Reese Weight Distribution Shank Recommendation for 7 inches of Drop
Question:
Towing: Hitch Shanks I purchased a reese 66072 a few years ago to pull my 2010 Coleman Niagara camper with my 2010 GMC Acadia. I need to change tow vehicle to a 2015 Chev Surburban. The Surburban is considerably higher than my Acadia and I need a shank that lets me lower the head an additional 5inch to 6inch than my present shank reese 54970. Thank you for your help.
asked by: Greg M
0
Expert Reply:
Products Referenced in This Question
Reese Weight Dist Shank - 12-1/4" Long - 2" Drop to 6-1/2" Rise - 1,500 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1500 lbs TW
- 15000 lbs GTW
- Fits 2 Inch Hitch
- Trunnion - 1-1/4 In Drop
- Round - 2 In Drop
- Trunnion - 6-1/2 In Rise
- Round - 5-1/4 In Rise
- Reese
more information >
Strait-Line Weight Distribution w/ Sway Control - No Shank - Trunnion Bar - 6K GTW, 600 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Prevents Sway
- Shank Not Included
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- Allows Backing Up
- 300 lbs
- 400 lbs
- 500 lbs
- Reese
more information >
Video/Article/FAQ this Question was Asked From
Article or VideoFeatured Help Information
Instructions
Miscellaneous Media
Similar Expert Q&A Pages
- Drop Shank for Reese Mini Weight Distribution Hitch
- How to Choose the Correct Weight Distribution Shank Rise or Drop
- How to Determine the Correct Drop for a Weight Distribution Shank
- Weight Distribution Shank Doesn't Have Enough Drop To Tow Trailer Level
- Difference Between Reese RP3344 and Curt C17124 Weight Distribution Shanks
- What is the Longest Weight Distribution Shank Available
- Weight Distribution Shank with Longer Than 12 Shank
- Choosing Weight Distribution Shank with the Correct Rise or Drop
- Weight Distribution Shank For Truck With 6-Inch Lift Using Equal-I-zer Weight Distribution
- Weight Distribution Shank With the Most Drop for Trunnion Bar System
- Can a Reese Weight Distribution Shank be Used with a Curt Weight Distribution Head
- Weight Distribution System Drop Recommendation for Lifted Trucks
- Recommended Drop Weight Distribution Shank for Use with a EAZ Elite Weight Distribution System
- Longer Weight Distribution Shank, Timbren Springs and Straptek Sway Control for 2014 Ram 2500
- Drop Shank Recommendation for Weight Distribution System Used with Lifted Jeep Rubicon
- Is Sway Control Needed with a Weight Distribution System
- Is Shank Compatible with Reese Strait-Line Weight Distribution System
- How To Choose New Weight Distribution System Shank for Lifted Truck
- Drop Dimensions of 11 Inch Weight Distribution Shank # RP3215
- Can Reese Weight Distribution Adjustable Shank Be Used With Fastway Weight Distribution System
- Can 2 Inch Weight Distribution Shank be Used in 2-1/2 Inch Trailer Hitch Receiver on 2016 Ram 2500
- What is the Diameter of the Bolt Holes on Reese Weight Dist Shank # RP3344
- Reese Weight Distribution Shank Recommendation for a System That Needs 6-1/2 inches of Drop
- Reese Weight Distribution Shank # RP3344 Recommendation for a 2001 Dodge 2500 Quad Cab
- Correct Weight Distribution Shank to Provide 1-1/2 Inches of Drop
- Is Reese Weight Distribution Shank # RP3344 Compatible with SteadiFlex WD System
- Recommended Weight Distribution Shank for Truck and Trailer 9" Apart
- Recommended Weight Distribution Shank for Horse Trailer With Total Weight of 6,900 lbs
- Will Reese Weight Dist Shank Bolt Hole Spacing Match Up with Older Head Unit