Best Way to Determine Weight of a Boat Trailer
Question:
Hello. I am trying to find the weight of a trailer I recently purchased. It is a 1985 Load Rite boat trailer. The model number is 21T-3300S. I have the GVWR and GVWR for all axles. Any help would be appreciated. Thank you!
asked by: Tammy
0
Expert Reply:
The easiest and most reliable way to determine the weight of your trailer would be to take it to a weigh station and have it put on one of the scales.
On the plate of the trailer near the coupler that lists the GVWR this info may be listed there as well.
expert reply by: Jameson C
0
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Similar Expert Q&A Pages
- Recommended Replacement Hub/Drum and Brake Assembly for Typical Dexter 3500 lb Axle
- Correct Replacement for Tru-Ryde Hub/Drum RVD-H-545
- Replacement Hub for AxleTek Hub # BD2-545-17
- How to Determine Trailer Axle Capacity to Find Parts to Add Brakes to Trailer
- Replacement Brake Drums and Brake Assembly Parts for Lance 1685 Travel Trailer
- Replacement Bearings/Seals for Haulmark Model TH85X20WT2 Tandem Axle Enclosed Cargo Trailer
- Pre-Greased Hub/Drum for 3500 lb Spindles on 2018 R Pod 178 and Four Winns D0210S02 Trailer
- Pre-Greased Trailer Hub & Drum That Fits Lippert 3,500 lb Axle
- Replacement Hub and Drum Assembly for Tru-Ryde RVD-H-545
- Recommended Hitch for 2011 Nissan Juke for Towing 2,000 Pound Trailer With Brakes
- Inner Grease Seal Placement On Trailer Electric Brakes
- Recommended 5 on 4-1/2 Hub for 3,500 lbs Axles w/ L68149 Inner Bearing and L44649 Outer Bearing
- How To Find Correct Replacement Bearings and Hub for Magic Tilt Chaparral
- Replacement Double Lip Grease Seal for Kodiak Disc Brake Kit # K2HR35DKG
- Replacement Hub/Drum Assembly and Brake Assembly for 2017 Rockwood Mini Lite Travel Trailer
- Best Way to Pack Trailer Bearings with EZ Lube Spindles
- Do Trailer Hub Seals Get Damaged When Pulling Hub Off to Inspect Brake Assemblies
- Determining Which Replacement Parts Fit Lippert 8000lb Axle
- Determining the Correct Replacement Brake Drums and Hubs for 1967 Forester Camper
- Replacing Lippert 3,500 Pound Axle with 76 Inch Spring Seat Length
- How to Determine What Replacement Hub and Drum Assembly with a 5 on 4-1/2 Bolt Pattern
- Can EZ-Lube Hub and Drums be Used on Non-EZ-Lube Spindles
- Comparing the E-Z Lube Hubs to the Standard Hub Assemblies for Trailer Axles
- Correct Replacement Hub/Drum for 1994 Haulmark Elite 24' Trailer
- Can a Hub/Drum Be Installed on Axle Without Electric Brake Assembly
- Troubleshooting Weak Brakes on 2017 Forest River/Surveyor Model 251RKS Trailer
- Replacement Hubs and Bearings for Hyde Drift Boat Trailer With Dexter Axle
- Trailer bearings and Seals For Lippert 3500 Lb Axle on Jayco Jay Flight
- Parts Needed to Add Brakes to a 3,500 lb Dexter Trailer Axle
- Easiest Place to Measure 5 Lug Trailer Hub to Determine Bolt Pattern