bing tracking image
  1. Trailer Hitch
  2. etrailer
  3. Class III
  4. 2 Inch Hitch
  5. 3500 lbs GTW
  6. Visible Cross Tube
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"

etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"

Item # e98864
lowest price pledge
Our Price: $140.48
You Save: $65.20
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 34 lbs
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Product Expert Kathleen M

Is this right For you? Product Expert Kathleen M says:

Yes, if you:

  • Like that the matte finish blends in with your bumper and offers the added bonus of better rust protection than competitors
  • Haul a trailer that is pretty tall or heavy for your RAV4 and need sway control to keep it from swaying
  • Plan to install this by yourself - because this is only about 35 lbs, it's one of the easiest to lift into place

No, if you:

  • Have a steep driveway where a bike rack or cargo carrier might scrape the ground
  • Don't have the patience to correct a possibly bent bracket - a common issue with this hitch
  • Might get annoyed by seeing the cross tube every time you look at the back of your RAV4
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look. Lowest Prices for the best trailer hitch from etrailer. etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" part number e98864 can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (1027)
  • Q & A (0)
  • Photos
  • Why etrailer?

etrailer Trailer Hitch - e98864

  • Class III
  • 2 Inch Hitch
  • 3500 lbs GTW
  • etrailer
  • Visible Cross Tube
  • 525 lbs TW
  • 4000 lbs WD GTW
  • Custom Fit Hitch
  • 525 lbs WD TW

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.


  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer
  • Matte black powder coat finish over protective base coat offers superior rust resistance
  • Stylish, round-tube design
  • Ball mount, pin and clip sold separately
  • Made in the USA
    • Mounting hardware may be imported


  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 3,500 lbs
      • Maximum GTW when used with weight distribution: 4,000 lbs
    • Maximum tongue weight: 525 lbs
      • Maximum TW when used with weight distribution: 525 lbs
  • Limited lifetime warranty

Rugged, Matte Black Finish

The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.

Matte Carbide Finish vs Glossy Finish

Matte Carbide Finish vs Glossy Finish

etrailer Technical Support

At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

e98864 etrailer Class 3 Trailer Hitch Receiver - 2" - Matte Black Carbide

Installation Details E98864 Installation instructions

This Product Fits The Following Vehicles

Customer Reviews

etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" - e98864

Average Customer Rating:  4.7 out of 5 stars   (1027 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.

2018 Toyota RAV4

Excellent product. I am a 68 year old woman with no jack and I installed the hitch by myself. So don't be scared, you can do this. Took me a few minutes, blocked it up and then installed with a torque wrench and also installed the bracket for the wiring connector. The wiring was pretty easy also. I did watch videos. They were great.

Great quality and price
Debby - 06/02/2022


Timely delivery. Almost lined up perfectly with the factory mounting holes. However, I had to remove about 1/16 in of metal with a power reamer from the right rear bolt hole to allow the bolt to engage the threads properly. The hitch is very robust and it's capacity exceeds the weight and towing limits of my vehicle (2012 Rav 4). Overall I am pleased with the unit and will continue purchasing products from this company

Thank you for your review. It sounds like your hitch was a little flexed. I am glad it worked out but here is more info about flex:
-- Etrailer Expert Sierra K - 06/16/2021
The only thing Ive done with the hitch so for is to mount my bicycle rack. I did wire up the harness for the lights found that it took longer than installing the hitch.
John - 06/15/2022


Great receiver hitch. Was able to install by oneself with the rear of the Rav up on wheel ramps and with the help of a 2 x 8 and car jack. Did have one glitch however. Had to use a prybar to line up holes on exhaust side not a big deal. Overall very happy with end result.


Very satisfied. Nice finish. Came undamaged. Perfect fit for my 2011 RAV4. Good instructions. No cutting or alterations required, other than unbolting and removing left rear tow hook, which is to be replaced by left mounting point of receiver. Was able to do alone, with help of a cooler to support opposite side as I secured first bolt. Be sure you have an 8” plus extension for your socket to give room for ratchet and torque wrench. Also, a ratchet strap should be used to support exhaust, which must be slipped off of hanger to gain access to right side bolts.

Hitch still works great. The finish still looks good after one year in Minnesota.
David - 09/22/2021

2011 Toyota RAV4

It's on the car, I like it, and I'm not sending it back. That's the good part. The not so good? Like so many people say, the holes didn't line up, and I had to work through it. etrailer says if it's bent, and the holes don't match, you can bend it to fit. I needed only about 4mm. I was willing to try. I started with boards and a jack. Sure enough, I could push the arms apart pretty easily. But as soon as I relaxed the jack, they went back to their un-fitting shape. I tried again, pushing further. Still the same. That steel is dang strong. Next I tried the angled-boards-and-sledge technique. Same result: I could spread the arms, but they wouldn't stay spread. I tried wedging in an open stairway, but quickly realized the hitch was stronger than the stairs. I tried prying it under the car, but my pry bar couldn't find anything solid to push against. The gas tank? Not on your Nelly. I tried other things, trying to stay patient, no success.

So how did I get it on? If I couldn't move the hitch to make it the right shape, I needed to move the holes. Chainsaw round-file to the rescue. It took only about 10 minutes to make each of the two rear-most holes a few millimeters longer. Then under the car once more and -click- onto the frame. Done. Only three hours. Success... I guess.

Note: once I started filing I realized the back two holes are farther from the edge of the steel than the front two holes. 10mm vs 7mm to be precise. When I finished filing, they were more like 8mm vs 7mm. That made all the difference. I assume etrailer has a reason for spacing the holes this way but in my case it would have been better if they had just made all four holes 7mm from the edge.

It's done. I ain't complaining. Just glad I had round files and my brain didn't take more than a couple hours to figure out a workable solution.

I really enjoyed reading your review. I am sorry that you went through so much trouble for what is called, flexed hitch. Here is a whole help article about it:
-- Etrailer Expert Sierra K - 07/21/2022


Etrailer has great service and great products. I have bought several receivers from them. This one had some reviews saying it could come bent and the mounting holes would not line up until you bent it back to widen the spread.

I thought “no way” that thing is too beefy to show up bent. I was wrong. It showed up bent. I decided that since I will have only about 200 pound max of bikes on there, I slotted the holes on the drivers side and it easily mounted right up. It’s 1/4” plate, so I’m sure there is no structural loss for the load I plan to carry.

For the price, it’s a great product.

Thank you for your review! What sounds like is happening is that the hitch may have become flexed in shipping. We have a help article that I linked below for future reference. It talks about a few difference ways to straighten out a flexed or bent hitch.
-- Etrailer Expert Brooke M - 09/15/2021

2017 Toyota RAV4

Me gusto el equipo, es resistente, perfecto en su fabricación y la pintura lo hace pasar desapercibido. Su tamaño es genial, perfecto. Mi Rav4 2017 Luce genial con esa nueva pieza, lista para llevarme con mis bicicletas a las montañas de Pensilvania

by: 04/15/2021
2016 Toyota RAV4

Unfortunately did not fit my 2016 Toyota Rav4 hybrid. Wasted too much time and ruined my plans for the weekend.
Hitch was overall too narrow (by 1/2 inch) for vehicle frame.
Perhaps faulty product or slightly bent? Regardless, the bolt holes on both sides didn’t have adequate room, see photos.
Will return for refund.

I have experience working on USAF aircraft, so it would have been an easy install had the hitch fit properly.

Hi Nathan, Thank you for your feedback! This hitch is a confirmed fit for your vehicle. Trailer hitch receivers can flex during shipping due to the ears of the hitch being made out of mild steel. The mild steel is used to help absorb vibrations from the trailer to the tow vehicle. The ears can be flexed back into shape without compromising the hitch. I have attached a helpful article that goes into detail of how to flex the hitch back into shape.
-- Etrailer Expert Tyler M - 04/19/2021
Thank you for your review. It sounds like your hitch receiver was slightly flexed. Here is more info about it:
-- Etrailer Expert Sierra K - 07/06/2021

2015 Toyota RAV4

Great product and very sturdy! Was a bit small when we received it but I wedged the end up under a fire hydrant and bent it into place. Wasn’t too difficult and it fit very snug. Make sure you have a vise or way to bend this thing back into position.

The mount is still working great! We towed a trailer close to my RAV 4 towing capacity from California to Kansas. I am still very pleased with my purchase.
Jeffrey - 07/17/2022


Great instructions, great quality of product, fit perfectly with no need to tweek anything (which can be needed after shipping). Took about an hour to install - you will need a helping hand for a bit to get it into place.

My wiring harness was running late but e-trailer notified me right away and split up the shipping so I could at least get the hitch installed. Super impressed by the customer service.

2017 Toyota RAV4

The hitch arrived quickly and packaged well. The video for my vehicle was spot on. I didn't have anyone to help so I put it on an ice chest and it rolled right under my car. My only problem is that it was about 1/4" too narrow to fit the car's frame. I cut a 2x4 piece of wood to the size I needed and hammered it into the hitch to spread it to fit. This made me a little uneasy but worked out okay. My Yakima bike rack fits great.

It sounds like your hitch receiver was a little flexed and what you did to fix it is perfectly fine. Hitch receivers are meant to flex with the vehicle. Here are more tips on how to fix a flexed hitch:
-- Etrailer Expert Sierra K - 05/05/2022

2022 Hyundai Tucson

Easy assembly, looks great!

Its my
mom's car 2016 Rav 4. I bought it and installed it for her. DIY in less than 30 minutes.

2018 Toyota RAV4

I just had the hitch installed on my RAV4 and it couldn't have been an easier process. Ordering and arrival of my purchase was easy and quick. I have already put my bike rack on and everything is working well. I would highly recommend!


I did not have an extra set of hands to install the hitch. So I used a little DIY ingenuity to prop up the hitch and line up the holes. Sounds simple but it wasn't. The holes did not line up perfectly but I was able to wedge a pry bar to line up the bolts and screw them in by hand then I used my driver and tightened the bolts up without stripping any bolt or hole. The hitch construction looks great.


very pleased with this heavy duty hitch well constructed and made to easealy install with few tools. hitch is designed to fit your vehicle with little to no disasembley of vehicle parts.

2021 Aston Martin DB11

This was a pretty straight forward installation. The bolt holes lined right up for the most part. The holes closest to the actual hitch receiver were a little tight (not spread far enough apart from each other). I used one of the bolts that came out of the factory rear tow out point in one of these mounting holes to overcome the alignment problem. Other than that - I am completely satisfied with this Hitch.

2010 Toyota RAV4

We have only used this to attach a bike rack to our car--I'm pretty sure we are underutilizing it and so can't give a reasonable review. 5 stars because of buyer experience. Our mechanic told us attaching to our 2010 RAV4 was trivial. We haven't had any troubles.

Toyota RAV4

This works well for my Rav4. I installed this to use a hitch bike rack. This rack hasn’t shown any signs of rust/wear or tear after a year.

2013 Toyota RAV4

Perfect for a 2013 Rav4! This hitch looks solid and is very well made. Installation is simple and instructions spot on. On older vehicles be sure to chase the threads on the frame. In this case a 12mm/1.25 tap worked perfectly.
Only issue, as often mentioned, was bent ends during shipping. These were easily bent back out with the cars jack and various woods lengths.


I bought 2 hitches from etrailer and one of these rubber covers for each one. I love them! They fit perfectly and look great. Don’t mind advertising for etrailer as well, because I’m very satisfied with their products.


I'm happy with this product and etrailer's support of the installation process. Watch all the installation vidoes, and read the negative reviews to understand some of the finer points of the install process. The provided bolts *do* work, but they are an *exact* fit (need to be exactly aligned to get them to seat) and don't ignore the "clean out the holes" step - too bad the vehicle OEM doesn't seal the unused holes - mine had 5 yrs of grime that needed to be cleaned out. I was also happy that I had access to a lift to help with the installation - it would have been tough to do from the floor lying on my back.

We do have a great FAQ on cleaning out the bolt holes before installing a hitch.
-- Etrailer Expert Jenny N - 01/25/2022


The hole for the ball mount is a loose fit and it seems that it is a little oversized. The ball mount fits fine in my other hitch receiver on my other truck. Loose fit lots of noise when stopping and starting(clunk-clunk)

You can use the Anti-Rattle Trailer Hitch Receiver Lock for 2 Hitches - 3-12 Span Part # 63232
Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches - 3-1/2" Span
to help reduce the noise.
-- Etrailer Expert Thomas M - 01/23/2022


Hitch arrived 3 days sooner than expected. Nice job by etrailer fulfilling the order.
Package in fine condition with no marring of the hitch.
Easy install in about 30 minutes.
Etrailer has been very, very good to me over the years.


