bing tracking image
Q & A Icon

How to Pick Out Replacement Hubs for a Trailer

Question:

I am trying to replace the wheel bearing assembly on a 1995 Coleman Fleetwood Stoney Creek pop up camper and it being 20 years old and to my knowledge it has never been repacked with grease. I feel it is best to just replace the assembly all together. I have searched the web for part numbers and have zero luck so Im hoping yall can steer me in the right direction. Even better have the parts i need. Thanks in advance,

0

Expert Reply:

In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out.

Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial or digital caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride.

If you get back to me with that information I will help you pick out the right hub assemblies. Or, you can follow the link I attached that will take you to the page that has all of our replacement hubs.

You would want to first select the bolt pattern that you have, next select the inner bearing you have, followed by selecting your outer bearing, and then all the correct hubs will be listed.

click to enlarge
expert reply by:
0
Jameson C

Product Page this Question was Asked From


Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>