Ball Mount with a 6 Inch Rise and 1 Inch Diameter Ball Hole
Question:
I am in need of a fixed 6inch rise with 1inch ball hole ball mount for my class V 2inch receiver....Do you have anything that will work? Im not finding in on the website. I forgot to mention that hitch is Curt and installed on 2013 Nissan Frontier Crew. So standard length would be fine and I prefer a 90 degree mount. I have a 7 inch rise now with a 2 3/4 inch high 2inch ball. My problem is the tail gate hits the ball if I it down. I need at least another 1 to 1 1/2 inch more clearance thus the shorter rise. A new ball with a short neck might help?
asked by: Bill
Expert Reply:
We have some options for ball mounts that have a 6 inch rise. Curt ball mount # C45090 has a 6 inch rise and when in the rise position it is rated for 3,500 pounds gross trailer weight and 350 pounds tongue weight. The rise is measured from the top of the receiver opening to the top of the ball platform.
We also have # C45100 with 6-1/4 inch rise. Capacity is the same as the above ball mount.
For 5 inches of rise we have # C24WR rated for 8,000 pounds gross trailer weight. I have linked videos for you.
Products Referenced in This Question
Curt Ball Mount for 2" Hitches - 5" Rise, 6" Drop - 8,000 lbs - Aluminum
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Aluminum Shank - Silver
- Drop - 6 Inch
- Rise - 5 Inch
- Fits 2 Inch Hitch
- 8000 lbs GTW
- Class IV
- CURT
more information >
Curt Ball Mount for 2" Hitches - 6-1/4" Rise, 7-1/2" Drop - 13" Long - 5,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 7 Inch
- Rise - 6 Inch
- Fits 2 Inch Hitch
- 5000 lbs GTW
- Class III
- Long Shank
- CURT
more information >
Product Page this Question was Asked From
Curt Ball Mount - 6" Rise, 8" Drop - 11-1/2" Long - 5,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 8 Inch
- Rise - 6 Inch
- Fits 2 Inch Hitch
- 5000 lbs GTW
- Class III
- CURT
more information >
Continue Researching
- Shop: 2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Stainless - 7.5K
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Replacement Converter for Magnetek 7300 in Airstream
- Article: Trailer Tire Sizing
- Q&A: How Much Drop Does the Reese 3357 Weight Distribution Shank Provide
- Q&A: How to Pick Out Ball Mount for Honda Odyssey for Additional Rise
- Q&A: Trailer Jack that Doesnt Hang Down Very Far for a Big Tex Utility Trailer
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Choose the Right Trailer Hitch Class
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: Best Weight Distribution System for Towing a 28 ATC Aluminum Trailer with a 2017 Ford F-350
- Q&A: Weight of the 24x60 Reese Cargo Carrier # 63153
- Q&A: Recommended Fixed Ball Mount For 6 Inch Rise
- Article: Trailer Maintenance Schedule
- Article: How to Measure the Bolt Pattern of a Trailer Wheel