etrailer SD Non-Binding Tow Bar for Roadmaster Crossbar-Style Base Plates - RV Mount - 6,000 lbs
(194 reviews)
Price: $669.95
etrailer SD Non-Binding Tow Bar for Roadmaster Crossbar-Style Base Plates - RV Mount - 6,000 lbs
Item # e44ZR
Retail:$1,020.45
Our Price: $669.95
You Save: $350.50
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (194)
- Q & A (0)
- Photos
etrailer Tow Bar - e44ZR
- Fits Roadmaster Base Plates - Crossbar
- Telescoping
- Hitch Mount Style
- 6000 lbs
- etrailer
- Non-Binding
- Stores on RV
- Steel
This versatile tow bar is easy to use, with arms that support their own weight while you hook up and swing to either side for storage. Integrated safety cables keep your setup streamlined and organized. Built-in rise/drop keeps tow bar level.
Features:
- Safely bring your vehicle along behind your RV
- Self-supporting arms won't fall to the ground as you're hooking up
- Smoothly extend and pivot to reach the base plate
- Automatically lock into towing position when you pull forward
- Extra-long arms help you make tight turns
- Built-in rise/drop and tilt ensure tow bar is level during towing
- Quick disconnect, even on rough terrain, with non-binding levers
- Organized setup
- Straight safety cables are integrated into the tow bar
- Storage rod keeps electrical cord (sold separately) off the ground
- Effortless storage: swing arms to the left or right and they'll lock in place
- Compatible with Roadmaster crossbar-style base plates with included adapters
- Steel construction with an E-coat finish resists corrosion
- Lifetime technical support from the experts at etrailer.com
- Made in the USA
Specs:
- Fits: Roadmaster Crossbar-Style base plates
- Application: 2" x 2" trailer hitch receivers
- Arm length (from center of hitch pin hole at end of shank to center of base plate pin hole when lined up with arms straight):
- Extended: 51-3/4"
- Retracted: 39-1/4"
- Built-in rise/drop: 1-1/2"
- Head tilts an additional 3" up or down to keep tow bar level with the road
- Weight capacity: 6,000 lbs
- Weight: 41 lbs
- Safety cable rating: 14,000 lbs
- Lifetime limited warranty
Note: If you use this tow bar in the rise or drop position you may need to add safety cable extensions (sold separately) to reach your tow vehicle's hitch.
Works with Roadmaster Crossbar-Style Base Plates
If you already have a Roadmaster Crossbar-Style base plate or are planning on getting one, this kit includes the needed brackets to make this tow bar compatible. This crossbar will replace the one on your base plate so the tow bar can connect. All the hardware is included.
Easy Hookup: Self-Supporting Arms
The etrailer SD has a lot of smart features that give you the flexibility to hook up your toad (towed vehicle) to your RV, without the need for your vehicle to be perfectly level or in the exact right spot.
First of all, the arms are self-supporting, meaning that they hold themselves up without your help and won't fall to the ground when you let them go. They also move independently of each other, so you can focus on getting just one arm connected at a time. You'll never be stuck wrestling with a heavy tow bar.
Just slide the tow bar into your hitch and pin it in place. The telescoping arms will extend, pivot, and tilt to the needed length and angle to reach the tabs on your base plate. You can get hooked up and on with your adventure.
Once the tow bar's connected, slowly pull forward and the self-aligning arms will fully extend and lock into the towing position. Double check that the arms are properly latched and you'll be ready to hit the road!
Important: The arms need to be set up so that the storage rod is on the outside of the arm. Otherwise, the tow bar could be damaged when taking turns.
Extra-Long Arms Get You Around Tight Turns
The SD's arms are longer than average, giving you an above-average turning radius. You're going to be able to get around obstacles and make sharp turns with no worry of clipping the corner of your RV. Maneuver through gas stations and the campsite no problem.
Built-In Rise/Drop
It's important that your tow bar is as level as possible while you're flat towing, with no more than a 3" difference between where the tow bar sits in the hitch receiver and where the arms meet the base plate. It's fairly common for the hitch on an RV to sit too high in comparison to the toad, making it necessary to buy a high-low adapter.
With etrailer tow bars, the rise/drop is built right in, so it's less likely that you'll need an extra adapter. The head joint is also able to tilt up and down so you can make the tow bar level for your particular setup.
Non-Binding for Easy Disconnect
Uneven ground and sharp angles can put the arms of the tow bar in a bind and make them stiff and immoveable. Once you get to your destination, the last thing you need is to spend several minutes wrestling, yanking, and kicking at them to get your car disconnected.
Instead, get out of a bind in one easy step. Simply give the trigger on the arm of the SD a squeeze to disengage the internal latch. This releases the pent-up pressure so you can unhook and get on with your adventure.
Each trigger release latch is positioned on the side of the tow bar arm. This allows for a comfortable yet firm grip, unlike latches that are positioned on the tops of tow bar arms, which can be difficult to grab. This out-of-the-way placement also creates a clean look for the tow bar.
Organized Setup: Integrated Safety Cables
Two straight, vinyl-coated safety cables are integrated right into this tow bar, keeping them from dragging on the ground and getting damaged. They won't get lost or tangled either; your whole setup will be streamlined and organized.
These cables, required by law, will keep your toad behind your RV if there's ever an accidental disconnect while you're towing. The steel S-hooks on each end of the cables connect to the toad's base plate and the RV's trailer hitch, with spring-loaded latches to ensure that they stay connected.
The etrailer safety cables are rated at 14,000 lbs, regardless of the rating of the tow bar. While it's not necessary to have such a high rating, it's nice to know that in the event of an emergency disconnect, these heavy-duty cables will be more than capable of catching your vehicle. If all else fails, these safety cables won't.
The tow bar also offers a convenient storage rod for securing your coiled electrical cord (sold separately). The rod holds your power cord neatly out of the way and up off the ground.
Ridiculously Easy Storage
The etrailer SD is incredibly easy to store on the back of your RV. Most RV-mounted tow bars require you to lift the heavy arms all the way up; they have to be fully vertical before you can secure them in the stowed position. With etrailer tow bars, all you have to do is raise the arms an inch or two - which you probably would do anyway while unhooking - and swing them to either side. When you lower them down again, the locking pin will automatically slide into the built-in tab. They can store to the left, right, or with one arm each way, however is convenient for you.
etrailer Technical Support
At etrailer, we're committed to the products we sell, and to helping our neighbors journey. We don't just sell it; we've installed it, we've wired it, and we've towed with it, so you're getting your answers straight from the experts. Our etrailer technicians perform flat tow installations on a daily basis, so they know all about your tow bar firsthand. For the life of your tow bar, our experienced and knowledgeable staff are available via phone, email, and chat to help you with any questions or concerns.
What You Need to Flat Tow
Flat towing can be a much more convenient way to take your car RVing with you than using a trailer or a tow dolly. It'll save you storage space both at home and at the campsite, and it takes less time and hassle to hook up.
To flat tow your vehicle, there are 5 basic components you're going to need: a tow bar, a base plate kit, a safety cable set, tow bar wiring, and a flat tow braking system.
| For the RV | Between the RV and Towed Car | For the Towed Car |
|---|---|---|
| Hitch | Tow bar | Base plate |
| Wiring plug | Safety cables | Braking system |
| Wiring adapter cord | Wiring kit/diodes |
The custom-fit base plate installs on the frame of your toad so you can connect the car to your RV with a tow bar. Hook up safety cables between the vehicles to ensure that the toad does not separate from the motorhome if the tow bar becomes detached. Tow bar wiring syncs your vehicle's signal lights with your motorhome's tail lights, as required by law in most states. Finally, the flat tow braking system - also required in most states - activates the brakes in the toad when you hit the brakes in the RV, making for smoother, safer braking, and preventing wear on your motorhome.
9998971 etrailer.com Standard Duty Non Binding Towbar - Motorhome Mounted Towbar - 2" Hitch - 6K Rating
9998974 etrailer.com Tow Bar Adapter for Roadmaster XL and EZ Series Base Plates - Crossbar Style
9998988 Clevis End Kit for etrailer SD Tow Bar
Installation Details
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
etrailer SD Non-Binding Tow Bar for Roadmaster Crossbar-Style Base Plates - RV Mount - 6,000 lbs - e44ZR
Average Customer Rating: 4.7 out of 5 stars (194 Customer Reviews)
This versatile tow bar is easy to use, with arms that support their own weight while you hook up and swing to either side for storage. Integrated safety cables keep your setup streamlined and organized. Built-in rise/drop keeps tow bar level.by: Dave05/27/2022
One word. Fabulous! The SD tow bar is a superior product. I don't want to say bad things about the most popular tow bar out there, but etrailer SD is just better engineering. Watch the video for the product. My Roadmaster base plate was installed by Dave C. Of [company] with great expertise. See the pics
by: Gary09/22/2021
I purchased parts to turn my 2007 Minni Cooper into a toad. After selecting the items I was able to have an initial conversation to verify I had selected the correct parts. I had a few questions along the way and there were a couple pins missing from one item. All these conversations were super helpful and I achieved a perfect install. Thanks to the etrailer team. Best customer service I’ve ever experienced. Especially in the last few years.
