • Screws and sealer are not included. See Installation Kit (344270KITW), which includes all necessary screws and sealer to install vent.
  • Not for use above tubs, showers or range cooking surfaces.


V2119-603-00 roof vent


remote wall switch


Installation Instructions

  1. Mark desired location for vent. Be sure to choose a location between roof joists.
  2. Cut a 14-1/4" x 14-1/4" opening through roof and ceiling. (Or use existing opening if you're replacing a standard 14-1/4" x 14-1/4" vent.)
  3. Apply sealant to bottom of flange. Be sure to surround each screw hole.
  4. Insert vent through hole with screen frame extending through roof cavity and hinge of vent toward the front of the vehicle.
  5. Mount to roof with #8 screws.
  6. Remove screen frame and wiring compartment cover to make electrical connections.
  7. Connect to 12-volt DC power source.
  8. Replace screen frame and cover.
  9. Attach interior garnish piece with #8 screws.


Ventline V2119-603-00 Roof Vent and VC0533-03-A Remote Switch






Customer Reviews

Ventline Ventadome Roof Vent w/12V Fan and Wall Switch - Powered Lift - 14-1/4" - Smoke - V2119-3-533

Average Customer Rating:  4.7 out of 5 stars   (820 Customer Reviews)

This roof vent's powered, 12-volt fan and dome lift provide the ultimate in convenience for ventilating motor homes and enclosed trailers. Fan and wedge-shaped, plastic vent cover are operated from a remote wall switch, included.

by:

This vent works great and was a direct replacement. Also fabulous service from etrailer.com as usual!!!



by:

Just what I needed, thanks



by:

Installed fairly easy except no wiring diagram included. Removed a manual Ventline model. My wife is only 5' 2" tall and could not reach the fan switch or turn knob to open it up. This will be a breeze for her now. I guess being a master ASE truck tech and working on RVs for 15 years helped figure out the wiring. Now that it's installed would almost give it 5 stars.



by:

Works well,



by:



by:



by:



by:

Review from a similar Ventadome in RV Vents and Fans


I bought a returned item and it showed on the listing that it had been bent in the mail when returned. When it arrived there was some additional damage which would not have been easily noticed but two of the rivets that were part of the structure had not been attached when it was made i.e. a manufacturing flaw. We had to drill holes, go buy some rivets and put in rivets or it would not have lasted long. I called and alerted them and I was given an additional discount on the item which was fair of them. Now it is totally perfect, I am very happy with the product and it will last a long time. I specifically got a metal one because the reviews on the less expensive plastic covers say that the plastic doesn't last in the sun and have to be replaced usually within a year or two so it was worth buying one that will still be there intact in ten years. I also had put a reflective finish on my roof to control the heat inside which really works well and I can put that on this cover as well. They were very fair with me on this and I would recommend them to anyone. I also noticed that they are the only company I have ever seen where they do "happy calls" to see if their customers are happy about a year after they purchase their item and this type of superior level service is very rare these days.


Comments
I have had this vent for a year. I love that it is not plastic, it is metal and it is lasting, doesnt leak, is not breaking up or falling apart. It does the job and keeps it warm inside when that is appropriate and lets the air in when that is needed. I drove across country in the middle of February last year when there was summer weather in California and severe winter weather in Massachusetts and everything else in between on the way in my conversion truckRV and the vent worked great and I expect it will last as long as the vehicle. It also is quite secure as it seals tight and would not be easy to break into if someone wanted to break in, unlike plastic which could simply be smashed with a fist as it gets very brittle in the sun. And when you live in a metropolitan area break in is an issue if it looks insecure if you ever park your vehicle on the street.
Nancy - 02/16/2022

by:

Review from a similar Ventadome in RV Vents and Fans


This was EXACTLY what we needed. Great product, easy install and great quality. Thank you because buying online has not been easy and this was?? Thanks again, Taylor
Ps, pics are out with the old and in with the new. We have a 1965 Shasta.



by:

Review from a similar Ventadome in RV Vents and Fans


installed on aluminum A.R.E. DCU truck cap.
Did not use the screw or caulk tape kit since the screws were far to long and the caulking is for rubber roofs. As it is, the smallest screws I found in size #8 were 1/2" long.

THe trim piece might be nice but it also reduces the head room in the space. i elected to not use it for that reason.

THe metal vent cover is what i wanted, though I wish they had smoothed the covers edge; it is sharp for the installer. But once installed it wont be an issue.

