Replacement Grease Seal for the Timbren Axle Less System part # A12WS545
Question:
I have finished building my tandem boat trailer for the sand with everything but the steel from you guys. While putting grease in the axles with a hand grease gun I blew out an oil seal. I pumped until I could see existing grease ooze through the bearing. Can you tell me what the number of the seal is. It is the Timbren Axel-less 1200 pound 5 on 4!/2. Thanks,
asked by: Dean A
0
Expert Reply:
The correct grease seal you would need for your Timbren Axle Less System part # A12WS545 that you have is the # 10-9.
expert reply by:
Jameson C
0
Products Referenced in This Question
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.500 Inch I.D.
- 1.987 Inch O.D
- TruRyde
more information >
Similar Expert Q&A Pages
- Timbren Axle-Less Suspension for 10,000 Pound Mobile Hydraulic Lift
- Wheel Recommendation for Timbren Axle-Less Trailer Suspension System # A12WS545
- Can I Use Timbren Axle-Less Trailer Suspension System with Hubs on my Boat Trailer
- Can Timbren Axle-Less Trailer Suspension Rubber Springs Be Replaced to Increase Weight Rating
- Dimensions of Timbren Axle-Less Trailer Suspension # A12WS545 For Utility and Motorcycle Trailer
- How Much Clearance Is Needed For Tires When Installing Timbren Axle-Less System Under Trailer
- Available Weight Capacities for Timbren Axle-Less Trailer Suspension Kits
- Comparing The Timbren Axle-Less Trailer Suspension System To The FlexiRide Half Torsion Axle System
- Is The Timbren Axle-Less Suspension System Equipped For Use On Highway
- Timbren Axle-Less Suspension System for a Tear Drop Trailer Build
- Replacement Hub Assembly for Timbren Axle-Less System # A12WS545
- Timbren Axle-Less System Recommendation for a Tear Style Trailer Towing 500 lbs Max
- Can Built-In Camber be Adjusted on Timbren Axle-Less Trailer Suspension System with Hubs
- How Much Does the Axleless Timbren Suspension System A12WS545 Compress When Loaded
- Is There a Timbren Axle Less Kit Setup that Fits Jeep Wheel Bolt Pattern 5 on 5 inch
- Recommended Axle for a Trailer and Cargo Weighing 800 lbs
- Timbren Axle Less System for 2k Axle Replacement with 5 on 4-1/2 inch Hubs and Off Road Config
- Timbren Axle-Less Trailer Suspension for Utility Trailer
- Timbren Axle Less Kit with Hubs Recommendation for Small Trailer Towed by Chevy Tracker
- Recommended Axle-Less System and Wheel/Tire Combo for a Light Boat Trailer
- Installing Timbren Axle-Less Suspension System on Older Trailer
- Timbren Axle-Less Trailer Suspension and Hubs with 5 on 5 Bolt Pattern
- Will a Kenda 215/60-8 Bias Trailer Tire and Wheel Fit the Timbren Axle-Less System part # A12WS545
- Wall Thickness Recommendation for Square Tubing Support For Timbren Axle-Less Suspension
- Can Metric Studs Be Substituted In Timbren Axle-Less Trailer Suspension System With Hubs
- Would Taskmaster 4.80-12 Tire White Mod Wheel Fit on a Timbren Axle-Less Trailer Suspension System
- Compatibility of Timbren Axle-Less Suspension on Boat Trailer
- Does 1,200 lb Timbren Axle Less System Require Frame Cross Beam