Anti-Rattle Device Recommendation for a 1-1/4 inch Hitch

Question

Question:

I have a 2010 Prius V with a Draw Tite 24847 hitch, will the He6033 correctly screw into the Draw tite and fit securely. I have tried other anti rattle locking hitch pins and the threads on the lock were too small and did not securely fit the hitch? Thank you,

asked by: Kelly S

0

Expert Reply:

The # HE6033 is an anti-rattle device/locking hitch pin when used on a Bike Rack like part # HE2110. It can be used with a ball mount or other hitch accessory, but it won't function as an anti-rattle device as it would just slide through the ball mount.

The accessory would have to be threaded and match the threads of the bolt for it to work as an anti-rattle device. You would need a product like the # RM-061-125 as well for an anti-rattle device if that is what you are looking for.

expert reply by: Jameson C

0

Answer 1

I reached out to my contact at Malone and the Anti-Rattle Hitch Lock For Malone Cargo Carries or Bike Racks #MPG2174 is a 1/2" - 13 bolt. If you are wanting to use this bolt in a rack that isn't made by Malone, you will need to confirm its…

view full answer...

Answer 2

You can use the Advantage Threaded Trailer Hitch Receiver Lock, #HE6033, on the cargo carrier, #63155, but the shank in the cargo carrier is not threaded so the lock will not function as an anti-rattle device, just a lock. If you are just looking for…

view full answer...

Answer 3

I have attached a video that shows how the Heininger Holdings Advantage Threaded Trailer Hitch Receiver Lock item #HE6033 functions. Your hitch may have gotten some dirt in it. I recommend spraying it down with WD-40 and making sure you get it down…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 7

You are on the right track. The only way we have that will allow you to use the Thule T2 Pro Xtr Bike Platform Rack part #TH69TX with the 2.5" receiver tube opening on your truck would be with adapter. For this, I recommend the Brophy Hitch…

view full answer...

Answer 8

Honestly Ladd, not much. All of the hitches: the Curt #C13387, Draw-Tite #76226, and etrailer are basically the same size, weight (30 lbs), and have the same weight capacities. The only thing separating these hitches is going to be the actual brand…

view full answer...

Anti-Rattle Device Recommendation for a 1-1/4 inch Hitch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching