bing tracking image
  1. RV Vents and Fans
  2. Ventline
  3. Roof Vent
  4. With 12V Fan
  5. With Reversible Fan
  6. Vent
Ventline Ventadome Roof Vent w/ 12V Fan - Powered Lift - 14-1/4" x 14-1/4" - Smoke

Ventline Ventadome Roof Vent w/ 12V Fan - Powered Lift - 14-1/4" x 14-1/4" - Smoke

Item # V2119-603-00
lowest price pledge
Our Price: $147.74
You Save: $72.59
RV Vents and Fans
This item qualifies for Free Shipping
Shipping Weight: 4 lbs
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images


Need help with installation?
Locate installers near me
Product Expert Kathleen M

Is this right For you? Product Expert Kathleen M says:

Yes, if you:

  • Are replacing an old worn out fan and want to reuse the same wiring and wall switch
  • Like natural light coming in and adding a little warmth to your camper

No, if you:

  • Camp in warm areas where air movement makes a big difference - a more powerful fan might keep you from having to turn on the AC
  • Need whole new fan with all the hardware and wiring
This roof vent's powered, 12-volt fan and dome lift provide the ultimate in convenience for ventilating motor homes and enclosed trailers. Fan and wedge-shaped, plastic vent cover are operated from a remote wall switch. Lowest Prices for the best rv vents and fans from Ventline. Ventline Ventadome Roof Vent w/ 12V Fan - Powered Lift - 14-1/4" x 14-1/4" - Smoke part number V2119-603-00 can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (820)
  • Q & A (0)
  • Photos
  • Why etrailer?

Ventline RV Vents and Fans - V2119-603-00

  • Roof Vent
  • With 12V Fan
  • With Reversible Fan
  • Vent
  • 14W x 14L Inch
  • Tinted
  • Ventline
  • Powered Lift
  • 4-1/2 Inch

This roof vent's powered, 12-volt fan and dome lift provide the ultimate in convenience for ventilating motor homes and enclosed trailers. Fan and wedge-shaped, plastic vent cover are operated from a remote wall switch.


  • Roof vent's electric fan yields better air circulation than non-powered models, exhausting hot air while trailer or RV remains locked and secure
  • Power lift opens and closes cover, eliminating hand cranking
    • Simple to upgrade from non-powered model
  • Wall remote switch (VC0533-03-A, VC0533-02-A; sold separately) provides convenient operation
  • Translucent cover allows some light through
  • Aerodynamic, wedge-shaped dome made of durable polypropylene
  • Galvanized steel roof flange won't rust or corrode
  • Snap-out screen is easy to clean
  • Fan and power lift use 12-volt system - 110-volt hookup not required
  • Electrical parts and interior garnish sold separately
  • Made in the USA


  • Fan and lift power: 12-volt DC
  • Fan capacity: 100 CFM
  • Cover color: Smoke
  • Rough opening size: 14-1/4" x 14-1/4"
  • Vent extends above roof:
    • 4-1/2" Closed
    • 10" Open
  • 2-Year warranty


  • Screws and sealer are not included. See Installation Kit (344270KITW), which includes all necessary screws and sealer to install vent.
  • Not for use above tubs, showers or range cooking surfaces.

V2119-603-00 roof vent

Installation Instructions

  1. Mark desired location for vent. Be sure to choose a location between roof joists.
  2. Cut a 14-1/4" x 14-1/4" opening through roof and ceiling. (Or use existing opening if you're replacing a standard 14-1/4" x 14-1/4" vent.)
  3. Apply sealant to bottom of flange. Be sure to surround each screw hole.
  4. Insert vent through hole with screen frame extending through roof cavity and hinge of vent toward the front of the vehicle.
  5. Mount to roof with #8 screws.
  6. Remove screen frame and wiring compartment cover to make electrical connections.
  7. Connect to 12-volt DC power source.
  8. Replace screen frame and cover.
  9. Attach interior garnish piece (sold separately) with #8 screws.