by: 07/21/2023
The product worked as it was supposed to Josh at etrailer really help me out I highly recommend him
by: Richard 04/29/2023
We just got it on Wednesday, put it together and tried it out today, seems to work very well. Very easy, even a lawyer could do it!
by: James 02/15/2023
Product was delivered on time and installed easily. This is a high quality product. I Have about 5000 miles of towing since my purchase last year, and it works great.
by: FL rv owner08/21/2022
So much easier to hook up and unhook tow car with this towbar!
by: Nancy 08/16/2022
by: Drew03/13/2022
by: Foster02/23/2024
by: Cheryl06/20/2023
by: Denny11/02/2022
Outstanding product and even better customer service! Two backyard mechanics installed baseplate and braking system with just one call to confirm proper wire connection. Total package works great.
by: Simon Carlton02/06/2024
Good design but poorly manufactured. Used on a single, multi-week trip: Bar stayed on the RV. Removed when we got home and the powder-coating has cracked and bar is showing rust inside and out. Chrome on extending arms is pitted and beginning to rust. Emailed etrailer but Cody informed me that I would have to ship it back at my expense without any commitment to replace! Disappointed with etrailer after years of previous purchases
by: Dennis 03/11/2024
We love our etrailer SD tow bar. Much lighter than our previous Blue Ox. The non binding feature along with the integral safety cables and multiple storage options are great features. We use it in conjunction with a NSA Ready Brake. Great combination. Our current coach is a 2017 Jayco Seneca 37HJ. Toad is a Ford C-Max Hybrid. Easiest to use tow bar we have ever owned.
by: Judy 04/15/2024
This whole system is great!!! Even being a female, it takes less than a minute to connect or disconnect, just a couple of small receivers stick out of the front of the car. And they are removeable when not towing. My brother even bought a set for his Class C. It is difficult to back up in the Class C, IT is ok as it is quick to disconnect, so no worries.
by: Sherri T03/15/2023
Loved this tow bar at first fit the Blue Ox base plate perfectly. Definately the easiest to use of all I have used in the past. But after less than 1 year the telescoping arms are rusting terribly even though we remove it and store inside the garage when not in use also the yellow "clips" to hold it in place for storage have bent. They are not very strong.
by: Tim 10/21/2022
Ordering and shipping was fast and easy. Products arrived in good condition. I haven't installed them yet, but it all looks as advertised. Not my first order with etrailer and the customer service was outstanding as always. Why anyone would order from any place other then etrailer I cannot fathom.
by: Rob 12/13/2022
Unit is heavy duty and well made. Hook up is very easy. There is still some binding during disconnect if not on perfectly level, but much less than my previous setup. I like how the arms stow when not in use. Overall I’m very pleased.
by: Michael02/03/2024
It didn't work with the off-road bumper setup that I was sold
by: Christopher 08/29/2023
Great tow system, does exactly what I needed. The flexibility of how the tow bar folds for use and storage allows me easy access to my bike rack. The tow bars can be stored on either side and fold away easily. I use this on my class C and set it up to pull my Jeep or my Equinox with Roadmaster base plate.
by: Joe07/23/2023
2005 Country Coach Intrigue/ 2021 Jeep Wrangler Rubicon Unlimited
This tow bar works as advertised. We have towed with the unit several times over the last year. Very easy to hook up to the tow vehicle and haven’t had any trouble with binding when disconnecting. The articulation is nice which aids in hooking up and stowing. My only wish is that the telescoping bars would lock in position when stowed. I just run the safety cable through the ends and insert the pins to keep them from telescoping out when in the stowed position.
