Availability of Lock for Curt Trailer Hitch Anti-Rattle Kit # F-315

Question

Question:

Do you sell a lock for this part

asked by: Alberto

0

Expert Reply:

An add-on lock is not available for the Curt Trailer Hitch Anti-Rattle Kit # F-315 but we do offer locking hitch pin devices for 1-1/4" accessories such as #e98879 that work with any hollow-shank ball mount or accessory. However, the # e98879 is not an anti-rattle device, only a hitch lock.

expert reply by: Adam R

0

Answer 1

The bolt that comes with the #Y8890185 is the same as the #Y8890176. The bolt is a 1/2"-13 bolt that is 4.28" long with 2.5" of threads.

view full answer...

Answer 2

We have a hitch that will fit your 2023 Infiniti Q50 Sport and allow you to use your bike rack with a 1-1/4" shank. - Draw-Tite Sportframe Trailer Hitch Receiver #24931

view full answer...

Answer 3

I have a different option for you, but while you could use a hitch reducer like the #HTAD to allow the Yakima HoldUp Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount #Y02443 to work in the 1-1/4" trailer hitch receiver of your 2016 Kia…

view full answer...

Answer 4

Yes, I checked with Yakima and the Replacement Hitch Hardware for Yakima HoldUp Bike Racks part #8890260 will work with the Yakima FourTimer 4 Bike Platform Rack part #Y02469. The Yakima and the Replacement Hitch Hardware for Yakima HoldUp Bike Racks…

view full answer...

Answer 5

If you have a 2-inch Yakima Holdup bike carrier like part #Y02443, we have a replacement tongue, part #8880581, that can be used to make the bike carrier a 1-1/4 inch carrier. I spoke with my contact at Yakima and they said an adapter cannot be used…

view full answer...

Answer 6

For a compatible lock that will work with your Yakima HoldUp 2 Bike Rack #Y02445, you will want the Yakima HitchLock #Y07235 along with the Hitch Bolt and Clip #Y8890200 (if you do not already have this). This lock will work great on your existing…

view full answer...

Answer 7

The hitch bolt included in the Yakima Replacement Mounting Hardware for SwingDaddy Hitch Mounted Carrier #Y8890185 measures exactly 4.28 inches long with a 1/2 inch diameter and 13 pitch. If you only need the bolt and clip you can use part…

view full answer...

Answer 8

For your old King Pin 2 bike rack with 1-1/4 inch shank, the Replacement Hitch Bolt and Clip for Yakima HoldUp and BigHorn Bike Carriers #Y8890200 is the correct replacement. If you want to have the lock, I recommend adding the Yakima HitchLock for…

view full answer...

Answer 9

To convert your Yakima HoldUp 2 Bike Rack for 2" Hitches #Y02443 so that it will fit a 1-1/4" hitch receiver you need the Replacement Tongue #8880581 along with the Hardware Kit #Y90195. Please note that when using this smaller tongue you…

view full answer...

Answer 10

The replacement mounting hardware for the 1-1/4 inch versions of the Yakima HoldUp (2008 to present) is actually #Y8880129. Replacement hardware #8890260 is for HoldUp models that fit 2 inch receivers only.

view full answer...

Answer 11

In order to use an anti-rattle device like #F-315 the shank of the accessory has to be hallow. Most 1-1/4 inch shanks are solid. Also, the 1-1/4 inch Yakima HoldUp uses a threaded pin, #Y8880129, which acts as an anti-rattle device. There is a…

view full answer...

Answer 12

For your Yakima Hold Up, the Replacement Spine #8890277 will require the Replacement Hitch Hardware for Yakima HoldUp Bike Racks #8890260. The 1-1/4 inch hardware will not be the correct fit for the larger shank.

view full answer...

Availability of Lock for Curt Trailer Hitch Anti-Rattle Kit # F-315

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching