What Size Threads are Ues On SportRack Anti-Rattle Hitch Lock SR0901

Question

Question:

Do you know if this will fit a Bell right up two bike hitch rack model #1005300. If you do not have an answer to this question, can you provide the dimensions of the bolt. I need the thread size so I can compare with the one that came with the rack. Thank you

asked by: Ryan G

0

Expert Reply:

We do not carry the Bell racks, so I could not test to see if it will fit those. However, I pulled the Sport Rack lock from our warehouse to check the threads. The threads are 1/2 inch coarse. The overall length of the bolt is 4 inches, and the threaded portion is 1-3/4 inches.

expert reply by: Patrick B

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Hi Mitch; thank you for providing that information. The cover you have now is the Pace Edwards JackRabbit #311-JRT3554. The correct replacement cover is the #PE39AJ.

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Hey Russell, thanks for reaching out! Sounds like you're needing the etrailer Hitch Receiver Lock for 2" and 2-1/2" Hitches #e98881, which has a keyed alike option on the product page and is made in the USA. Just change the option to…

view full answer...

Answer 5

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 6

Hello Brody, thanks for reaching out. I am happy to recommend a flat tow setup for your Jeep. Can you tell me what model/submodel of Jeep you have? That way I can make sure you get the right base plate and other parts. Let me know if you have any…

view full answer...

Answer 7

I recommend the Anti-Rattle Hitch Lock #SR0901 as it has the same 1/2" - 13 thread pitch that you current bolt has. Included with the hitch lock are 2 keys a washer and lock washer to ensure that it does not loosen on you when it is in your…

view full answer...

Answer 8

There is one threaded hitch lock that we know will work with the Curt 2-Bike Rack #C18085, assuming that is the one that you have. There isn't just a hitch pin available so you would have to go with the threaded lock, and so long as you do have…

view full answer...

Answer 9

The Curt 2 Bike Platform Rack #C18085 comes with the threaded anti-rattle hitch pin, but it does not have a locking option for that rack. There isn't a locking hitch that fits that pin, so I recommend using a cable lock like #CAB-10 or #C23666…

view full answer...

Answer 10

The Thule Hitching Post Pro #TH934XTR was not designed to tilt with bikes loaded as the anti-sway cages that hold the bikes and prevent movement were not designed to support the weight of a tilted bike. Plus the rack would be incredibly heavy as…

view full answer...

Answer 11

You can have your bikes loaded up and still tilt the Kuat NV 2.0 Base 2-Bike Platform Rack - 1-1/4" Hitches #BA12B. I couldn't find where it said in the specs it could not be in the tilted position so I checked with Kuat and as you can see…

view full answer...

Answer 12

Jan, for your Curt Bike Rack #C18064 you can use the Replacement Anti-Rattle Hitch Pin for Curt Bike Racks #C82NR.

view full answer...

What Size Threads are Ues On SportRack Anti-Rattle Hitch Lock SR0901

Product Page this Question was Asked From

Continue Researching