Installation Instructions and Details for the Curt Trailer Hitch # 11184 for the 2010 BMW 135i Hitch
Question:
I have a few questions regarding this hitch. 1. Where does the underbody panel reside and what is the level of trimming required? 2.Does the package include all the nuts and bolts required to do the installation? 3. Any idea as to how many people have actually installed this hitch on their 135is?
asked by: Kartik J
Expert Reply:
On the CURT Class I 1-1/4 Inch Hitch, part # 11184, for the 2010 BMW 135is the under body panels are at the rear of the vehicle underneath behind the rear fascia. Detailed trimming information is provided in the installation instructions (see link).
All of the hardware required to install the hitch on your BMW 135i coupe or convertible is included.
I have no idea how many of these hitches have been installed on the BMW 135i, but in the last several months we have sold more than 10 of them and I have not heard of any complaints about installation or performance of the hitch.
Some items you may need to complete your Class I towing setup are listed below.
Hitch Ball 1-7/8 inch, item # 19256
Hitch Ball 2 inch, item # 19258
Wiring, item # C59496
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- 8 Feet Long
- Universal Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Does the Curt Trailer Hitch # C11184 Fit a 2012 BMW 128i Convertible
- Q&A: How to Install the Curt Trailer Hitch Receiver on a 2013 BMW 128i
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Recommended Trailer Hitch Receiver for a 2014 BMW X1 28i
- Q&A: Will Draw-Tite Trailer Hitch Receiver Fit 2015 X1 M Sport
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Trailer Wiring Harness Recommendation for 2017 Honda Accord Sedan
- Q&A: 4 Pole Circuit Tester Power Source
- Q&A: How Long is the Curt Class II Ball Mount D-55003/45503
- Article: Trailer Hitch Installation Tips
- Article: Trailer Hitch Receiver Sizes