Grease Seal Recommendation for a Trailer Hub that has Inner Bearing L68149
Question:
My inner bearing # is L68149, can you tell what seal I need? Thanks
asked by: Mike
0
Expert Reply:
Most likely the grease seal a hub would have that has an inner bearing number of L68149 would be the 10-19 part # RG06-050.
You should measure your current seal to be sure though. It should have an inner diameter of 1.719 and an outer diameter of 2.565.
expert reply by:
Jameson C
0
Products Referenced in This Question
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Can A Bent Axle Cause Uneven Wear On Inside Of Tires?
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Replacement Spindle/Hub Components For A Dexter 4K D40 Trailer Axle
- Article: Trailer Wiring Diagrams
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Q&A: What is the Best Grease for Trailer Bearings
- Q&A: Converting Hubs From Grease To Oil Bath On 2014 Outback 298RE Travel Trailer
- Q&A: Replacement Bearings, Grease Seals, And Brake Assemblies For Lippert Trailer Axle V000163950
- Q&A: USA Made Bearing Kit For An AL-KO 4,400 lb Axle
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)