Trailer Hitch and Trailer Wiring Connector for a 2008 Ford Escape Hybrid
Question:
I need a trailer hitch and wire harness for a 2008 Ford Escape Hybrid. Please note that the truck has backup alerts. Your web site recommends using a modulite but does not indicate a product number. Please recommend a hitch and the required wiring harness\modulite required.
asked by: David
0
Expert Reply:
I would recommend the Curt Class III Receiver Hitch, part # 13650. It has a 2 inch receiver opening and a 3,500 lb towing capacity. You can view the install details and see an install video by clicking the provided links.
Since your Escape has the back up sensors, you would need to use part # 118551 for the trailer wiring.
expert reply by: Sarah
0
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 675 lbs TW
- 4500 lbs GTW
- 5250 lbs WD GTW
- 2 Inch Hitch
- 675 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Similar Expert Q&A Pages
- Trailer Hitch Fit for 2020 Ford Escape
- Recommended Hitch Fit for 2009 Ford Escape Hybrid
- Does Draw Tite Hitch 75751 Fit 2008 Ford Escape Hybrid Fit Full Size Spare
- Replacement Hardware for Reese Hitch 44680 for a 2012 Ford Escape
- Does the Draw-Tite Hitch # 75751 fit under the Spare of a 2009 Ford Escape
- Maximum Gross Trailer Weight and Tongue Weight Rating of the Draw-Tite Trailer Hitch Part # 75751
- Recommended Trailer Hitch For 2012 Ford Escape
- Recommended Towing Components for 2007 Ford Escape XLT
- Can 1-1/4 Inch Factory Hitch on 2010 Ford Escape Be Removed to Install 2 Inch Hitch
- Recommended Trailer Hitch Receiver For 2005 Ford Escape
- Will Rear Vallance Need to be Trimmed to Install a Trailer Hitch on a 2009 Ford Escape 4x4
- What is Towing Capacity of 2012 Ford Escape with Draw Tite Hitch 75751 Installed
- Recommended Trailer Hitch And Motorcycle Carrier For 2008 Ford Escape With V6 Engine
- Maximum Towing Capacity of a 2008 Ford Escape Hybrid with 2.3L Engine
- Installation Instructions for the Draw-Tite Trailer Hitch # 75751 on a 2006 Ford Escape
- Trailer Hitch, Ball Mount, and Trailer Wiring Recommendations for a 2010 Ford Escape XLT
- Does the Draw-Tite # 75751 Trailer Hitch Just Bolt Right up When Being Installed on 2008 Ford Escape
- What Tools are Needed to Install Draw-Tite Trailer Hitch 75751 on a 2006 Ford Escape
- Tow Capacity of A 2005 Ford Escape XLT 3.0L V6
- Trailer Hitch Recommendation for a 2009 Ford Escape Hybrid
- What Does Draw Tite Hitch part # 75751 Weigh
- Trailer Hitch that Fits 2010 Mercury Mariner
- How to Confirm Towing Capacity of 2008 Ford Escape
- Where is the Draw-Tite Hitch 75751 for a 2011 Ford Escape Made
- Can 2012 Ford Escape Tow 1,000 lb Trailer
- Recommended Equipment to Tow a Trailer with Brakes with a 2006 Mazda Tribute V6
- Availability of 2 Inch Hitch to Fit 2009 Ford Escape with Factory Class II Tow Package and Hitch
- How to Order Replacement Installation Hardware for a Trailer Hitch
- Does Trailer Hitch for 2005 Mazda Tribute Allow Spare to Be Left Installed