The screen is okay, but doesn't seem to completely cover the openings along the edge. If this was a concern, maybe a bit of 1/4" wide foam, backed with tape would make up the difference.

I prefer this type vent assy. with the round knob instead of the crank.

A cardboard template would have been helpful, but obviously not necessary.

With luck it will last half as long as the truck cap ... we'll see.


Comments
So far so good. I have not used it as much as I had anticipated. But it works for me when I do.
Art K - 08/05/2019


by:

Review from a similar Ventadome in RV Vents and Fans


Received the Ventline Ventadome metal roof vent in good condition.
After removing the old plastic roof vent, the new unit slipped right into the existing square hole with no trouble. See the "before" and "after" pictures. The old plastic roof vent only lasted a few years in Wyoming (the 2 X 5 blocks in the "before" picture were duck taped in place to prevent the plastic bag I stuffed in there from blowing away - a temporary fix while waiting for the new vent).

I did not use the polyurethane adhesive between the roof and the vent flange. Everything deteriorates sooner or later especially in Wyoming. If I ever had to replace the vent it would be exceedingly difficult to remove it if stuck down with urethane adhesive. Instead I used ordinary putty (available at most hardware stores). In fact the old vent was sealed with putty. Since the putty layer is thicker than the urethane, I used 1" screws around the flange instead of the 3/4" screws supplied.

A year from now I'll see how the vent has survived.


Comments
How far above the roof does it protrude?
-- comment by: tim - 07/29/2015

Comments
Tim, do you mean the distance from the roof to the top of the lid when closed, or when fully open?When closed it cant be more than a couple of inches. I dont know what it is fully open - maybe 12 inches?Unfortunately the trailer is in Wyoming and I am in Denver right now, so I cant measure it.Paul
-- comment by: Paul - 07/31/2015

Comments
After one year in the Wyoming weather the vent has performed very well: no water leakage and no dust entry. Hail storms were not able to dent the vent lid even though they were severe enough to dent the aluminum trailer roof somewhat. I am pleased with the results. Paul
Paul - 09/04/2015


by:

Review from a similar Ventadome in RV Vents and Fans


Product arrived quickly and everything I needed was in the box to do the roof vent install. So far, very pleased.


Comments
Working well. Want to get another one
Yvonne - 06/01/2021

by:

Review from a similar Ventadome in RV Vents and Fans


I bought this vent because it was low profile ,metal, manual operation and made in the USA. It was easier to install than I thought it would be ; because of the contours in the cap. No problem. The flange was wide enough and the gauge thick enough to make the contour perfectly. I used 100% clear silicone to make the seal.I'll paint it as soon as temperatures get back to normal. I highly recommend this unit.


Comments
Its still working flawlessly
Rich D - 01/06/2018


by:

Review from a similar Ventadome in RV Vents and Fans


As much as I liked having a translucent skylight for my RV's tack room vent, the Florida Sun took its toll. This metal replacement fit-up perfectly, installed fast, and is bulletproof against the weather. I added a battery-powered LED courtesy light to the tack room ceiling and all's well, day or night.



by:

Review from a similar Ventadome in RV Vents and Fans


I love my new metal vent!
My auto is
a Ford 2007 E350 Super Extended cab with 138,0000+ miles which I also love not the miles but the Van.
Living here in the Rocky Mountains above the sleepy town of Las Vegas New Mexico a metal vent was essential as we have surprise hail storms even in the summer time which last year whiped out a record of windshields and metal house roofs!
The installation has awarded me as "Poster Child for the Unprepared'!
My jig saw brand , a "Rigid" non variable speed apparently, needed a new blade I soon found after successfully drilling the roof pilot holes. I had worn it out cutting heavy metal door thresholds.
Off to the town below to discover no one here has the correct blades for my brand. I then caved and bought a great variable speed Black and Decker which accepts Milwaukee blades even available almost everywhere! The drill championed the metal cutout plus murdered my back electric attachment to the dome light LOL! The caulking was for me messy as usual and Dylan had sent just the right amount to fill in even the 4 hole gaps as my roof has deep ridges to deal with after sinking the vent. The screws I found were inadequate for the metal roofing install so back to town this time covered in silver caulking appearing as a giant bird flying overhead had pooped on me lol. Finally back and screws in place to complete the seal I applied the remaining caulking all around the edges and finished with Flex Tape just in case to ward off our winters. As I said I love it! This is a great recommended product with my stamp of approval! Thanks Dylan!



by:

Review from a similar Ventadome in RV Vents and Fans


Holding up to the weather.
Trailer parked
outside.


Comments
Great still like new. Holding up to the elements.
John C - 05/28/2022

by:

Review from a similar Ventadome in RV Vents and Fans


It has been a year since we changed out our vent and it is performing perfectly. We used the roof vent installation kit with the roof vent. Everything was simple to do.



by:

Review from a similar Ventadome in RV Vents and Fans


VENT WAS PACKED IN SAME BOX WITH THE OTHER ITEMS WITHOUT ANY PROTECTION AND THE SCREEN CAME BROKEN.


Comments
Thank you for letting us know! I have sent your information along to our customer service team.
-- Etrailer Expert Brooke M - 04/29/2022

by:

Review from a similar Ventadome in RV Vents and Fans


I bought two of these for my steel roof 1969 Clark Cortez motorhome. I actually ordered the 2nd one after buying and installing the first, so I am a repeat customer with this particular vent. Shipped to my door for cheaper than a vintage supply website offered the exact vent for replacements on vintage airstreams and other trailers. The installation was simple. Looks clean and I LOVE the metal vents. No early morning sunlight over my head in my eyes when camping. :) :) :)



by:

Review from a similar Ventadome in RV Vents and Fans


This vent works as it should. It is pretty light weight, but seems to be holding up well.


Comments
Still working fine. Would purchase again.
Frank - 02/21/2022

by:

Review from a similar Ventadome in RV Vents and Fans


Great roof vent! Very happy with overall design. I think it will last quite a while. Only down fall is the inside framing is a paper thin plastic.super brittle and I'm afraid to snap it while installing. The rest of the design is great especially for the price.



by:

Review from a similar Ventadome in RV Vents and Fans


This kit was complete and easy to install. If you don’t have the solid metal vent get one you factory one is going to dry rot and crack leaving you with a mess. DO IT BEFORE ITS TOO LATE! Buy one!



by:

Review from a similar Ventadome in RV Vents and Fans


Just what I needed. The old plastic lids were cracked and let water inside the trailer. The metal lids did the trick. Great products. Thank you.


Comments
Best roof vent for my cargo trailer. No more broken plastic lids and water inside. Thanks again for all your help.
Bill D - 11/27/2021

by:

Review from a similar Ventadome in RV Vents and Fans


Perfect fit I can’t believe I found this on etrailer. And the price is unbeatable.



by:

Review from a similar Ventadome in RV Vents and Fans


Wasn't too bad to install. Everything worked as stated. I may have gone a little crazy with the self leveling sealant, but that's me.


