Mounting Bracket Dimensions for the Scissor Steps part # AS24  

You are right on. The 8" rise/drop on the MORryde StepAbove Fold-Down Steps #MR98RR is the height between the steps. The #MR48RR you were looking at has a 9" rise/drop meaning the distance between the steps is 9". The #MR98RR is…

The TorkLift Glow Steps part #TLA7804 would work great for you as they will have a distance of 34-1/2 inches from the mounting bracket to the ground when installed and come with pins that are easily removed from the top of the steps when you need to…

When fully extended, the Brophy Aluminum Scissor Steps, #AS24, will have a depth of approximately 3 ft and an overall height of 39 inches (see photo). The mounting bracket that is included with the steps is pretty universal, so it could be mounted to…

The Brophy Camper Scissor Steps for truck campers, #AS04, are intended for an entry height of 31" to 40". If your camper door sets within that 31-40' range then yes this will fit your rig. Please see attached image for measuring points…

The TorkLift GlowStep Stow N' Go #TLA7844 weighs just over 30 (about 32) lbs by itself. The TorkLift GlowStep part #TLA7804 and part #TLA7504 both weigh a little over 20 (about 22) lbs each.

There is some adjustability for the steps. For example, the 3-step TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear #TLA7833 you're looking at is designed for an entry height of 23-1/2" - 34-1/2" but for a 4-Step Version,…

I called my contact at Brophy about the RV Scissor Steps, part #AS24. They told me if you have between 31 and 39 inches of distance from the mounting bracket to the ground, the steps will work well for you. I have attached a photo of the steps with…

For your truck camper that has a distance of 36 inches from the bottom of the door to the ground you would want the part #AS24 which has a range of 31 - 39 inches. This dimension range on the steps would be from the top of the mounting bracket down…

You are correct the Single Add-On Step for TorkLift GlowStep Kits #TLA7801 is the correct part to add a step to the TorkLift GlowStep #TLA7844 that you also mentioned.

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Air bags like the Air Lift LoadLifter 5000 #AL88289 should be filled to a minimum of 5 PSI at all times. Filling them beyond that is done after the truck is loaded. The steps will go as follows: 1. Inflate air bags to at least 5 PSI 2. Load…