Both the harness and the hitch worked exactly as specified and are doing a fine job on our 2018 RAV-4. EHitch is to the trailering situation as Crutchfield is to Home and Auto audio.

2008 Toyota RAV4

Very satisfied overall. Shipped within a few hours of placing the order. Excellent email communication from order placement, shipping, and after receiving the hitch. Received updates from real people, and not the typical unattended do-not-reply email address. Nice looking, heavy duty etrailer branded hitch with super-tough matte black finish. Straightforward to install by myself using existing factory attachment points. I recommend the eTrailer branded hitch, and I will definitely plan to purchase from etrailer again in the future.

Show More Reviews

See what our Experts say about this etrailer Trailer Hitch

  • Does Hitch E98864 Fit 2009 Toyota RAV4
    For your 2009 Toyota RAV4 the hitch part # E98864 that you referenced is a confirmed fit. From the top of the hitch opening to the ground will measure 13 inches and then from the center of the hitch pin hole out to the furthest edge of the rear bumper measures 7-1/2 inches. If you need more specific dimensions let me know, but if you are looking for dimensions to confirm fit you should know that we guarantee this fits your vehicle and would not require you to measure first...
    view full answer...
  • Does Hitch # E98864 Fit 2018 Toyota RAV4 Hybrid and Allow Handsfree Liftgate
    For the etrailer hitch part # E98864 that you referenced it's going to block a portion of the liftgate sensor of your 2018 Toyota Hybrid but what you can do is kick your foot to either side of the hitch tube and the liftgate will open like normal. I attached an install video for this hitch for you to check out as well.
    view full answer...
    Image 1 for
  • Troubleshooting Difficult to Install Hitch Bolts on 2008 Toyota RAV4
    Before we determine that you have the wrong size install bolts you need to make sure that the bolts not fitting isn't due to the weld nuts of your vehicle being dirty/corroded and that is why they won't fit. Typically on vehicles that have seen a few winters the weldnuts can be a bit dirty/corroded so bolts will not just thread right into them. Check out the links I attached that detail how to clean the weld nuts. We see this pretty often and it's always just dirty weld nuts.
    view full answer...
  • Will Trailer Hitch Installed on 2018 Toyota RAV4 Affect Hands Free Liftgate Sensors
    In regards to the hands free sensor of your 2018 Toyota RAV4 the hitches we offer like the # e98864 will limit the functionality of them. You will most likely be able to kick your foot to either side of the hitch for the function to still work but in some cases you may lose the entire function.
    view full answer...
  • What Years Will the etrailer Hitch e98864 for a Toyota RAV4 Fit
    The etrailer Trailer Hitch Receiver part # e98864 is a fit for a 2006 - 2018 Toyota RAV4.
    view full answer...
  • Is the etrailer Hitch a Fit for a 2016 Toyota RAV4 Hybrid XLE
    The etrailer Trailer Hitch Receiver part # e98864 is a confirmed fit for a 2016 Toyota RAV4 Hybrid XLE. It's a great bolt-on option with no drilling or welding required. It comes with everything needed for installation except common hand tools.
    view full answer...
  • Does etrailer Hitch e98864 Fit 2010 Toyota RAV4
    As long as your 2010 Toyota RAV4 is a USA market model the etrailer hitch # e98864 is a confirmed fit. I attached install videos for the hitch on a 2008 and a 2012 to show that it fits your generation of vehicle.
    view full answer...
  • Recommended Trailer Hitch With Least Amount of Modifications for 2017 Toyota RAV4
    If you are looking for a trailer hitch with the least amount of modifications for a 2017 Toyota RAV4 then I recommend the etrailer Trailer Hitch Receiver part # e98864. There will be no drilling at all or trimming of the bumper fascia. There will however be trimming of an underbody panel if present which is behind the wheel wheel but this is unavoidable for a trailer hitch.
    view full answer...
  • What Vehicles Does the etrailer Trailer Hitch Receiver e98864 for a Toyota Rav4 Fit
    The etrailer Trailer Hitch Receiver part # e98864 is listed as a fit for a 2006 - 2018 Toyota RAV4. Generally speaking, trailer hitches are not cross-compatible with other makes/models unless they use the same chassis. Most trailer hitches are custom fit products.
    view full answer...
  • Bolts Wont Thread On etrailer Hitch for 2013 Toyota RAV4
    The etrailer Trailer Hitch Receiver part # e98864 which is a fit for a 2013 Toyota RAV4 comes with M12-1.25x35mm hex bolts. These will match up with the weld nuts in the frame. If the vehicle is older, the chances of the weld nuts being dirty is high. They can usually be cleaned out with a wire brush and lube but sometimes they require tapping with a thread tap. The vehicle uses four of the same size bolts so I don't think you got the wrong size. Unfortunately, hitches get bent during...
    view full answer...
  • Bolt Size Of etrailer Trailer Hitch Receiver e98864 For 2018 Toyota RAV4
    Yes, the bolts of the etrailer Trailer Hitch Receiver # e98864 are M12-1.25 x 35mm bolts. So for a thread tap you will just need a 12 mm x 1.25 tap.
    view full answer...
  • Can Trailer Hitch be Installed on 2017 Toyota RAV4 Hybrid
    According to the online owner's manual for the 2017 Toyota RAV4, Toyota does not recommend installing a trailer hitch on the RAV4 only if it is the SE model. This particular model vehicle is simply not designed to tow even a light trailer or support the weight of any hitch mounted accessory like a bike rack or cargo carrier. I do recommend verifying this information in your copy of the owner's manual. If you don't have the SE model, then the owner's manual does not list any restrictions...
    view full answer...
  • Could Thule Range Bike Rack Fit 2017 Toyota RAV4 and 2009 Honda Pilot
    We can ship to Canada, I attached a link to our shipping page for you to check out. As long as you have a 2 inch hitch on your 2009 Honda Pilot and 2017 Toyota RAV4 the Thule Range 4 bike rack part # TH9057 will fit and work well. The Pilot has a factory 2 inch hitch on it already but for the 2017 Rav4 you'd want the # e98864 if you needed a hitch.
    view full answer...
  • USA Made Trailer Hitch that Fits 2009 Toyota RAV4
    The Draw Tite part # 75235 that you referenced does fit your 2009 Toyota RAV4 and is built in Mexico. For a US made hitch that fits your vehicle we have the etrailer hitch part # E98864. I attached an install video for this hitch for you to check out as well.
    view full answer...
  • Trailer Wiring Recommendation for 2018 Toyota RAV4 Adventure
    Sounds like they checked your 2018 Toyota RAV4 Adventure thoroughly for trailer wiring connections and none were found. This isn't a huge deal though as we have the Tekonsha kit part # 118578 which is a confirmed fit for your vehicle and requires no vehicle wiring splicing so it's a great an easy solution. It installs by plugging inline with the taillight connectors at the rear of your vehicle like the install video link I attached shows. The price for this kit is at the product link...
    view full answer...
  • Difference Between Draw Tite and etrailer Hitches for 2007 Toyota RAV4
    The etrailer hitch # e98864 and the Draw Tite # 75235 are pretty similar in design but the Draw Tite has 3 bolt holes per mounting flange instead of two and has a higher towing weight capacity as well. The Draw Tite is rated for 675 lbs tongue weight and 4,500 lbs trailer weight and the etrailer hitch is rated for 525 lbs tongue weight and 3,500 lbs trailer weight.
    view full answer...
  • Trailer Hitch Recommendation For 2013 Toyota RAV4
    I'm sorry to hear there's an issue with your hitch installation on your 2013 Toyota RAV4, but this doesn't necessarily mean your hitch # e98864 doesn't fit your vehicle (unless your RAV4 is the electric model, in which case you'd need the # 75235 ). Because of their size and shape, sometimes trailer hitches get flexed during shipping or transport. This is due to hitches being crafted from mild steel. This flex can cause the on-center bolt hole spacing to change, meaning it may appear that...
    view full answer...
  • Replacment etrailer Trailer Hitch Receiver Hardware Kit For 2006-2018 Toyota RAV4