Self disclosure: We had a little incident. This was 100% our fault. We missed inserting one of the safety pins into the arm that goes into the base plate. While driving I noticed the Jeep wasn’t tracking correctly in the rear view camera. We just happened to be right at an exit of a rest area so I immediately exited and started slowing. While slowing the one arm that was still attached bent absorbing the energy of the Jeep. I believe this saved the Jeep and the RV from any damage whatsoever. The safety cables did their job very well! So, I whole heartily recommend this product for quality and safety!!! So much so we ordered this same unit as a replacement. I tried to upload photos of the bent arm, but keep getting upload unsuccessful.
by: Matthew 09/13/2023
Great purchase and suggestion from etrailer. This thing is so easy to hook up to the Jeep and we couldn't be happier. We've only towed a few times, but already the wife has taken over hooking up the tow bar while I hook up the Brake Buddy in the Jeep. Easy to hook up, just as easy to disconnect after you arrive. I wish we had done this years ago!
by: John03/22/2024
easy to install flat tow by motorhome
by: Timothy02/15/2024
Works pretty well, but starting to get some rust after less than 1 year. Not the quality I would expect from etrailer.
by: Michael08/13/2022
I love this townar is is so quick and simple to hook up..
I would highly recommend this product
by: Jon E.07/15/2023
Ordered this tow bar for blue Ox Plates and it was missing the 1/2" attaching pins to connect to the toad. Called customer support and they insisted the pins should have been there, but finally, said they would send 2 replacements. Waited for 10 days and they sent the wrong item. I'll just have to get the pins myself as etrailer were not able to fix their issue and I really don't want to spend another hour on the phone trying to get them to understand such a simple thing.
25
194
Show More Reviews
See what our Experts say about this etrailer Tow Bar
- Replacement Crossbars for etrailer SD Tow Bar for Roadmaster Crossbar-Style Base PlatesWe sure do! The etrailer Replacement Tow Bar Adapter # e98974 is the piece that you're looking for on your etrailer SD Non-Binding Tow Bar # e44ZR. As long as your tow bar was sitting away from this piece when it was damaged then you're good to go - otherwise I would double check the operation of the tow bar just to make sure it's in good shape.
view full answer... - Tow Bar Recommendation for Crossbar-Style Roadmaster Base Plate KitI recommend going with the etrailer SD Non-Binding Tow Bar # e44ZR because of the latch levers and the adjustability of the head part of the system. This not only makes using the bar easier but it also means you might not need to use a high-low adapter. This tow bar comes with the Crossbar # e98974 to match the Roadmaster crossbar style base plate kit you're currently using.
view full answer... - Roadmaster Sterling Tow Bar Replacement RecommendationsIf you really like the Sterling style and you'd rather stick with that then we have the Roadmaster Sterling All-Terrain Tow Bar # RM-576 you can use. For an upgraded design to the operation of the tow bar I recommend our SD line of tow bars. If you have a Crossbar Style Roadmaster Base Plate then you need part # e44ZR, but if you have the Direct-Connect Style then you need part # e74ZR instead. Attached are some review videos for you to check out. Let me know if you have any questions...
view full answer... - Is The etrailer SD Non-Binding Tow Bar Compatible With Roadmaster EZ Base PlatesYes, the etrailer SD Non-Binding Tow Bar for Roadmaster Crossbar-Style Base Plates, # e44ZR, is compatible with Roadmaster EZ base plates such as the EZ Base Plate Kit, # 521877-1.
view full answer... - Base Plate & Tow Bar For 2018 Toyota 4RunnerI checked with our manufacturers and there is one base plate that fits a 2018 Toyota 4Runner, the Roadmaster Crossbar-Style Base Plate Kit # 1185-1. Your 4Runner must have tow hooks, and the base plate won't fit Limited or Nightshade Special Edition models, or models with Kinetic Dynamic Suspension. An accompanying tow bar that will work with these base plates is the etrailer SD Non-Binding Tow Bar for Roadmaster Crossbar-Style Base Plates # e44ZR.
view full answer... - Parts Needed to Adapt etrailer SD Tow Bars to a Roadmaster Base Plate for a 2011 Mini CooperTo get the etrailer SD Non-Binding Tow Bar # e34ZR to fit the base plates for your 2011 Mini Cooper, you're just going to need # e74ZR if the base plates are direct connect or # e44ZR if they're crossbar style.
view full answer... - Recommended Tow Bar for Roadmaster Direct-Connect Base Plate on 2022 Jeep Grand Cherokee L For your 2022 Jeep Grand Cherokee L with the Roadmaster Direct-Connect Base Plate Kit, # RM77ZR installed, I recommend the Roadmaster Falcon All Terrain, Non-Binding Tow Bar, # RM-522. The hassle-free latches on this tow bar let you easily release your Jeep, even at a hard angle or on unlevel ground. It is a stainless steel construction with telescoping arms and large hookup radius that make connecting very easy. It folds up to store on your RV. The arms will connect directly to the base...
view full answer... - Can The Roadmaster EZ-2 Base Plates Work With The etrailer SD Non-Binding Tow Bars?Yes, the etrailer SD Non-Binding Tow Bar for Roadmaster Crossbar-Style Base Plates # e44ZR will work great with the Roadmaster Crossbar-Style Base Plate Kit # 522013-1A that you have for your Fiat 500. These two items are compatible without the use of an adapter as well.
view full answer... - Does etrailer SD Tow Bar e44ZR Work with Roadmaster Base Plate RM-524448-4Yes, the etrailer SD non-binding tow bar # e44ZR that you referenced is compatible with the base plate kit you have # RM-524448-4.
view full answer... - How To Know If You Need A High/Low Adapter To Flat Tow Your 2022 GMC Canyon If you're flat towing your 2022 GMC Canyon then you'll want to ensure that your tow bar is level between the Canyon and the motorhome. You'll have a 3" "safe zone" from level with a motorhome-mounted tow bar (pictured below). If you fall outside of the 3" safe zone then you'll need to measure the hitch height and baseplate height. You'll measure from the center of the motorhome trailer hitch to the ground for the hitch height and from the ground to the center of the baseplate tabs for...
view full answer...
- Compatible Tow Bar For Roadmaster Crossbar-Style Baseplate # 1424-1I don't have a 2" replacement coupler for your Duncan Towmatic tow bar, but your options for a replacement tow bar are pretty open. You can use the Roadmaster StowMaster Tow Bar # RM-501 if you want to stick with a coupler style tow bar. If you'd rather switch to a receiver mount style you can use the etrailer SD Non-Binding Tow Bar for Roadmaster Crossbar-Style Base Plates # e44ZR.
view full answer... - Does the Bar on the etrailer SD Tow Bar Connect to the Base Plate for a 2016 Jeep Patriot?The bar at the end of the etrailer SD Non-Binding Tow Bar item # e44ZR will attach to the arms on the Roadmaster Crossbar-Style Base Plate Kit item # 521441-1. This is a crossbar style base plate kit which has removable arms that attach to the bar on the etrailer tow bar. You definitely need to use the bar.
view full answer... - Recommended Flat Towing Components For A 1975 Chevy Truck For a 1975 Chevy truck you'll need the following components: Baseplate: Roadmaster Crossbar-Style Base Plate Kit # 122-1. Tow Bar: etrailer SD Non-Binding Tow Bar for Roadmaster Crossbar-Style Base Plates # e44ZR. This tow bar comes with safety cables attached to the arms so you won't have to buy them separately or worry about them dragging on the ground. If you need a higher capacity than 6K then you'll want the 10,500lb capacity # e64ZR instead. Tow Bar Wiring Kit: Heavy Duty Magnetic...
view full answer... - Does The etrailer SD Tow Bar Fit A 1996 Jeep Wrangler The etrailer SD Non-Binding Tow Bar for Roadmaster Crossbar-Style Base Plates # e44ZR is designed to connect to Roadmaster crossbar-style baseplates. You would need the Roadmaster Crossbar-Style Base Plate Kit # 1415-1 (U-Channel Bumper) or # RM-521424-4 (Unlimited, Rubicon & double tube bumper) in order to connect the tow bar to your 1996 Jeep Wrangler.
view full answer... - Safety Cable Length For Included Cables With etrailer # e44ZR Tow BarThe Roadmaster # RM-521424-4 crossbar-style base plate is an EZ4 Series, so it will connect with the etrailer # E44ZR tow bar. Regarding the safety cables included in the etrailer tow bar; they measure 54-1/2" in legnth. The snap hooks measure 4" each. From the picture it looks like they are just the right length with a little to spare on each end. If you were looking for something longer you could use the Roadmaster # RM-646 cables that measure 64" each.
view full answer... - Recommended Baseplate For A 1979 Chevy C10 StepsideLooking at Roadmaster's fitguide the only option is the Roadmaster Crossbar-Style Base Plate Kit # 122-1, with the stipulation that it's 2 Wheel Drive and excluding Diesel and 5.7L Engine models. There currently isn't an adapter to go from a Roadmaster baseplate to a Ready Brute tow bar so you would need to also get a compatible tow bar, like the etrailer SD Non-Binding Tow Bar # e44ZR. This tow bar is going to also come with safety cables so you won't have to purchase them separately....
