Is this right For you? Product Expert Kathleen M says:
Yes, if you:
Get tired of twisting knobs and prefer opening the vent with the quick push/pull of a lever instead
Camp during cooler weather and need sunlight to stream in through the vent lid to help keep you warm
No, if you:
Stay in areas with frequent rainstorms and worry about getting to the vent in time to close it before anything gets damaged
Have a 20' long or larger RV and need something with more oomph to pull more air out
This roof vent has a single-speed fan that circulates air, and it opens quickly and easily with the spring-loaded handle. The handle locks the translucent, wedge-shaped dome into 10 different positions. Install kit and garnish sold separately. Lowest Prices for the best rv vents and fans from Ventline. Ventline E-Z Lift Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - Smoke part number V3094-603-00 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
All Info
Reviews (101)
Q & A (0)
Related Parts
Photos
Why etrailer?
Ventline RV Vents and Fans
- V3094-603-00
Roof Vent
With 12V Fan
Vent
14W x 14L Inch
Tinted
Manual Lift
Ventline
4 Inch
This roof vent has a single-speed fan that circulates air, and it opens quickly and easily with the spring-loaded handle. The handle locks the translucent, wedge-shaped dome into 10 different positions. Install kit and garnish sold separately.
Features:
Roof vent has a fan that pushes stale air out of your RV, camper, or enclosed trailer
Vent allows air to circulate while your RV remains locked and secure
12V DC, 8-blade, single-speed fan
On/off switch is mounted to vent
Fan rotates counterclockwise
Easy-to-use handle lets you quickly open and close the vent from inside your RV
Spring-loaded handle locks into 10 different positions
No gears - opens vent faster than a standard crank handle or hand knob
Ergonomic T-shape is easy to grip
Aerodynamic, wedge-shaped dome (or lid) is made of durable smoke-colored polypropylene
Translucent dome allows some light through
Polar white screen snaps out for easy cleaning
Vinyl weather seal helps keep water out when vent is closed
Manual lift design
White, 1/4" thick mounting flange is built in
UV-resistant, long-lasting specialty polymer plastic construction
Smooth edges won't cut you during installation
Works well with all roofing materials
2-Wire design
Black wire is power
White wire is ground
Interior trim piece (or garnish) and installation kit sold separately
4 Mounting points on flange allow for installation of a vent cover (sold separately)
Made in the USA
Specs:
Rough opening size: 14-1/4" wide x 14-1/4" long
Overall dimensions (outside of flange to outside of flange): 16-1/2" wide x 16-1/2" long
Vent extends above roof:
4" When closed
9-1/2" When fully open
Overall fan diameter: 5"
Fan shaft diameter: 0.091"
Fan capacity: 100 CFM
Power draw: 1.2 amps
Limited 2-year warranty
Note: Not for use above tubs, showers, or range cooking surfaces.
Spring-Loaded Handle on Ventline E-Z Lift Ventadome
The easy-to-use handle on the E-Z Lift Ventadome lets you quickly open and close the roof vent from inside your RV. Unlike a standard handle or knob that can take time to crank, the handle on this vent is spring loaded. Simply pull on the handle and move it into one of 10 positions to open the vent. Each position offers a different degree of opening, and the handle locks into place. Also, the handle's T-shape makes it easy to grip.
Integrated Mounting Points for Vent Cover
There are 4 mounting points built into the flange of this roof vent. These points allow you to install a vent cover (sold separately) over the roof vent.
Installation Instructions
Note: Interior trim piece (garnish) and installation kit with screws and sealant are sold separately.
Mark desired location for vent. Be sure to choose a location between roof joists.
Cut a 14-1/4" x 14-1/4" opening through roof and ceiling. (Or use existing opening if you're replacing a standard 14-1/4" x 14-1/4" vent.)
Apply sealant to bottom of flange. Be sure to surround each screw hole.
Insert vent through hole with screen frame extending through roof cavity and hinge of vent toward the front of the vehicle.
Mount to roof with #8 screws.
Remove screen frame to make electrical connections.
Connect to 12-volt DC power source.
Replace screen frame.
Attach interior garnish piece with #8 screws.
V3094-603-00 Vent Line Easy Lift Ventadome RV Roof Vent w/ 12-Volt Fan - 14-1/4" x 14-1/4" - Smoke
Average Customer Rating: 4.8 out of 5 stars (101 Customer Reviews)
This roof vent has a single-speed fan that circulates air, and it opens quickly and easily with the spring-loaded handle. The handle locks the translucent, wedge-shaped dome into 10 different positions. Install kit and garnish sold separately.
by: Angelo S06/25/2016
Won't be adding power to it for a few months, fits like a glove on my 76 vw camper high top. The handle dosent like popping into full closed without being pushed upward so i don't know if the plastic teeth on the hight selector will wear out or break after several years of driving. I don't know how water resistant the fan motor is, i just get nervous when i see a metal cover on something that gets power and will get wet. Otherwise it looks pretty okay. I do like the solid spring loaded locking mechanism, it's pretty solid, and the handle looks stronger in person than in the pic, no worries about the springs not being able to keep the top locked into position. I plan on using it on a convention vehicle and there may be costumers so the handle profile might be an issue if you have super thick fingers or in costume.265057
This fan worked great and was easy to i nstall.1040840
by: Ross 05/05/2020
Just what I needed, at a good price and reasonable shipping costs. A call to the Seller to upgrade my shipping was handled quickly and courteously. 793057
by: Brandy08/09/2017
Nice addition 418008
by: Michael08/24/2021
Review from a similar E-Z Lift Ventadome in RV Vents and Fans
love the EZ lift vent. etrailer is a pleasure to do business with. look no further for trailer parts, these guys are the best. pretty good install if I do say so myself.1133272
Review from a similar E-Z Lift Ventadome in RV Vents and Fans
I have purchased these before. Although they are not a real high end product, they are a good quality and I really like the way they open and close. I replaced all my vents with these this time around. Plan on getting vent covers for them. Had no problems with past purchase. 546363
It is still going strong, and we have installed another roof vent in my own van in the later part of 2019. Pictures are still in the process of being uploaded with another review.
Dita M - 02/24/2020
70262
by: Chancy06/20/2022
Review from a similar E-Z Lift Ventadome in RV Vents and Fans
Received the package in the mail within a few days. Was ordered as a backup due to the fact that [retailer] sold me a camper that was missing the vent lid and nobody could come up with one. Had I read reviews of [retailer] sales prior, I would have avoided buying from them. Everyone was sold out of just the lids so I ordered the entire vent so I could have the lid.1315131
by: Lorie 10/06/2021
Review from a similar E-Z Lift Ventadome in RV Vents and Fans
Even though the part was not for our "vintage" of pop up trailer, it was easy to install, looks great, and we now have a working vent with no cracks, breaks, or tears in the screen.1173232
by: Tom06/15/2022
Review from a similar E-Z Lift Ventadome in RV Vents and Fans
Product works great 1312993
by: Keith06/09/2022
Review from a similar E-Z Lift Ventadome in RV Vents and Fans
Fit Perfectly! 1310698
by: Nancy02/09/2017
Review from a similar E-Z Lift Ventadome in RV Vents and Fans
Haven't yet installed the new rv roof vent, but am already impressed with the way it is made. Especially the rim touching the roof. Its made flat and looks like it will adhere very well with the caulk. I also like the opening mechanism which is different than older ones. 340104
Comments
Great. Thank you for this product. And pleased with your service!
Nancy C - 02/12/2018
34658
by: Daron03/25/2022
Review from a similar E-Z Lift Ventadome in RV Vents and Fans
Order shipped and delivered super fast. Was exactly what I ordered and needed. Thx for the quick delivery.1277508
by: Daniel B.05/29/2017
Review from a similar E-Z Lift Ventadome in RV Vents and Fans
I just completed installation of the V3094-603-00C roof vent with the VA0445-34 ceiling garnish on my home built camper. The products are well made and just as described. I like the way the spring loaded T-handle operates, it is easy to use with positive latching in all positions. Also, the tinted dome allows light to come through which helps a lot in my small camper. As always, shipping was fast . I appreciate the support from George J and Conner L. Thank you, I will continue buy from etrailer.386187
by: Amanda 08/16/2021
Review from a similar E-Z Lift Ventadome in RV Vents and Fans
Vent is as described and worked well for our DIY trailer. Shipping was prompt and arrived on time!1124142
by: Jim06/01/2018
Review from a similar E-Z Lift Ventadome in RV Vents and Fans
I needed to update the vent on my enclosed trailer and ordered one from etrailer.Very nice vent and it complements the trailer. Very pleased with every aspect of online shopping at etrailer..
515575
by: Gregory03/18/2022
Review from a similar E-Z Lift Ventadome in RV Vents and Fans
Great place 1274234
by: Mike Mo09/12/2016
Review from a similar E-Z Lift Ventadome in RV Vents and Fans
This item is for my WW cargo trailer (6' X 12'), in hopes that it will provide a little light and somewhere for the very hot air to go. Last month we had almost two weeks of over 100 degree heat. It looks like it is going to be just what I need for some relief. Thanks for asking. Mike Mo293942
by: Miquel08/05/2021
Review from a similar E-Z Lift Ventadome in RV Vents and Fans
Great product and service I buy my trailer axles from you guys as well.1114487
by: Robert01/11/2019
Review from a similar E-Z Lift Ventadome in RV Vents and Fans
The vent cover assemblies arrived in a timely manner and in great condition. The quality of the products are better than anticipated. These vents will take the place of two that are 10 years old and 100,000 miles of traveling all over the U.S.A. like the all plastic assembly as my old vents were beginning to show wear and tear. 596811
by: Jason 07/22/2021
Review from a similar E-Z Lift Ventadome in RV Vents and Fans
Appears to be very well made. The flange around the outside is definitely thicker than I thought it would be. It's probably 3/16"-1/4" thick. Have not installed as of yet.1101434
by: Chuck 10/06/2021
Review from a similar E-Z Lift Ventadome in RV Vents and Fans
The price was better than anyones and the spped of delivery was faster than promised.1173453
by: Robin 08/27/2021
Review from a similar E-Z Lift Ventadome in RV Vents and Fans
The quality, fit and finish look great! 1136638
by: Loren03/25/2018
Review from a similar E-Z Lift Ventadome in RV Vents and Fans
Works great. Excellent replacement for the old one. 488855
Comments
Still very pleased with the purchase etrailer is the first place I go when I need trailer related items.
I spoke with my contact at Ventline regarding your E-Z Lift Ventadome Trailer Roof Vent # V3094-603-00C.
To remove the screen, you will just need to release the 8 tabs by pressing a small screwdriver to them. You can release one tab at a time. Once all the tabs are released, the screen should pop out for easy cleaning. I have attached an image that shows one of these tabs for you to check out. view full answer...
If the Ventadome roof vent you have on your trailer has four mounting points then the replacement vent cover is part # BVE0108-03.
This dome is designed to fit # V3092-601-00, # V3092-603-00, # V3094-601-00, # V3094-601-00C, # V3094-603-00, and # V3094-603-00C vents. view full answer...
You would need the standard MaxxAir Vent Cover part # MA00-933069 as a vent cover for the top of your Ventline E-Z Lift Ventadome # V3094-603-00C. view full answer...
We do have the MaxxAir standard vent cover, # MA00-933069, since the MaxxAir II doesn't work with vent # V3094-603-00. The cover is also available in white # MA00-933066. From what I could find these are the only two that will work. view full answer...
First thing we gotta do is identify the roof vent lid you need. Which to do that you need to look at the hinge setup of the vent and the shape of the lid. I attached a picture that has a few different common styles. If you can check the picture out and compare to the vent assembly on your trailer we can determine what you need and from there determine the install.
I also attached a link to a page that has all of the vent lids we offer as well. view full answer...
The Northern Breeze trailer vent has been discontinued, and as such there are few replacement parts available now, and that includes the screen. While I know it is not exactly what you wanted to hear, the best option available is to replace your Northern Breeze vent.
The good news is that these vents fit standard cut outs of roughly 14" x 14" and are economical of you go with the simple manual-crank vent.
For that I recommend checking out the Ventline Ventadome Trailer Roof Vent # V2092SP-28.
Or... view full answer...
Yes. If you've got a Ventline E-Z Lift Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - Smoke - Canada Approved # V3094-603-00C, which is the same as the V3094 you mentioned, then the Replacement 12V DC Motor for Ventline, Ventadome, and Vanair Fans # BVD0218-00 is the correct replacement motor. If you also need the fan, that can be replaced with the Replacement Fan Blade for Ventline E-Z Lift Ventadome Trailer Roof Vents # BVE0114-00. view full answer...
