bing tracking image
Q & A Icon

What Size Bolts Used With Draw-Tite Class III # 75270 Trailer Hitch on 2009 Honda Odyssey

Question:

What size Diameter, length and pitch bolt is supplied with this kit.

0

Expert Reply:

The Draw-Tite Class III hitch you referred to, part # 75270 uses Class 8.8 M12x35mm bolts with a 1.25 thread pitch. The bolts would fasten to the weld nuts that are welded to the inside of the frame members.

When you install the hitch, take some time to remove any dirt, grime and road boogers from the threads of the weld nuts. I'll link you to an install video.

If you'll be towing with your hitch, you might also need the following to complete your towing system:

Trailer wiring harness with 4-pole connector, part # 118438
Ball mount, part # 2753
1-7/8 inch trailer ball, part # 19261
2 inch trailer ball, part # 63845

expert reply by:
0
Mike L

Products Referenced in This Question





Product Page this Question was Asked From


Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>