Hub Assembly Recommendation for Ranger Trail Boat Trailer
Question:
i need 2 hub assemblies for a ranger trail trailer. here are the specs i am looking for. i did not see one in your inventory. Inner bearing L68149 ID 1.378 Race OD 20362 Outer bearing L44649- ID1.063 Race OD 1.980 This is a 5 lug on 4 1/2 inch with a 6 1/2 inch plate. Can you please help me.
asked by: William B
0
Expert Reply:
I have attached a link to all of our trailer hubs that use # L68149 and # L44649 bearings and have a 5 on 4-1/2 bolt pattern.
I recommend the Dexter Trailer Hub Assembly # 8-247-50UC3-EZ. This hub features a grease cap that is compatible with EZ lube spindles that have a grease fitting out the end of the spindle. The galvanized hub is ideal for marine use, and will be durable enough for both freshwater and marine environments. This assembly comes with bearings, races, and a grease seal.
For this hub and drum assembly with the traditional grease cap, you can use part # 8-247-50UC3.
expert reply by: Victoria B
0
Products Referenced in This Question
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 3,500-lb E-Z Lube Axles - 10" - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- Replacement For 11033L Idler Hub and Spindle Ranger Boat Trailer
- Standard Grease Cap to Replace EZ Lube Cap on 3,500 Trailer Hubs
- AL-KO 7230 Hub and Brakes Replacement Parts
- Nut Size Used on Dexter 3500 lb Hub and Drum Assembly
- Replacement Hub/Drums and Brake Assemblies for Hubs Marked 8-247
- Bearing Kit Recommendation for a Dexter 8-247 Hub on an 84 Spindle on a 2007 Keystone Passport
- Hub Replacement for a 2000 Eagle Pro Fisherman
- New Hubs Do not Fit Over Brake Shoes On Trailer
- How to Identify Correct Replacement Trailer Hub Based on Bearings
- Replacement Dexter 8-247 Wheel Hub
- Replacement Trailer Hub for Hub Marked 8-247
- How To Measure For Replacement Bearings to Replace Timken Bearings
- Replacement Spindle Washer For 3,500 Lb EZ Lube Spindle
- Self Adjusting Brake Assemblies that Fit Dexter Hub/Drum part # 8-247
- Replacing Hubs and Bearings for 1984 Ranger Trail Trailer
- Wheel Bearings, Seals and Grease Caps for Dexter 10 Inch Trailer Hub/Drum with 8-247 Casting Number
- Recommended Replacement Hub/Brake Drum for Boat Trailer Axle
- Solution for 2007 Keystone Springdale 249 5th Wheel Needing Replacement Spindle
- Replacement Axle for Older Trailer That Uses Hubs with Obsolete Bearings
- Replacement Hub and Drum Recommendation for Dexter 8-247
- Grease Seals for a Dexter 10x2-1/4 Inch EZ Lube Hub
- Picking Out Hub/Drums and Bearings for 1988 Ranger 363V Trailer
- 2004 Ranger Trailer Hub Recommendation
- Replacement Trailer Axle Bearings For Dexter 8-247 Hubs On 2001 Skyline Aljo
- Replacement Hub/Drums and Brake Assemblies for 3500 lb Axle
- What Kind of Grease Cap Comes with the Trailer Hub Assembly # 8-247-50UC3-EZ
- Trailer Hub and Drum Replacement for Dexter 8-247 Plus Brake Assemblies
- Replacement Grease Cap Rubber Plug and Tips on Driving In Dust Caps/Bearing Protectors
- Replacement Brake Assemblies for 2005 Keystone Hornet with 3500 lb AL KO Axles