Which Trailer Spindles Will Take CE Smith Pre-Greased Trailer Hub 13110
Question:
Which spindles would fit this hub? I have a British-made little boat trailer, which needed new wheels. I bought the wheels, but the original hub has too skinny bolts. So I bought the hubs. Now the original spindles are too short. I would like to buy the spindles, but I am not sure which would fit. Can you help me?
asked by: Leszek C
0
Expert Reply:
The Pre-Greased trailer hub # CE13110 fits on BT8 spindles such as # TRU94FR. The hub uses inner and outer bearing L44643 and a grease seal with inner diameter of 1.249 inches and outer diameter of 1.983 inches. This is exactly what you would find on a BT8 spindle.
Installing a spindle is a precision job that requires a qualified professional to install/weld onto the trailer. If there is an RV dealer with a service center near you, they could probably do the job.
expert reply by: Michael H
0
Products Referenced in This Question
BT8 Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Trailer Spindles
- Standard Spindle
- 1-1/4 Inch Diameter
- Round
- For 2000 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2500 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- CE Smith
more information >
Similar Expert Q&A Pages
- Recommended Pre-Greased Hub With 1-1/16" Inner And Outer Bearings And 4 On 4 Bolt Pattern
- Replacement Bearings for CE Smith Trailer Hub 13110
- Replacement Hub Compatible With 09067 Outer Bearing
- Replacement Hub For A 1949 Or 1950 TeeNee Boat Trailer With Short Spindles
- Replacement Hub For Dexter Idler Hub Using L44643 Bearings and a 1.250" Inner Diameter Grease Seal
- Correct 4-Lug Trailer Hub for StarCraft Trailer with 2,000 Lb Axle
- Correct 4-Lug Hub and Wheels/Tires for 1 Straight Trailer Spindle
- Will Grease Seal Included With CE Smith Trailer Hub CE13110 Work On Spindle With 1.250 Seal Surface?
- How To Find Correct Replacement Wheels and Hubs for Triton XT10 Enclosed Snowmobile Trailer
- Replacement Hub for Boat Trailer Using L44643 Bearings
- Grease Used in CE Smith Pre-Greased Hub CE13110
- Is Pre-Greased etrailer Idler Hub Suitable for a Boat Trailer
- Compatible Hub for TRU44FR BTR Spindle
- Comparing CE Smith Trailer Hub Assemblies CE13100 and CE13110
- Pre-Greased Hub with 4 on 4 Bolt Pattern and L44643 Bearings Already Installed
- Replacement Hubs for 2006 Aliner Expedition Folding Camper with 2.5K Axle
- Replacement Boat Trailer Hub for 1 Inch Diameter Straight Spindles
- Equivalent Hub Assembly to CE Smith Trailer Hub Assembly # CE13100 with Lug Bolts Built In
- Availability of Trailer Hub to Fit Older Short Spindle on Boat Trailer
- What Spindle Fits CE Smith Trailer Hub # CE13110
- Hub length of CE Smith Trailer 13110 and 13100
- Replacement Trailer Hub Assemblies For A 1976 Valley Forge