    To replace the hardware for your etrailer Trailer Hitch Receiver # e98864 that fits your 2014 Toyota RAV4, you will need to go the Replacement Hardware Kit # RHK. Once there you will type in the hitch number e98864 and select the manufacturer etrailer from the drop down menu. This will get you the replacement bolt and conical tooth washer needed to reinstall the receiver.
    view full answer...
  • Does Appearance Panel Get Reinstalled on 2018 Toyota RAV4 w/ etrailer Trailer Hitch
    Good question, and the panel you are referring to does get reinstalled on your 2018 Toyota RAV4 when installing the etrailer Trailer Hitch Receiver # e98864. You will trim a small section of it (as shown in the cut out below), and the same push pins and nut that were holding it in will be used to reinstall the panel. So just be a bit careful with the push pins when prying them out and after trimming the small section you can put it back on after the # e98864 in fully installed. And in...
    view full answer...
    Image 1 for
  • Trailer Hitch and Wiring Recommendation for 2018 Toyota RAV4
    For your 2018 Toyota RAV4 hybrid we have the hitch part # e98864 that's a confirmed fit and would work well. This a 2 inch hitch with plenty of towing capacity at 3,500 lb trailer weight and 525 lb tongue weight. For trailer wiring you'd then want the # 118578 which is a custom fit harness confirmed to fit your vehicle. I attached an install video for this kit for you to check out as well. Since you wanted to do some towing you might be interested in etrailer ball mount...
    view full answer...
  • Trailer Hitch and Wiring Recommendation for 2018 Toyota RAV4
    For your 2018 Toyota RAV4 the best hitch we offer is the etrailer hitch part # E98864 for towing a small trailer. I recommend it because it has great towing capacities, has a great price, is easy to install, and has a concealed cross tube which makes it less visible. For trailer wiring you'd then want the Tekonsha kit part # 118578. I recommend this kit because this is our most reliable option we have for your vehicle. Since you wanted to do some towing you might be interested in etrailer...
    view full answer...
  • Powder Coat Finish Comparison on Hitches for 2007 Toyota RAV4
    You won't have any difference in the durability of the powder coat between the matte and glossy finishes, but the matte color definitely hides any dings, dirt and scratches better than the glossy finish will. I do know that we've had people who have had issues with the Draw-Tite hitch holding up over time compared to a Curt hitch like the # C13149 , and that's down to Curt's powder coating process being a bit more in depth. In regards to the difference in color between the etrailer #...
    view full answer...
  • What is Weight of Hitch # E98864
    The total weight of the hitch part # E98864 is 34 lbs. For comparison purposes the Class I Curt hitch part # C12108 instead weighs 27 lbs. A 7 lb difference would not make any difference in fuel mileage and since the 2 inch hitch size has more accessories made for it this would be the way to go.
    view full answer...
  • Recommnded Trailer Hitch for Swing-Away Bike Rack On a 2011 Toyota RAV4
    The eTrailer Trailer Hitch Receiver part # e98864 is what I recommend you use on a 2011 Toyota RAV4 to carry a Thule hitch mounted bike rack such as the Thule Vertex Swing-Away part 9031XT. I took a look at the clearances needed for the Thule Vertex Swing-Away and the eTrailer Trailer Hitch Receiver will give you space between the rear spare tire so there won't be any issues. The eTrailer Trailer Hitch Receiver is a bolt-on option that is super easy to install as there are actually only...
    view full answer...

< Previous

Do you have a question about this Trailer Hitch?

  • Why

    At we guarantee:
  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jameson C
Expert Research:
Jameson C
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Kathleen M
Updated by:
Kathleen M
Employee Wilson B
Updated by:
Wilson B
Employee Brent H
Test Fit:
Brent H
Employee Robert C
Test Fit:
Robert C
Employee David F
Test Fit:
David F
Employee Ryan G
Test Fit:
Ryan G
Employee Jonathan Y
Video by:
Jonathan Y
Employee Kristina F
Written by:
Kristina F

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 1-800-940-8924