Recommendation for a Transmission Cooler On a 1992 Dodge B250 Van Towing Landscape Trailers
Question:
I purchased a t-one wiring harness & ball mounts for our 92 Dodge Van B250 5.2 V8 from your company in the past, I am very pleased with your service. We now need the proper cooler, is the derale d13504 a good choice? And is skiping the factory cooler in the lower radiator recommended? We have 95+ degree days in Florida pulling heavy landscape trailers.
asked by: Marc S
Expert Reply:
Yes, the Derale Transmission Coolers for the 1992 Van by Dodge, item # D13504, would be a great choice for cooling your transmission while towing. The only suggestion I would make is that you measure the space available in front of your radiator or a/c condenser to make sure there is space for the install. I am sure there is room on your van but double check to be safe.
The overall dimensions of the # D13504 Transmission Cooler are 11 inches wide by 12 inches tall and 7/8 inches thick.
This cooler is designed to work inline with your factory cooler and I would not recommend by-passing the factory cooler. You can never cool the transmission fluid too much.
Since you are towing heavy loads in a warm humid environment you may also want to install a engine oil cooler. The Derale Stacked-Plate Engine Oil Cooler Kit w/ Spin-On Adapter (3/4-16 Threads) - Class III, item # D15651, will work on your vehicle and allows for relocation of the oil filter to a more accessible location. You will need to measure to make sure there is room for this installation also.
Products Referenced in This Question
Derale Stacked-Plate Engine Oil Cooler Kit w/ Spin-On Adapter (3/4-16 Threads) - Class III
- Engine Oil Coolers
- Stacked-Plate Cooler
- W/ Spin-On Adapter
- Class III
- 13W x 4-9/16T x 2D Inch
- With - 8 AN Inlets
- Derale
more information >
Product Page this Question was Asked From
Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class IV - Efficient
- Transmission Coolers
- Plate-Fin Cooler
- Full-Size Truck
- SUV
- Standard Mount
- 11W x 12T x 7/8D Inch
- With 11/32 Inch Hose Barb Inlets
- Derale
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Transmission Cooler Recommendation for 2008 GMC Yukon XL 5.3 Liter
- Article: Frequently Asked Questions About Transmission Coolers
- Q&A: Should I Run a Sumospring and Firestone Air Bag Kit on 2019 Toyota 4Runner
- Article: Transmission Cooler
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Recommended Transmission Cooler for a 2023 Nissan Pathfinder
- Q&A: Recommended Transmission Cooler for a 2014 Chevy Silverado 1500 with the 4.3L V6 Engine
- Q&A: Recommended Replacement Pin Box for a 2020 Dutchmen Astoria W/ Lippert Rhino Pin Box
- Q&A: Recommended Transmission Cooler For 2007 Chevrolet Tahoe LTZ 2WD
- Article: My Trailer Hitch Doesn't Fit
- Article: Performance Chips and Modules
- Article: Big Truck Big RV