Replacing Bulbs in Submersible Trailer Lights.
Question:
# ST16RB submergible trailer tail lights. I need to change the bulbs in them. How do I get the lens off
asked by: Frances D
0
Expert Reply:
On the # ST16RB trailer taillight, the lens is first removed by removing the 4 screws holding the lens to the lamp housing. Once the lens is removed, the 2057 bulb is easily removed by pushing the bulb into the socket, and twisting it a 1/4 turn, then pulling straight up.
expert reply by:
Mike L
0
Product Page this Question was Asked From
Optronics Combination Trailer Tail Light - Submersible - 7 Function - Incandescent - Passenger Side
- Trailer Lights
- Tail Lights
- Rear Clearance
- Rear Reflector
- Side Marker
- Side Reflector
- Stop/Turn/Tail
- Rectangle
- Surface Mount
- Submersible Lights
- Incandescent Light
- 8-1/16L x 2-7/8W Inch
- Red
- Optronics
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Correct Replacement Taillight for Trail Star Boat Trailer
- Q&A: What is the Measurement from the Very Bottom of the Shocker Hitch # SHK77MR to the First Pin Hole?
- Q&A: Troubleshooting Lack of 12V Power at 7-Way Trailer Connector on 2019 Ford F-150
- Q&A: How to Activate 12V Trailer Power Circuit on 2017 Ford F-350 Super Duty
- Q&A: Changing the Bulb in the Wesbar Tail Light Capsule
- Q&A: Replacement Tail Lights for Optronics A1STP2 93 on 2005 Trailstar Trailer
- Q&A: Replacement Trailer Taillight Lens with SAE STIAP2 04 DOT DOT Number On It
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Top Gifts for Dads in 2024
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Where to Position the Trailer Axle?
- Article: Trailer Wiring Diagrams
- Article: Trailer Tire Sizing