V2119-603-00 Ventline Ventadome Trailer Roof Vent w/ 12V Fan - Powered Lift - 14-1/4" x 14-1/4" - Smoke

Customer Reviews

Ventline Ventadome Roof Vent w/ 12V Fan - Powered Lift - 14-1/4" x 14-1/4" - Smoke - V2119-603-00

Average Customer Rating:  4.7 out of 5 stars   (820 Customer Reviews)

This roof vent's powered, 12-volt fan and dome lift provide the ultimate in convenience for ventilating motor homes and enclosed trailers. Fan and wedge-shaped, plastic vent cover are operated from a remote wall switch.


This is the cheesiest thing. No instructions. No hardware. And the plastic surround looks upside down, the hollow part shows out. The plastic is as thin as paper. I paid more for what I thought would be Quality. I guess I got screwed.

I will have our customer service team reach out to you. This vent does not come with installation hardware. You would need part # 344270KITW
Roof Vent Installation Kit - Sealant, Butyl Tape, Screws - White
to complete installation. The lid is intended to be a wedge-shaped dome that is made of a durable polypropylene plastic.
-- Etrailer Expert Jenny N - 12/28/2021


I was more than happy with the service. Easy process arrived as scheduled and its what I ordered
Great service highly recommend etrailer they come threw


It arrived quickly and is exactly what I wanted.


Easy to install, and have had no proble ms


No manual included in the box, no information, just the items were put in the box.

There is actually no instructions or hardware included with the roof vent. If you need hardware, that kit is the Roof Vent Installation Kit - Sealant, Butyl Tape, Screws - White Part # 344270KITW
Roof Vent Installation Kit - Sealant, Butyl Tape, Screws - White
. Installation instructions are available on the product page.
-- Etrailer Expert Thomas M - 01/26/2022


Tammy was awesome to work with and got my order right the first time.
She knows what customer service really is.
Thank you


The shipping was faster than I expected. No instructions or hardware came with the unit. There was no suggestion for which inside bezel, or flashing I would need. Your etrailer on line video’s are very good however! Fortunately I was replacing a similar vent, the screws from the old one worked well. The inside trim fit after a small modification, and looked fine after some cleaning. The vent functions perfectly and I expect it will last a long time.


Happy with the performance.


Nice, well made, quick shipment. I use etrailer quite often for my business.


Was easy to install, along with the switch kit and works very well. Thank you very much.


Quality product


Great Servive and Shipping!!!!!


works great with battery have not yet installed. Bad knee could not climb ladder to cut hole.


Great product and fast shipping


As usual, the product was as advertised and delivered as promised!


it'll do


Thank you for your help!




Review from a similar Ventadome in RV Vents and Fans

I bought a returned item and it showed on the listing that it had been bent in the mail when returned. When it arrived there was some additional damage which would not have been easily noticed but two of the rivets that were part of the structure had not been attached when it was made i.e. a manufacturing flaw. We had to drill holes, go buy some rivets and put in rivets or it would not have lasted long. I called and alerted them and I was given an additional discount on the item which was fair of them. Now it is totally perfect, I am very happy with the product and it will last a long time. I specifically got a metal one because the reviews on the less expensive plastic covers say that the plastic doesn't last in the sun and have to be replaced usually within a year or two so it was worth buying one that will still be there intact in ten years. I also had put a reflective finish on my roof to control the heat inside which really works well and I can put that on this cover as well. They were very fair with me on this and I would recommend them to anyone. I also noticed that they are the only company I have ever seen where they do "happy calls" to see if their customers are happy about a year after they purchase their item and this type of superior level service is very rare these days.

