Recommended Trailer Wiring Harness for a 2010 Hyundai Santa Fe with Factory Tow Package

Expert Reply:

For the 2010 Hyundai Santa Fe with the factory tow package, you would need the Custom Vehicle Wiring Harness, part # 118258. The harness would plug into the connector that is located underneath the vehicle inside the lower body panels on the driver side next to the muffler.

I would also recommend a mounting bracket, part # 18144, and it would be a good idea to use dielectric grease like part # 11755 between the connectors. The grease will protect the plugs from moisture and corrosion.

For your convenience, I will include a link below to the install instructions and links to some additional information on wiring for reference.

expert reply by: Mike L

0