view full answer... - Recommended Flat Towing Equipment For A 2017 Hyundai Veloster To flat tow your 2017 Hyundai Veloster you would need a tow bar, base plate, tow bar wiring, braking system, and safety cables. You'll also need to refer to your owner's manual to ensure that your vehicle is able to be flat towed and follow any preparation steps it has listed to safely tow your vehicle. I have the following recommendations for you below: Tow Bar: etrailer SD Non-Binding Tow Bar for Roadmaster Crossbar-Style Base Plates - 2" RV Mount - 6K # e44ZR. This tow bar features...
view full answer... - Is The Etrailer Tow Bar Item # e44ZR Compatible With Base Plate Item # 1528-3 On A 2001 Honda CRVFor your 2001 Honda CRV, the Roadmaster Crossbar-Style Base Plate Kit # 1528-3 is compatible with the etrailer SD Non-Binding Tow Bar Item # e44ZR. To complete your flat tow set up I recommend the following items: The Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit Item # RM-15267. This kit allows the light functions from the motor home to be transfered to the factory taillights on the vehicle. The diodes protect the factory wiring from back feed if there is ever a short. The...
view full answer... - Recommended Flat Towing Equipment For A 2001 Honda CR-V AWDYes, your 2001 Honda CR-V can be flat towed. To do so you'll need a tow bar, base plate, tow bar wiring kit, braking system, and safety cables. I have the following recommendations for you below: Tow Bar: etrailer SD Non-Binding Tow Bar for Roadmaster Crossbar-Style Base Plates # e44ZR. This tow bar is compatible with the Roadmaster base plate kit I'll reference below without the need of an adapter. It features non-binding latches and telescoping, self-supporting arms to make connecting/disconnecting...
view full answer... - Correct Base Plate & Tow Bar For 2008 Toyota FJ CruiserWe do indeed have both a tow bar and base plates that fit your 2008 Toyota FJ Cruiser; the exact parts you need are the following: - Roadmaster Crossbar-Style Base Plate Kit # 1183-1 - etrailer SD Non-Binding Tow Bar for Roadmaster Crossbar-Style Base Plates # e44ZR Both of these parts will work for your '08 FJ Cruiser, and they are also the best overall value for your vehicle, giving you quality at a more reasonable price than other options/brands. The tow bar even comes with safety...
view full answer... - Complete Flat Towing Set up For 2014 Honda Pilot We can absolutely get you a complete flat towing set up for your 2014 Honda Pilot; and we'll go ahead and call it the best value for your vehicle. I'll go ahead and list out what you'll need: - Base Plate Kit: Roadmaster Crossbar-Style Base Plate Kit # 521568-1 - Tow Bar: etrailer SD Non-Binding Tow Bar for Roadmaster Crossbar-Style Base Plates # e44ZR - Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 - Supplemental Braking System: Brake Buddy Classic...
view full answer... - Recommended Flat Towing Parts for a 2003 Toyota MR2 SpyderWe have all of the parts you will need but we do not sell one big kit. You will want to make sure it has a manual transmission. The automatics can't be flat towed. I have listed everything below that you will need to flat tow your 2003 Toyota MR2 Spyder: Tow Bar and Safety Chains - etrailer SD Non-Binding Tow Bar for Roadmaster Crossbar Base Plates item # e44ZR Base Plate Kit - Roadmaster Crossbar-Style Base Plate Kit item # 1169-1 Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil...
view full answer... - Can 2004 Chrysler Sebring Convertible Be Flat TowedConsidering the fact base plates are made for the 2004 Chrysler Sebring Convertible and it can be flat towed I'm sure they have. However, this can only be done with the five speed manual transaxle model with the gear selector in neutral. If you want to flat tow a 2004 Sebring you will need a base plate kit, tow bar, safety cables, wiring, and a supplemental braking system. I recommend the following: -Roadmaster Crossbar-Style Base Plate Kit # 270-1 -etrailer SD Non-Binding Tow Bar for...
view full answer... - Parts Needed to Flat Tow 2000 Honda AccordAccording to page 294 of the online owner's manual for your 2000 Honda Accord you can tow your vehicle with a tow bar and all 4 wheels on the ground but you'll need to leave your key in Accessory mode and unplug the radio or anything else plugged into that accessory power to prevent your battery from draining. If you have a manual transmission you need to take the parking brake off and shift into neutral but if you have an automatic you need to release the parking brake, start the engine,...
view full answer...
Do you have a question about this Tow Bar?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Video by:
Joshua S
Video by:
Dustin K
Video Edited:
Jacob T
Updated by:
Wilson B
Updated by:
Noah M
Updated by:
Amanda K
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Bradley B
Written by:
Kristina F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Dave
5/28/2023
We love the SD tow bar. With months of experience we can say its great.