Finding Replacement Wheel Bearings for Log Splitter With a 3/4 Inch Diameter Spindle
Question:
I need to replace bearings in a wheel on a log splitter. I dont have access to calipers but I believe the closest part number to what I need is the Replacement Trailer Hub Bearing - LM11949. It is only a 0.75inch spindle. It appears the race is in good shape so I only need both the inner and outer bearings as well as the seal for the inner side and the flat washer for the outer side. I couldnt find a kit this size so need to know if you carry the seal and/or washer that is compatible with the LM11949?
asked by: Dave S
Expert Reply:
The reason we recommend folks use a digital or dial caliper to measure the bearing ID is because it's essential that the measurement be highly accurate. Using bearings that don't fit perfectly can lead to all kinds of problems.
Typically, a hub will use a different inner and outer bearing, with the inner bearing being larger. To determine which seal is used with a particular bearing, you need to know the outside diameter of the race used with that bearing. The LM11949 uses a LM11910 race with an outside diameter of 1.781 inches. The # CE16305A grease seals have a 1.78 outside diameter and a 1 inch inside diameter. If the surface of the spindle where the grease seal rides is 1 inch in diameter, the CE16305A seal will work for you.
I can confirm this if you can provide the bearing reference number from the inner and outer bearings (if they're different.) I've linked you to an FAQ article that addresses how to replace bearings, seals and races if you're not familiar with the process.
Products Referenced in This Question
CE Smith Grease Seals - 10174VB - Single Lip - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Single Lip
- 1.000 Inch I.D.
- 1.78 Inch O.D.
- CE Smith
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - LM11949
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- .750 Inch I.D.
- Bearing LM11949
- Race LM11910
- 3000 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Trailer Hitch
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2"
- Shop: Draw-Tite Max-E-Loader Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Search Results: l44643
- Shop: Bearing Kit for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Shop: Replacement Trailer Hub Bearing - LM11949
- Shop: Spindle Grease Seal Set for L44643 Inner Bearing and 1.980 Bearing Buddy
- Search Results: 34823 seal
- Shop: Washer For 1" Spindle
- Shop: Replacement Trailer Hub Bearing - L44649
- Video: TruRyde Trailer Bearings Races Seals Caps - Bearings - BK1-100 Review
- Search Results: bk1~100
- Search Results: wheel bearing seal
- Search Results: bt8 spindle
- Search Results: grease
- Q&A: Where to Measure on Trailer Spindles to Determine Replacement Hubs
- Search Results: 4.80 8 tire
- Q&A: Replacement Tire For Log Splitter Trailer With 4.80-8, Load Range B Tires
- Q&A: Replacement Tire for Log Splitter with 4.80/4.00-8 Tire and Solid Steel Rim
- Q&A: Which Grease Seal for LM11949 Bearing and LM11910 Race on Utility Trailer with No-Lug Hub
- Q&A: Removing and Replacing Trailer Spindles
- Q&A: Availability of Hub for LM11949 Bearing
- Q&A: Solution for Replacement Hub on Old Trailer with 3/4" Spindle Diameter