Replacement Grease Seals For TRP GS-1719DL

Question

Question:

a good general purpose grease too use. ?

asked by: David C

1

Helpful Expert Reply:

From the numbers you provided it sounds like you need replacement grease seals. In my research, the grease seals I found with the GS-1719DL number have a 1.72 inside diameter and 2.565 outside diameter.

The replacement double lip grease seals you need are part # RG06-050. There are 2 seals in the package.

When replacing any components for your hub, you will want to make sure you either get the numbers for the parts or take precise measurements with a digital caliper. I have attached a photo that shows where measurements should be taken when measuring and also where the numbers are typically found on bearings, races, and seals.

expert reply by: Jeffrey L

1

click to enlarge

David C.

3/24/2015

a good general purpose grease too use. ?

Reply

Jeffrey L.

3/25/2015

We have a couple of options you can consider when it comes time to pack the bearings with grease. A good grease we offer is the LubriMatic Marine trailer Wheel Bearing Grease, part # L54FR in 3 oz cartridges, then you could use the mini-grease gun 30-800. You may be interested in a bearing packer like part # L70025. This makes packing trailer bearings an easy task. If you want to hand pack the bearings, you can still use the LubriMatic Marine Trailer Wheel Bearing Grease in the cartridges part # L54FR. You can use this without a grease gun.

Reply

John H.

3/29/2020

I got the wheel off the trailer along with the break drum. The outer bearing came off easily. The inner seal did not want to pop out. Instead I inadvertently dislodged a small coiled spring from underneath the seal? Is there a special tool needed to remove the seal without damaging the inside bearing?

Reply

Chris R.

3/31/2020

There's not a special tool to remove that grease seal. Other than being really careful, there's no particular trick to get it out. The honest fact is that the seal is typically broken when removing it because of exactly what you described. When it's inspection time, it's usually about due for a replacement anyway. If you can tell me the number on the seal I'd be happy to recommend the right part if you don't have it already.

Reply

Greg M.

11/25/2020

seal is for a Shorelander boat trailer - designation is TCM174253TB with 1.750"ID and 2.565"OD (approx 9mm wide). Thanks,

Reply

Jon G.

11/26/2020

@GregM Thank you for the dimensions. While we have some seals that match either the ID or the OD we unfortunately don't have a match that fits the specs you gave. I'd try reaching out to ShoreLand'r to see if they have any replacements for you.

Reply

John H.

3/31/2020

Thank you. After re-watching some YouTube videos, I have concluded that I wasnt aggressive enough. I needed a bigger pry bar. I was resigned to having to replace the seals as little as $2.00 each but didnt want to do any damage removing them. I now realize that I should have gotten a crow bar and a bigger hammer. I have learned a lot, thanks in part to your response. This first time I have resigned myself to having them repacked by professionals $300!, but with the hope that they will let me watch so that I can do it myself next time. Im a woodworker, not a mechanic, but I can learn. How often do you recommend repacking wheel bearings? P.S. My seals are #GS1719DL.

Reply

Chris R.

4/1/2020

Take a look at the article I linked below. In it you'll find video demonstrations and additional info specifically about repacking hub bearings. I think you'll get just as much out of it as watching a professional next to you (and for free!). We recommend repacking the bearings once a year. You would need # RG06-050 to replace your GS1719DL seals.

Helpful Links

faq-wheelbearingpack.aspx

Reply

Answer 1

The correct replacement cover for your Ventline Northern Breeze VB0568 Roof Vent is the Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents #BV0554-01 for white, or #BV0554-03 for smoke. I have attached a couple of videos for you to…

view full answer...

Answer 2

There are two different tail light bulbs types on a 2022 Ford Bronco, LED and incandescent. If you have LED then you need the Curt T-Connector Vehicle Wiring Harness part #C42WR or if you have incandescent then you need the Curt T-Connector Vehicle…

view full answer...

Answer 3

The Double Lip Grease Seal part #58846 is indeed the correct replacement for a GS1719 Grease Seal.

view full answer...

Answer 4

Yes, the Bearing Kit for #84 Spindles part #BK2-100 is correct for your Lippert Trailer Idler Hub part 122098. I confirmed this with Lippert for you as well.

view full answer...

Answer 5

Between the 1,400 lb SumoSprings Solo Custom Helper Springs #SS68DR and the 1,800 lb Kit #SS78DR I recommend going with the 1,800 lb kit. These won't affect your daily drive but will offer the support you need when you are going Overlanding. If…

view full answer...

Answer 6

I can definitely help. What I recommend is the SumoSprings #SS68DR. These will level you out and give the extra support you're looking for. They will also help smooth out the ride while towing and minimize sway. SumoSprings also have a minimal…

view full answer...

Answer 7

Of the available choices, I prefer the SumoSprings #SS68DR which would provide up to 1400 lbs of additional support for your rear suspension which would work great to counteract the tongue weight of your travel trailer. Not only will the SumoSprings…

view full answer...

Answer 8

Nope! The SumoSprings Solo Custom Helper Springs - Rear Axle #SS68DR you're looking at are going to work with all models of the 2019 Toyota 4Runner, so it'll work just fine with the KDSS option. These springs at 50 percent, have a 1,400-lbs…

view full answer...

Answer 9

The Firestone Coil-Rite Air Helper Springs #F4135 is the kit that is confirmed to fit the rear suspension on your 2022 Toyota 4Runner TRD Pro with the Fox shock suspension. As this fits into the rear coil springs on your 4Runner there is no need for…

view full answer...

Answer 10

The older generations of the Wesbar submersible low-profile lights came with sealed light bulb capsules that are not replaceable. If your capsule is sealed, then your best option is to replace the lights with new lights like part #403026 and #403076.…

view full answer...

Answer 11

Thanks for reaching out, Ron! To replace the grease seal on your Dexter Trailer Hub & Drum Assembly #84546UC3-EZ (Dexter part K08-247-94) you can either get part #58846 for a single seal or part #RG06-050 for a set of seals. If you've…

view full answer...

Answer 12

Hi Adam, SumoSprings will not affect your unloaded ride height, but are designed to help support your suspension when loaded so that you maintain your factory unloaded ride height. The colors dictate the weight capacity of the spring so black ones…

view full answer...

Replacement Grease Seals For TRP GS-1719DL

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching