Additional Mounting Hole Measurements for Stromberg Carlson Scissor Jacks

Question:

Hi, I need to find out 2 more dimensions in addition to those shown in the picture of the product JSC-24. On that picture from the top of the bracket with the holes and slots in it. I need from the edge to the center of the 2 5/16 holes and again from the top of the bracket to the center line of the horizontal slots. Thanks

asked by: Rick

Expert Reply:

I went out to the warehouse and pulled a scissor jack from set # JSC-24. I took several measurements and included a picture of them for you.

From the near edge to the centerline at the two smaller holes it is 3/4 of an inch.

From the center of the slotted holes to the furthest edge it is 2-1/2 inches and to the nearest edge it is 1-5/16 inches. And from the center to the edge to the left or right it is 1-5/8 inches.