What is the Difference Between the Tekonsha Prodigy P2 and the P3 Brake Controllers

Question

Question:

Im looking at either the P3 or the Prodigy P2. The major differences I see are 3 axis accelerometer in the P2 vs 1 axis in the P3. Looks like that would essentially eliminate alignment issues. The other difference seems to be the display capability and fault detection. Am I missing something here?

asked by: John G

0

Expert Reply:

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller # 90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display that allows the user to switch between the two systems. I have included a link to the installation details for the P3.

The P2, # 90885, will also work with both electric brakes and electric over hydraulic brake systems but the mode is selected differently since it doesn't have the same kind of display as the P3. The P2 is more of an entry level brake controller; easy to use, easy to mount, and it works well. That is probably why it is one of our most popular and highest rated brake controllers. I have also included a link to the installation details for the P2 below.

expert reply by: Michael H

0

Dwayne H.

5/2/2020

Will the p3 install on a 2014 ram big Horn? Or should I go with the p2. It looked to me there might be an issue with the wiring harness for the p3 and the 2014 ram

Reply

Chris R.

5/5/2020

The same wiring harness is used for both the Tekonsha P2 and P3 Brake Controllers, and either option will fit and work well on your 2014 Ram. I like the P3 a little better because of its great display. Regardless of which model you go with, the Tekonsha # 3023-P will allow for an easy plug-and-play install.

Reply

Bobby

6/20/2020

Which Tekonsha wil be better for a 2020 Toyota Tacoma trd 4x4 ? P2 or P3?

Reply

Chris R.

6/23/2020

I definitely recommend going with the Tekonsha Prodigy P3 # 90195. I think it has a better display (easier to read messages, settings, etc) and I really like the option to store different settings. For your Tacoma you just need to add the Plug-In Harness # 3031-P to allow for a simple plug-and-play installation.

Reply

John G.

7/21/2020

I have a 2018 Mercedes GLS--would the Tekonsha P2 or P3 be better and which harness is required? Thanks much.

Reply

Chris R.

7/27/2020

I would definitely go with the Tekonsha Prodigy P3 # 90195. It's just a nicer controller with a larger display for easy-to-read settings, etc. For your Mercedes GLS you just need the Plug-In Harness # 3066-P.

Reply

Kyle J.

8/8/2020

Hello, what wiring harness adapter is needed for a 2017 silverado? P2 or p3 for first time trailer hauler?

Reply

Jon G.

8/19/2020

To connect a P2 # 90885 or P3 # 90195 to your 2017 Chevy Silverado you just need the Adapter # 3016.

Reply

Anthony S.

8/12/2020

what harness is required if I was using the p3 on a 2008 gmc sierra?

Reply

Jon G.

8/19/2020

If your 2008 GMC Sierra has the factory 7-Way then there is a wiring harness up under your dash that you will splice the pigtail from the P3 # 90195 to. If you don't have the factory 7-Way then you're going yo need to also install either part # PK11898 or part # 30955.

Reply

Answer 1

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 2

Although the Tekonsha Prodigy P3 #90195 and Primus IQ #TK90160 electric brake controllers are very similar they do have some key differences as well. For one the P3 is designed to work with electric and electric over hydraulic brake systems. The…

view full answer...

Answer 3

If you have never used a brake controller before, the P2 #90885 will be easier to learn on and use than the P3, #90195 initially. The P3 has several features the P2 doesn't including the ability to change the LED screen color, change the…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

view full answer...

Answer 6

The Prodigy P2 brake controller #90885 and the Primus IQ #TK90160 share some basic features, but there are many differences. The most obvious ones are the displays and appearances of the units, which are connected to the usability of the brake…

view full answer...

Answer 7

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 8

As far as function goes, the two controllers are actually pretty similar. The primary difference between the two is that the P3 uses what I would call a more user friendly display. Instead of an error code like what's displayed on the P2, the…

view full answer...

Answer 9

I do have a solution for your 2024 Kia Telluride that has the LED taillights that does allow it to have both a 4-way and 7-way plus install a brake controller but it is not with the #TK74CR which does not work for you based on the LED taillights.…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 11

Hi Mark; appreciate the purchase and there is but I can also go ahead and show you where the brake controller port is on your 2014 Toyota Tundra to connect the Redarc Plug-and-Play Wiring Harness #RED49FR. Hopefully showing this photo will be…

view full answer...

Answer 12

There's a pretty noticeable difference between the Brakeman controller you have installed currently and a P2 #90885 or P3 #90195. The P3/P2 controllers are proportional which means that they have an inertia sensor that can detect how hard you…

view full answer...

What is the Difference Between the Tekonsha Prodigy P2 and the P3 Brake Controllers

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching