2 inch Hitch Ball Recommendation for B and W Adjustable Height Pintle Hitch Ball Combo  

Yes, it can! To add a 2" hitch ball to the Curt Pintle Hook with 2-5/16" Ball item #C45910-15-20 you'll need the Replacement Hitch Ball for Curt Pintle Hook Combo item #C48820. This is the only way to add a 2" hitch ball you…

Yes you sure can! The replacement pins that are used to adjust the hitch ball and pintle hook on the Curt #C45910-15-20 are found on our site listed as part #C45925. If you would rather go with a locking pic set I recommend the Curt Lock Set #C23556.…

Everything you need to use the Curt Pintle Hook, part #C45910-15-20, is included except for a hitch pin. For a standard pin and cilp use part #C21500. If you prefer to lock the pintle hook to your hitch receiver use the Curt Lock Set, part #C23556,…

In order to obtain the Curt Adjustable 2-Ball Channel Mount part #C45926 with a pintle ball combo you can go with the Curt Pintle Hook with 2-5/16" Ball part #C45910-15-20 or just obtain the Curt Adjustable 2-Ball Channel Mount and purchase the…

The closest option to the Curt Pintle Hook #C45910-15-20 we have available that uses a 2 inch ball is the B&W Tow & Stow Pintle Hook #BWTS10055. This is very similar to the Curt model you were looking in at, as it features an adjustable shank…

I have a couple options you can use to secure the Curt Pintle Hook with 2-5/16" Ball #C45908 to your receiver. First is the Curt Lock Set #C23556 which includes one hitch/receiver lock pin and the 2nd keyed alike lock for replacing one of the…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

Hi James, To my knowledge the Reese Goosebox is the only replacement option that won't void the frame warranty. That being said, the frame warranty is typically only a year so you really aren't losing much voiding it, especially if you've…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.