bing tracking image
Q & A Icon

Replacement LM67048 Bearing for a Trailer Hub

Question:

I am looking for a bearing kit with bearings and seals for my trailer. I just took apart the spindle and this is what i found: Bearing LM67048 I.D. 1.25inch O.D. 2.125 Bearing 25577 TYSON I.D. 1.75inch O.D. 2.875 Seal 2941148 NATIONAL I.D. 2.00inch O.D. 3.375 There were no races on the spindle that I took off. Should there be races along with the bearings? I am looking to find which bearing kit you sell that would fit these specifications. Thanks,

0

Expert Reply:

You have an interesting combination of bearings on your trailer hub. We carry the # LM67048 bearing, but the other bearing we don't so you would have to source it elsewhere. I searched the number online and was able to find a couple places that had it.

For a seal I believe the # GS-2125DL would work since it is very close in dimensions to what you listed. The inner diameter is 2.125 so it is a tiny bit bigger than what you said you have. To verify that it will fit you will need to use a digital or dial caliper to verify the outer diameter of the spindle where the seal rides. The outer diameter of this seal is 3.376 so it will fit in that regard.

The races should be still in the hub.

click to enlarge
expert reply by:
0
Jameson C

Products Referenced in This Question


Product Page this Question was Asked From


Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>