What Direction Should Disc Brake Calipers Face
Question:
Im planning on changing my drum brakes to disk brake on my 5th wheel does it make any difference where you install your calipers facing the front or facing the back of the 5th wheel
asked by: Ralph
Expert Reply:
Brake calipers are typically installed so they point toward the back of the trailer, but it is okay to install them pointing up or toward the front of the trailer. The important thing to consider when installing the calipers is to make sure at least one bleeder valve is pointing up and above the brake line fitting. The reason for this is to let air escape if it gets trapped in the caliper when you are bleeding the brakes.
I have attached an installation video on a trailer that was upgraded from drum brakes to disc brakes for you to check out.
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Continue Researching
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Video: The Low-Down on the Kodiak Disc Brake Kit
- Video: DeeMaxx Disc Brake Kit Review
- Shop: DeeMaxx Disc Brake Kit w/ Actuator for Triple Axle Trailers - 9/16" Studs - 8 on 6-1/2 - 7K
- Shop: DeeMaxx Hydraulic Brake Line Kit - Tandem Axle - 20'
- Shop: Kodiak Hydraulic Brake Line Kit - Single Axle - 18'
- Shop: Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K
- Shop: Kodiak Hydraulic Brake Line Kit - Tandem Axle - 20'
- Shop: DeeMaxx Trailer Idler Hub for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Search Results: dx89fr
- Q&A: Are The Mounting Brackets On The DeeMaxx Disc Brake Kit # DE72FR Also Stainless Steel?
- Search Results: 58846
- Video: Detailed Breakdown of the DeeMaxx Trailer Idler Hub for 3,500-lb Axles
- Search Results: junction box trailer wiring
- Article: How to Bleed Your Trailer Surge Brakes
- Search Results: brake line
- Search Results: trailer leaf springs
- Video: Neighbor Interaction with the DeeMaxx Disc Brake Kit
- Search Results: 9030
- Search Results: 56034
- Video: In-Depth Review of the CE Smith Spare Tire Mount for Trailers
- Video: Checking Out the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
- Video: The Low-Down on the Mounting Bolts and Hardware for 10" Brake Assemblies
- Q&A: How to Select Replacement 10-Inch Hub/Drums for 1997 EZ Loader Boat Trailer
- Q&A: Replacement Caliper and Bracket for the Kodiak Disc Brake Kit item # K2R35D
- Q&A: How to Determine Correct Torque Setting for New Disc Brake Setup on Boat Trailer
- Q&A: Torque Spec for Tightening Trailer Brake Assemblies to Trailer Spindle
- Shop: Tire Chains
- Q&A: What Grade Bolts Come With BRKH10AS And What Are They Made Of?
- Q&A: Will 14" Diameter Trailer Wheels fit On The DeeMaxx Disc Brake Kit # DE66YR?