What Size are the Inner and Outer Tubes and Wall Thickness of TorkLift Camper Tie Downs

Question:

How thick are the square tubing walls for the TLF 2011 and the TLF 3001? What size tubing is used? outside Same questions for the TLF 3001A.

asked by: Darrell

Helpful Expert Reply:

The TorkLift camper tie downs you referenced, # TLF2011 and # TLF3001 will have an outer assembly and an inner assembly. Tie down # TLF3001A will too but it has aluminum components. The measurements will be the same for all of these.

I pulled # TLF2011 to take the measurements. The inner tube is smaller, 1-1/2 inches square with a wall thickness of 3/16 of an inch. The part of the inner tube that you tie the camper off to is 1/4 inch thick.

The outer tube is larger at 2 inches square with a wall thickness of 3/16 of an inch. The bracket that attaches to the truck though is a little more than 5/16 of an inch thick.

helpful expert reply by: Michael H