Availability of Replacement for Center Mount Jack for Ranger Boat Trailer  

We definitely have some trailer jacks you can use as a replacement for your Dutton-Lainson but it doesn't look like anything we have will work as a direct replacement. If you'd like to stick with the Dutton-Lainson brand then I recommend…

The only trailer jack we can recommend that would fit on the same frame mount as your 2012 Ranger trailer that has a Dutton Lainson jack currently is another DL jack like with the part #DL24MR since all of the jack manufacturers use slightly…

I attached a picture that has the measurements of the mounting holes on the mounting plate of the Dutton Lainson Sidewind jack #DL22339 that you referenced. Basically they are 5-1/2 inches from left to right and then 2-3/8 top to bottom row and then…

Normally the SAE number isn't a reliable way to pick out replacement lenses, but we know that the #A32RB is the correct replacement for a lens marked SAE-A-P2-DOT-02 like what you have. For an all new assembly you'd want the part #MC32RB.

I do have some great replacement options for you but I don't know what this trailer comes with from the factory so the best option we can offer without knowing this is the Fulton Bolt-Thru Swivel Marine Jack part #FXP10 which features a simple…

The most similar jack we have to what you are looking for is the Dutton Lainson #DL22507 which is the same overall setup as the 1,250 jack you have but has a 1,000 lb capacity instead of 1,250. The jack you have is 6814 or 22590 and it's not one…

Here is a Dutton-Lainson Round Swivel Jack #DL22335 it has an extra wide 3 inch wheel so it'll be easy to move around in any terrain and it will swing up to get out of the way. It fits frame sizes from 3 inches to 5 inches and has a 1,500 lb…

The Fulton Bolt-Thru Swivel Marine Jack #FXP10 fits 3 x 5-inch trailer frames and comes with a bracket that we know matches the Ranger Trail swivel jacks like you have. I have attached a photo that shows the mounting bracket and the measurements…

Trailer makers don't maintain detailed specs on items like the jacks they supply on their new trailers but we do offer many types and capacities so we'll have one that will work for you. It is best to select a jack with more capacity than you…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…