bing tracking image
Q & A Icon

Recommended Parts To Convert Drum To Disc Brakes On EZLoader Trailer With 3,500 Lb Axle


I am looking for drum to disk conversion kit. 1997 ezloader 14 foot wheel and 5 lug nuts


Helpful Expert Reply:

To convert your EZLoader trailer to disc brakes you will need a couple things.

I called my contact at EZLoader and with the VIN you supplied they told me you have a 3,500 lb axle on your trailer and they told me what size bearings your trailer uses. To convert your trailer to disc brakes I recommend the Kodiak Disc Brake Kit, part # K2HR35D. This is designed for wheels 13 inches and larger with a 5 on 4-1/2 bolt pattern, and with a 4-bolt brake mounting flange.

The inner bearing has an inner diameter of 1.378 inches and the inner diameter of the outer bearing measures 1.063 inches. If any of these dimensions do not match the components you have on your trailer, you can check out the attached helpful article that explains what is needed and how you can measure the spindle on your trailer to make sure you get the right parts.

This disc kit includes 2 full brake assemblies needed to convert your brakes. The only added part you need is part # BH-3MFS-1. These are flexible lines that allow the calipers on the disc brakes to move freely when used.

helpful expert reply by:
Jeffrey L

Products Referenced in This Question

Product Page this Question was Asked From

Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>