25
820
Show More Reviews

Ask the Experts about this Ventline RV Vents and Fans



  • Does Motor for Raising and Lowering Lid of Ventline Ventadome part # V2119-3-533 Power In and Out
    The motor that raises and lowers the lid of the Ventline Ventadome part # V2119-3-533 that you referenced powers in and out to raise and lower it.
    view full answer...
    Image 1 for
  • Is There a Way To Add a Wall Controller To An Existing Vent Fan
    I do have an option for you but retrofitting an old unit to work with a wall mounted control won't be an option. Instead, I recommend the Ventline Ventadome Roof Vent part # V2119-3-533 which will be an easy swap and it comes with a wall mounted controller.
    view full answer...
  • Dimensions of Replacement Screen Frame with Screen for Ventline Ventadome Vents
    The Replacement Screen Frame with Screen for Ventline Ventadome Trailer Roof Vents # BVC0573-32 measures 13-1/2" x 13-1/2" which is the same measurement as the one you are replacing. It is a replacement for the Ventline V2119 models of vent, which are the following powered roof vents: - Ventline Ventadome Roof Vent with 12V Fan and Wall Switch - White # V2119-1-533 or Smoke # V2119-3-533 - Ventline Ventadome Roof Vent with 12V Fan - White # V2119-601-00 or Smoke # V2119-603-00
    view full answer...
  • Replacement Vent With Wall Switch For Northern Breeze Vent
    The Ventline Northern Breeze vents and the switch have been discontinued for some time, so the best option really is to replace your vent with a new one that has a wall switch. For that you can continue to go with the Ventline model, the Ventline Ventadome, which is available in either Smoke or White color: - Smoke: Ventline Ventadome Roof Vent with 12V Fan # V2119-3-533 - White: Ventline Ventadome Roof Vent with 12V Fan # V2119-1-533 Both of these will make great replacements for your...
    view full answer...
  • Will a Ventline Ventadome with Fan Work Better To Pull Hot Air Out of Trailer Than Unit Without Fan
    The Ventline Ventadome Roof Vent with 12V Fan part # V2119-3-533 will do an excellent job of helping pull hot air of an an enclosed trailer when compared to the Ventline Ventadome Trailer Roof Vent part # V2092SP-29. In regards to power consumption, you'd need to install an auxiliary battery in order to power the fans throughout the day.
    view full answer...
  • Does the MaxxAir Mini Deluxe Trailer Roof Vent MA00-03851 Have A Wall Switch
    If you need a powered roof vent fan that has a control panel that you can mount on the wall then I recommend using the Ventline Ventadome Roof Vent w/12V Fan and Wall Switch part # V2119-3-533. The controls for the MaxxAir Mini Deluxe Trailer Roof Vent part # MA00-03851 are on the unit itself and there is not a wall mount for this fan so I don't think it would be a good option for what you are looking for but the above will do what you need. The Ventline Ventadome has a 12 volt fan, powered...
    view full answer...
  • Is There a Sway Bar For the 2008 Winnebago Journey Motorhome
    The 2008 Winnebago Journey Motorhome was built on a Freightliner XC chassis. Given that information, the correct sway bar is the Roadmaster Front Anti-Sway Bar # RM-1209-136.
    view full answer...
  • Will MaxxFan Deluxe Roof Vent Keep Fan Setting & Can it be Used With Wall Switch
    The fan setting you are using will remain after turning off the MaxxFan Deluxe Roof Vent with 12V Fan # MA00-05301K, but that is only with the key pad controls on the actual fan. It isn't recommended to use a wall switch with this fan though as it is designed to have constant 12 volts and there could be issues with the circuit board; it hasn't been tested with a switch to know if the fan setting will remain but it is unlikely without having constant power. If you do want to use a 12 volt...
    view full answer...
  • Vent Fan with Dual Switches for a 2008 Winnebago Journey
    From the description you provided it sounds like you are looking for the Ventline Ventadome Roof Vent w/12V Fan # V2119-3-533. This vent fan has the two sperate switches like you described. I have included a photo of the switches you can look at to see if it looks like what you have. We also have this available in white # V2119-1-533. If this is not what you are looking for and you can provide me with the manufacturer and model number of your current fan, I would be happy to help you further.
    view full answer...
    Image 1 for
  • Option to Replace Fan-Tastic Roof Vent 6500/410 With Remote
    We have spoken to Fan-Tastic Vent about this issue in the past, and they have confirmed that there are no replacement remotes available for the 6500 model as it's no longer in production. So if you want to still use your existing fan but also wanted a remote, they said what you can use is the Fan-Tastic Vent 7350 Series Upgrade Kit # FV807359. However, this is similar to getting a brand-new vent, so you can go that route, with a number of different options. For a powered lift with a remote...
    view full answer...
  • Recommended 12 Volt Vent With Wall Mounted Control Switch
    We do have exactly what you need for a roof vent for your camper, so long as it has the standard 14" x 14" square cut out. What you'll need is a 12 volt vent from Ventline, which comes included with a dog-proof wall mounted control switch (ok it isn't technically dog-proof but will certainly never be confused for a chew toy). You have an option for either White or Smoke in color: - White: Ventline Ventadome Roof Vent with 12V Fan and Wall Switch # V2119-1-533 - Smoke: Ventline Ventadome...
    view full answer...
  • Correct Operator Arm Assembly for Existing Dome Lid and Ceiling Garnish for
    The # V2119-3-533 Ventline Ventadome Roof Vents that we have in stock use a plastic sliding connector that installs on a plastic slide ramp built into the underside of the vent lid. The operator arm you suggested, # BVD0462-00, is the correct replacement for these roof vents, and the knob would not be used on the power lift model. If your vent uses a metal fastener, you may need the Replacement Operator Arm, # BV0115-04, that uses a metal spring clip to attach to the underside of the vent...
    view full answer...

Do you have a question about this RV Vents and Fan?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality rv vents and fans for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv vents and fan information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Raymond P
Written by:
Raymond P
Employee Jameson C
Expert Research:
Jameson C
Employee Kathleen M
Updated by:
Kathleen M
Employee Wilson B
Updated by:
Wilson B
Employee Adam Y
Updated by:
Adam Y
Employee Isabelle B
Updated by:
Isabelle B
Employee Cole B
Installed by:
Cole B
Employee Shane H
Test Fit:
Shane H
Employee Michael B
Video by:
Michael B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.