I have had this vent for a year. I love that it is not plastic, it is metal and it is lasting, doesnt leak, is not breaking up or falling apart. It does the job and keeps it warm inside when that is appropriate and lets the air in when that is needed. I drove across country in the middle of February last year when there was summer weather in California and severe winter weather in Massachusetts and everything else in between on the way in my conversion truckRV and the vent worked great and I expect it will last as long as the vehicle. It also is quite secure as it seals tight and would not be easy to break into if someone wanted to break in, unlike plastic which could simply be smashed with a fist as it gets very brittle in the sun. And when you live in a metropolitan area break in is an issue if it looks insecure if you ever park your vehicle on the street.
Nancy - 02/16/2022


Review from a similar Ventadome in RV Vents and Fans

This was EXACTLY what we needed. Great product, easy install and great quality. Thank you because buying online has not been easy and this was?? Thanks again, Taylor
Ps, pics are out with the old and in with the new. We have a 1965 Shasta.


Review from a similar Ventadome in RV Vents and Fans

installed on aluminum A.R.E. DCU truck cap.
Did not use the screw or caulk tape kit since the screws were far to long and the caulking is for rubber roofs. As it is, the smallest screws I found in size #8 were 1/2" long.

THe trim piece might be nice but it also reduces the head room in the space. i elected to not use it for that reason.

THe metal vent cover is what i wanted, though I wish they had smoothed the covers edge; it is sharp for the installer. But once installed it wont be an issue.

The screen is okay, but doesn't seem to completely cover the openings along the edge. If this was a concern, maybe a bit of 1/4" wide foam, backed with tape would make up the difference.

I prefer this type vent assy. with the round knob instead of the crank.

A cardboard template would have been helpful, but obviously not necessary.

With luck it will last half as long as the truck cap ... we'll see.

So far so good. I have not used it as much as I had anticipated. But it works for me when I do.
Art K - 08/05/2019


Review from a similar Ventadome in RV Vents and Fans

Received the Ventline Ventadome metal roof vent in good condition.
After removing the old plastic roof vent, the new unit slipped right into the existing square hole with no trouble. See the "before" and "after" pictures. The old plastic roof vent only lasted a few years in Wyoming (the 2 X 5 blocks in the "before" picture were duck taped in place to prevent the plastic bag I stuffed in there from blowing away - a temporary fix while waiting for the new vent).

I did not use the polyurethane adhesive between the roof and the vent flange. Everything deteriorates sooner or later especially in Wyoming. If I ever had to replace the vent it would be exceedingly difficult to remove it if stuck down with urethane adhesive. Instead I used ordinary putty (available at most hardware stores). In fact the old vent was sealed with putty. Since the putty layer is thicker than the urethane, I used 1" screws around the flange instead of the 3/4" screws supplied.

A year from now I'll see how the vent has survived.

How far above the roof does it protrude?
-- comment by: tim - 07/29/2015

Tim, do you mean the distance from the roof to the top of the lid when closed, or when fully open?When closed it cant be more than a couple of inches. I dont know what it is fully open - maybe 12 inches?Unfortunately the trailer is in Wyoming and I am in Denver right now, so I cant measure it.Paul
-- comment by: Paul - 07/31/2015

After one year in the Wyoming weather the vent has performed very well: no water leakage and no dust entry. Hail storms were not able to dent the vent lid even though they were severe enough to dent the aluminum trailer roof somewhat. I am pleased with the results. Paul
Paul - 09/04/2015


Review from a similar Ventadome in RV Vents and Fans

Product arrived quickly and everything I needed was in the box to do the roof vent install. So far, very pleased.

Working well. Want to get another one
Yvonne - 06/01/2021


Review from a similar Ventadome in RV Vents and Fans

I bought this vent because it was low profile ,metal, manual operation and made in the USA. It was easier to install than I thought it would be ; because of the contours in the cap. No problem. The flange was wide enough and the gauge thick enough to make the contour perfectly. I used 100% clear silicone to make the seal.I'll paint it as soon as temperatures get back to normal. I highly recommend this unit.