You are correct that the replacement motor was discontinued a number of years ago, and the motor you asked about won't work as they aren't interchangeable parts due to size, current, etc. So the only option really is a new vent, and you can choose from a standard one or go for a nice upgrade.
For example basic option like the Ventline E-Z Lift Ventadome Trailer Roof Vent with 12V Fan # V3094-603-00 or something like the 4-speed MaxxFan Plus Roof Vent with 12V Fan and Thermostat # MA00-04002K.
I... view full answer...
I determined that your Ventline exhaust fan v2525 is a northern breeze model and unfortunately we do not carry a replacement motor. I recommend Replacement Roof Vent for MaxxFan Plus Roof Vent w/ 12V Fan - Powered Lift - 10 Speed - Smoke Item # MA99FR. This vent is a powered lift with 10 speeds for better airflow when needed.
With having hands on experience installing and using these here I would go with the maxxair. It is an unbelievable difference inside the camper/RV if you have never... view full answer...
I do have replacement covers available if your roof vent has a continuous hinge. If you are looking for a smoke vent cover then you can use part # BV0554-03 or part # BV0554-01 for a white vent cover. The dimensions you provided are an industry standard size which is classified as 14-1/4" x 14-1/4" so there is no need to get hung up on the 1/4" difference for the inside dimension as these measurements could vary depending on where they are taken from. The covers both measures 15" x 15"... view full answer...
Thanks for the photo, and there isn't a specific vent cover that is going to attach to those plastic tabs, but so long as your Dexter vent is the standard size, measuring 14-1/4" x 14-1/4" at the roof opening, you can use a Fan-Tastic Vent cover, which comes in either White or Black:
- White: Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover # FVU1500WH
- Black: Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover # FVU1500BL
I have added links below to a video review as well as installation... view full answer...
While the MaxxFan vent assemblies # MA00-06401K and # MA00-07500K are not made in the USA, the Ventline and Fantastic Vent assemblies are.
The Fan-Tastic Roof Vent # FV802250 (manual lift) and # FV807350 (powered lift) are both 14 x 14 inches and tinted with a 12v fan, just like the two MaxxFan assemblies you referenced.
We also offer similar Ventline products, including the E-Z Lift Roof Vent # V3094-603-00 (manual) and # V2119-603-00 (powered). Both of these vent assemblies are also... view full answer...
We have a couple of options for your 2019 CargoMate Blazer enclosed trailer depending on the features that you want.
If you're just wanting a standard vent with no fan you can install the Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - Smoke # V2092SP-29. This roof vent allows air to circulate in your enclosed trailer, keeping the interior ventilated without compromising security. The wedge-shaped, smoke-colored plastic vent cover opens and closes from inside with... view full answer...
Since you mentioned that the MaxxAir Standard RV and Trailer Roof Vent Cover # MA00-933069 will not fit your Ventline E-Z Lift Ventadome Trailer Roof Vent # V3094-603-00C I recommend going with the Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover # FVU1500BL.
The Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover # FVU1500BL works with standard and high-powered vents from other manufacturers that measure 14-1/4" x 14-1/4" at the roof opening and has slightly larger dimensions at... view full answer...
The Ventline V123 is an obsolete part, but the good news is that it's a standard 14" x 14" roof vent, so you've really got unlimited options. I recommend using the Ventline E-Z Lift Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - Smoke - Canada Approved # V3094-603-00C, which is a manual lift vent that will fit in your roof opening. If you'd like to upgrade to a powered lift vent, the Ventline Ventadome Roof Vent w/ 12V Fan - Powered Lift - 14-1/4" x 14-1/4" - Smoke # V2119-603-00... view full answer...
The 14" measurement you got is actually pretty standard, so that will make finding replacements a lot easier. I have three options listed out below for you to check out.
First is the MaxxAir Mini Deluxe Trailer Roof Vent w/ 12V Fan - Powered Lift # MA00-03851. This is a powered lift vent with a fan and will fit roofs that are 1 inch thick, up to 4-1/2 inches thick, so it's adaptable. The price on this one also makes it kind of hard to beat.
Next we have the Ventline E-Z Lift Ventadome... view full answer...
Highest quality rv vents and fans for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.
Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
Most detailed, accurate rv vents and fan information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.
Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.