Question:
I have a boat trailer with 10in wheels with a 5 hole pattern on 51/2 in and I can only find 5 on 41/2in
asked by: Dewayne
Expert Reply:
The 5 on 5-1/2 bolt pattern is very rare nowadays. We only have that bolt pattern available in 15 inch wheels # TTW550555WS1.
The most common bolt patterns now for 10 inch wheels will either be a 4 on 4 inch or a 5 on 4-1/2. To use either of these wheels you would have to change the hubs on your trailer. To select the correct hubs I would need to know the inner and outer bearing numbers stamped into the sides of the bearings.
The other option is to replace the axle with a new one. This would have to be done only if there are no hubs that use the bearings required by your spindles.
Taskmaster Steel 8-Spoke Trailer Wheel w/ Offset - 15" x 5" Rim - 5 on 5-1/2 - White
Kenda 4.80-12 Bias Trailer Tire with 12" White Wheel - 4 on 4 - Load Range C
