Question:
I need to know the dimension from the bottom of the flange to the center of the ball of item # 19258. OR: which ball mount would you recommend for my application? Center of the ball on my trailer needs to be 16inch from the ground. I just Installed my new #C12343 hitch on my 2011 Camry. The top of the receiver is approximately 12 from the ground. Which ball mount do I need? Thanks.
asked by: Mel F
Expert Reply:
I attached an FAQ article to the right on how to pick out the correct rise/drop ball mount for a towing setup so that a trailer can be towed level. But based on the two dimensions you gave me you will need a ball mount with a 4 inch rise. For that you would want the part # 3594.
As long as your trailer coupler takes a 2 inch ball the # 19258 would work well with the # 3594 so that your trailer can be towed level.
Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
