Installation Instructions for Curt Trailer Hitch 13555 on a 2011 Honda CR-V  

When we installed the Curt Trailer Hitch Receiver #13555 on a 2011 Honda CR-V, we found it has a height of 15-3/4 inches from the top of the receiver to the ground. This is part of the formula you will use to find the correct ball mount, with the…

I attached an FAQ that details how to pick out the correct ball mount for your towing setup with your Kia. Picking out the correct ball mount will allow your trailer to sit as level as possible. Basically you will first measure the height from the…

The Curt hitch part #13555 is a great fit for your 2007 Honda CR-V but I can see why the one you received didn't fit well due to the larger mounting flanges being pretty big. It's pretty common for hitches this size to get bent in…

The Curt Trailer Hitch Receiver part #C12169 for a 2019 Honda CR-V will sit around 13-1/4" off the ground when measuring from the top inside edge of the receiver tube opening. That said, I recommend the Curt Trailer Hitch Receiver part…

In order to determine the correct rise or drop for a ball mount, there are some simple measurements that you can take. We actually have an FAQ on this subject which I have linked for you. Just make sure that when you take the measurements, the…

To determine rise or drop ball mount you'd need, you'll need to make a simple calculation. Measure the distance from the inside top edge of the receiver tube down to the ground, it sounds like you've already done that and came…

If you're speaking of a ball mount that would be used in a 2 inch Class III, IV or a 2-1/2 inch Class V hitch, then yes the ball mount can be used in either the rise or the drop position. With a 1-1/4 inch Class I or II hitch, it'll…

Yes, the Curt Trailer Hitch Receiver part #13555 which is a fit for your 2011 Honda CR-V would be an excellent option for your Allen Sports Deluxe 5-BikeHitch Mounted Bike Rack. The Curt Trailer Hitch Receiver is a custom fit for your CR-V which…

Tightening down the CURT Trailer Hitch, #13555, to the specifications in the instructions, linked for reference, is very important. You do not want to make it too tight or you could contort the hitch or vehicle metal or break a weld nut. Too loose…

I'm assuming you're talking about having the Thule Top Tracks for Roof Racks like part #THTB60. If that's the case then the Thule Eye Bolt Tie-Down Anchors #TH37QC would be a compatible option for you. The eye bolts will screw…

For your Thule WingBar Crossbars you'll want to use the Thule Eye Bolt Tie-Down Anchors #TH37QC which will fit the Thule WingBar, SlideBar, and ProBar Evo.

I pulled this from our warehouse and it was a lot smaller than I originally thought. In the attached picture I have all of the dimensions you requested noted. To give you a quick overview of the dimensions: Thickness - .16 inches Long Sides - .993…