Its still working flawlessly
Rich D - 01/06/2018

Show More Reviews

Ask the Experts about this Ventline RV Vents and Fans

  • Direct Replacement for Ventline Ventadome Roof Vent Model 2119
    The roof vents all fit a standard 14-1/4" x 14-1/4" opening so the Ventline Ventadome Roof Vent (Model 2119) part # V2119-603-00 will be a direct replacement.
    view full answer...
  • Replacement for my Ventline Ceiling Fan so I can Still use my Wall Mount Remote
    For your replacement the Ventline Ventadome Roof Vent w/ 12V Fan part # V2119-603-00 will do a great job for you. It will install in the same hole you currently have and it will use the remote that you currently have to operate it. I have attached a video on it for you to check out.
    view full answer...
  • Roof Vent for a StarCraft Pop Up Camper
    We can find you a new roof vent for your StarCraft Camper, though we do not have access to parts list for each year, make and model of trailer. Should you have the standard 14-1/4" x 14-1/4" roof vent opening I recommend taking a look at the Ventline Ventadome # V2092SP-28 for a manual lift vent without a fan, or Ventline Ventadome # V2119-601-00 for a powered lift vent with a 12V fan; this vent is white though it also comes in smoke # V2119-603-00. I've added links to video reviews of...
    view full answer...
    Image 1 for
  • Can Electric Powered Lift be Added to Ventline and Fan-tastic Vents with Manual Lift
    There might be a way to add electric lift to your Ventline vent but there isn't a kit for it. This means that you would need each individual part and try to cobble it all together since there are no instructions for converting a manual lift to a powered lift. Honestly it would be much easier and less frustrating to just replace the vent assembly. For your Fan-tastic vent there may be a kit to upgrade to powered lift but it depends on the model of the vent. If you have a 3350 series you...
    view full answer...
  • Recommended Ventline Ventadome Roof Vent to Allow Most Light to Shine Through into RV
    Both the Ventline Ventadome Roof Vents you mentioned in your question, the White # V2092SP-25 and the Smoke # V2119-603-00 have translucent covers, which will allow for some light to shine through into your RV. The smoke color Roof Vent will act more as a heavily tinted window, so probably won't be quite as bright as the White Roof Vent when the sun is shinning. I recommend going with the White # V2092SP-25 if you are wanting the brightest possible solution, although keep in mind that...
    view full answer...
  • Dimensions of Replacement Screen Frame with Screen for Ventline Ventadome Vents
    The Replacement Screen Frame with Screen for Ventline Ventadome Trailer Roof Vents # BVC0573-32 measures 13-1/2" x 13-1/2" which is the same measurement as the one you are replacing. It is a replacement for the Ventline V2119 models of vent, which are the following powered roof vents: - Ventline Ventadome Roof Vent with 12V Fan and Wall Switch - White # V2119-1-533 or Smoke # V2119-3-533 - Ventline Ventadome Roof Vent with 12V Fan - White # V2119-601-00 or Smoke # V2119-603-00
    view full answer...
  • What Size Wire Should be Ran Through a Trailer to Power a Roof Vent Fan
    The wiring used on vent fan motors for trail vents like # V2119-603-00 is not very large so I would not go any larger than 16 gauge like # 16-1-1 sold by the foot.
    view full answer...
  • Compatibility of Ventline Replacement Screen BVC0573-32 and Garnish Trim Ring VA0445-37
    Ventline Replacement Screen # BVC0573-32 actually installs on the compatible vent itself, not on the garnish trim ring such as # VA0445-37. This screen fits on Ventline Ventadome V2119 RV roof vents like # V2119-601-00 and # V2119-603-00. The garnish trim piece # VA0445-37 also fits this vent and other Ventline vent models V2092, V2094 and V2110.
    view full answer...
  • What Switch Setup Should be Used with the Ventline Ventadome Roof Vent
    The Ventline RV roof vent part # V2119-603-00 has a power lift and fan function that was designed to be wired to the wall switch # VC0533-03-A. This has two switches on it. One for the lift motor to raise and lower the lid and another to control the fan motor.
