Can Timbren Axle-Less Trailer Suspension Rubber Springs Be Replaced to Increase Weight Rating
Question:
i purchased the A12WS545 for a tear trailer build, and I have noticed alot of compression to the bushing springs, so much in fact, that I believe that I am close to exceeding the weight rating for the bushings. Is it possible to swap out the bushings with a heavier-rated bushing and replace the old one directly?
asked by: Brayden
Expert Reply:
Thank you for your purchase last year of a Timbren Axle-Less Trailer Suspension System with Hubs, part # A12WS545. This system is rated for 1200-lbs overall weight capacity. If you are exceeding the system's capacity you can, according to my contact at Timbren, replace the main compression spring with a heavier-rated unit, part # A00100-55000, which will increase the system's rating to 2000-lbs.
Similar Expert Q&A Pages
- Timbren Axle-Less Suspension for 10,000 Pound Mobile Hydraulic Lift
- Wheel Recommendation for Timbren Axle-Less Trailer Suspension System # A12WS545
- Can I Use Timbren Axle-Less Trailer Suspension System with Hubs on my Boat Trailer
- Dimensions of Timbren Axle-Less Trailer Suspension # A12WS545 For Utility and Motorcycle Trailer
- How Much Clearance Is Needed For Tires When Installing Timbren Axle-Less System Under Trailer
- Replacement Grease Seal for the Timbren Axle Less System part # A12WS545
- Available Weight Capacities for Timbren Axle-Less Trailer Suspension Kits
- Comparing The Timbren Axle-Less Trailer Suspension System To The FlexiRide Half Torsion Axle System
- Is The Timbren Axle-Less Suspension System Equipped For Use On Highway
- Timbren Axle-Less Suspension System for a Tear Drop Trailer Build
- Replacement Hub Assembly for Timbren Axle-Less System # A12WS545
- Timbren Axle-Less System Recommendation for a Tear Style Trailer Towing 500 lbs Max
- Can Built-In Camber be Adjusted on Timbren Axle-Less Trailer Suspension System with Hubs
- How Much Does the Axleless Timbren Suspension System A12WS545 Compress When Loaded
- Is There a Timbren Axle Less Kit Setup that Fits Jeep Wheel Bolt Pattern 5 on 5 inch
- Recommended Axle for a Trailer and Cargo Weighing 800 lbs
- Timbren Axle Less System for 2k Axle Replacement with 5 on 4-1/2 inch Hubs and Off Road Config
- Timbren Axle-Less Trailer Suspension for Utility Trailer
- Timbren Axle Less Kit with Hubs Recommendation for Small Trailer Towed by Chevy Tracker
- Recommended Axle-Less System and Wheel/Tire Combo for a Light Boat Trailer
- Installing Timbren Axle-Less Suspension System on Older Trailer
- Timbren Axle-Less Trailer Suspension and Hubs with 5 on 5 Bolt Pattern
- Will a Kenda 215/60-8 Bias Trailer Tire and Wheel Fit the Timbren Axle-Less System part # A12WS545
- Wall Thickness Recommendation for Square Tubing Support For Timbren Axle-Less Suspension
- Can Metric Studs Be Substituted In Timbren Axle-Less Trailer Suspension System With Hubs
- Would Taskmaster 4.80-12 Tire White Mod Wheel Fit on a Timbren Axle-Less Trailer Suspension System
- Compatibility of Timbren Axle-Less Suspension on Boat Trailer
- Does 1,200 lb Timbren Axle Less System Require Frame Cross Beam