    view full answer...
  • Replacement Lift Gear Recommendation For 1995 Winnebago Luxor RV
    I believe we have what you need. If you are looking for a replacement gear for a Ventline ventadome roof vent then you need the Replacement Plastic Gear for Trailer Roof Vent, Item # BVD0121-00. This fits items like the Ventline Ventadome Roof Vent, Item # V2119-603-00. It is 1-9/16 inches in diameter and 1/4 inch thick. The screw is not included so if you need that then you will need Replacement Gear Mounting Screw, Item # VC0270-00.
    view full answer...
  • Power Roof Vent That Wires To Switch Plate
    Yes, the Ventline Ventadome Roof Vent part # V2119-603-00 is designed to wire to a switch like the one you mention part # VC0533-03-A. I have attached a wiring diagram for your reference. The Ventadome Roof Vent also comes in white part # V2119-601-00.
    view full answer...
    Image 1 for Image 2 for
  • Need Wiring Instructions for Wall Remote Switch # VC0533-03-A on Ventadome Roof Vent with 12V Fan
    I have attached a wiring diagram for the Ventline Remote Switch, # VC0533-03-A, that is used with the Ventline Ventadome Roof Vent with 12 Volt Fan # V2119-603-00.
    view full answer...
    Image 1 for
  • Replacement Powered 12V Vent & Installation Kit for 5th Wheel Trailer
    For a replacement 5th wheel trailer vent that measures 14 x 14-inches you can refer to the linked page that displays all such products that include a 12V powered fan motor. For a variable speed 12V fan assembly with a powered lift feature and remote control you can use # FV807350 from Fan-Tastic Vent, the item you referenced, or part # FV803350. Other options from Ventline include # V2119-601-00 with a white dome and # V2119-603-00 with a smoke dome. Vent installation requires an installation...
    view full answer...
  • Need A Replacement Dome For My Ventline Roof Vent.
    According to my research I can not find a replacement dome with the side mounted lift arm for that model anymore. You can replace it with the Ventline Ventadome Roof Vent w/ 12V Fan - Powered Lift - 14-1/4" x 14-1/4" - Smoke # V2119-603-00. I do favor the MaxxAir Mini Deluxe Trailer Roof Vent w/ 12V Fan - Powered - 1 Speed - Black # MA00-03851. I like the style and build of the unit. plus it has a built in light. There is no need to install a separate vent cover due to the integrated...
    view full answer...
  • Roof Vent Recommendation For A 1978 VW Adventurewagen
    Instead of going with the MaxxFan Roof Vent w/ 12V Fan # MA00A04301K mentioned before, I suggest taking a look at the: -Fan-Tastic Vent Roof Vent w/ 12V Fan and Thermostat # FV803350 instead. This roof vent is designed to fit RV, camper, and trailer roofs up to 4" thick, unlike the MaxxFan Deluxe you mentioned which will fit roofs 2"- 4-1/2". Additionally, this fan is also reversible, and the variable speed fan offers two modes of operation that allow you to boost or reduce airflow...
    view full answer...
    Image 1 for Image 2 for
  • Garnish Recommendation for Use with Ventline Roof Vent V2119-603-00
    The roof vent part # V2119-603-00 that you referenced does not include the roof garnish. For that you would want the part # VA0445-35 for a 3-1/8 inch garnish. For a 5-1/8 inch garnish we have the part # VA0445-37.
    view full answer...
  • Which Vent Fan Assemblies are Produced in the USA
    While the MaxxFan vent assemblies # MA00-06401K and # MA00-07500K are not made in the USA, the Ventline and Fantastic Vent assemblies are. The Fan-Tastic Roof Vent # FV802250 (manual lift) and # FV807350 (powered lift) are both 14 x 14 inches and tinted with a 12v fan, just like the two MaxxFan assemblies you referenced. We also offer similar Ventline products, including the E-Z Lift Roof Vent # V3094-603-00 (manual) and # V2119-603-00 (powered). Both of these vent assemblies are also...
    view full answer...
  • Vent Fan with Dual Switches for a 2008 Winnebago Journey
    From the description you provided it sounds like you are looking for the Ventline Ventadome Roof Vent w/12V Fan # V2119-3-533. This vent fan has the two sperate switches like you described. I have included a photo of the switches you can look at to see if it looks like what you have. We also have this available in white # V2119-1-533. If this is not what you are looking for and you can provide me with the manufacturer and model number of your current fan, I would be happy to help you further.
    view full answer...
    Image 1 for
  • Replacement Fan Blade For Ventline Ventadome Roof Vent On 1986 Airstream 345 Classic Motorhome
    We do carry a couple replacement fan blades for Ventline Ventadomes. The first fan blade I recommend is part # BVC0466. This is designed to fit 12V Ventadomes with a .125 inch diameter shaft. This fan blade measures 6 inch diameter. The other fan blade we offer is part # BVD0215-00. This fan blade is designed to fit newer Ventadome roof vents like part # V2119-603-00 and part # V2094SP-28.
    view full answer...
    Image 1 for Image 2 for
  • Dark Replacement Cover for a Ventline V2119
    We do have the correct cover for your Ventline V2119 but the Vent Cover # BBC-0530-04 that you referenced is not it. This vent cover has a continuous hinge on it whereas the one you are looking for does not. The cover you are needing instead is the Replacement Dome Assembly # BVD0449-A03. This fits your V2119 model so that you will have the assembly part # V2119-603-00. This cover is darker than the blue/grey cover that you referenced and it will do a good job at keeping sunlight out...
    view full answer...
  • Replacement Roof Vent for Ventline VA123 Part Number AS-13M-VA123
    The Ventline V123 is an obsolete part, but the good news is that it's a standard 14" x 14" roof vent, so you've really got unlimited options. I recommend using the Ventline E-Z Lift Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - Smoke - Canada Approved # V3094-603-00C, which is a manual lift vent that will fit in your roof opening. If you'd like to upgrade to a powered lift vent, the Ventline Ventadome Roof Vent w/ 12V Fan - Powered Lift - 14-1/4" x 14-1/4" - Smoke # V2119-603-00...
    view full answer...
  • Replacement Bathroom Vent With 12v Fan
    Thanks for the information and details on what you want, let me show you what we have for you: **MaxxFan Mini Plus Manual RV Roof Vent w/ 12V Fan - LED Light - White # MA00-03801. **MaxxFan Mini Plus Manual RV Roof Vent w/ 12V Fan - LED Light - Black # MA00-03851. *TremPro 644 Silicone Sealant - 10.1-Fl-Oz Cartridge - Whitem # 0160297. *Alpha Systems Butyl Tape for RV Weatherproofing - 20' x 1" x 3/16" - White # AL28FJ. This MaxxFan mini plus will fit in the standard 14x14 inch cutout...
    view full answer...
  • Replacement Trailer Roof Vent Assembly for Heartland North Trail 22fbs Camper
    We can help you with choosing a replacement roof vent assembly for your trailer. You can use the linked page to see complete trailer vent assemblies, including options with clear or colored plastic lids or with metal construction. Most square roof vents are 14 x 14-inches and are designed to fit roof openings that measure 14-1/4 x 14-1/4. Just click on the filter for your size to see all vents that will work for you. If you prefer a manual vent with a flat metal lid you I recommend #...
    view full answer...
  • Installation of Wiring and Switch for Ventline Ventadome Roof Vent with Powered Lift
    Correct, the Ventline Ventadome Roof Vent w/ 12V Fan with Powered Lift, # V2119-603-00 will require use of the Wall Remote Switch for Ventline Ventadome Roof Vent, # VC0533-03-A in white, or VC0533-02-A for black face plate. The Ventline Ventadome, # V2119-603-00 has two sets of wiring pigtails, see the linked product video below. Each set will require a connection to the switch, you have the powered set but will need the circuit for the on/off switch to run parallel. Use Primary Wire,...
    view full answer...

Do you have a question about this RV Vents and Fan?

  • Why

    At we guarantee:
  • Highest quality rv vents and fans for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv vents and fan information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Raymond P
Written by:
Raymond P
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Kathleen M
Updated by:
Kathleen M
Employee Wilson B
Updated by:
Wilson B
Employee Adam Y
Updated by:
Adam Y
Employee Isabelle B
Updated by:
Isabelle B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.