Timbren Axle-Less Trailer Suspension and Hubs with 5 on 5 Bolt Pattern
Question:
I am interested in part number A12WS545, however I would like to replace the 4 x 4.5 hubs to 5 x 5 hubs. is this possible? If so, could you please reply with part numbers for me to make my order.
asked by: Rene
0
Expert Reply:
In order to use idler hubs that have a 5 on 5 bolt pattern you would have to use Timbren Axle-Less system # ASR3500S05. Then you could add 2 of hub # 84550UC1-EZ. But the Timbren system is rated for 3,500 pounds which will be stiffer than the 2,000 pound model # A12WS545. If you can go with a 3,500 system then this is the best option.
None of the hubs with 5 on 5 bolt pattern will fit the 2,000 pound Timbren systems.
expert reply by: Michael H
0
Products Referenced in This Question
Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Redline
more information >
Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 4 Bolt Flange - 3,500 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Video/Article/FAQ this Question was Asked From
Article or VideoFeatured Help Information
Instructions
Miscellaneous Media
Similar Expert Q&A Pages
- Timbren Axle-Less Suspension for 10,000 Pound Mobile Hydraulic Lift
- Wheel Recommendation for Timbren Axle-Less Trailer Suspension System # A12WS545
- Can I Use Timbren Axle-Less Trailer Suspension System with Hubs on my Boat Trailer
- Can Timbren Axle-Less Trailer Suspension Rubber Springs Be Replaced to Increase Weight Rating
- Dimensions of Timbren Axle-Less Trailer Suspension # A12WS545 For Utility and Motorcycle Trailer
- How Much Clearance Is Needed For Tires When Installing Timbren Axle-Less System Under Trailer
- Replacement Grease Seal for the Timbren Axle Less System part # A12WS545
- Available Weight Capacities for Timbren Axle-Less Trailer Suspension Kits
- Is The Timbren Axle-Less Suspension System Equipped For Use On Highway
- Comparing The Timbren Axle-Less Trailer Suspension System To The FlexiRide Half Torsion Axle System
- Timbren Axle-Less Suspension System for a Tear Drop Trailer Build
- Timbren Axle-Less System Recommendation for a Tear Style Trailer Towing 500 lbs Max
- Can Built-In Camber be Adjusted on Timbren Axle-Less Trailer Suspension System with Hubs
- Can Metric Studs Be Substituted In Timbren Axle-Less Trailer Suspension System With Hubs
- How Much Does the Axleless Timbren Suspension System A12WS545 Compress When Loaded
- Is There a Timbren Axle Less Kit Setup that Fits Jeep Wheel Bolt Pattern 5 on 5 inch
- Timbren Axle Less Kit with Hubs Recommendation for Small Trailer Towed by Chevy Tracker
- Replacement Hub Assembly for Timbren Axle-Less System # A12WS545
- Recommended Axle for a Trailer and Cargo Weighing 800 lbs
- Timbren Axle Less System for 2k Axle Replacement with 5 on 4-1/2 inch Hubs and Off Road Config
- Recommended Axle-Less System and Wheel/Tire Combo for a Light Boat Trailer
- Would Wheel with Backspacing 3-3/4 inches Clear Frame Installed with Timbren Axle Less Kit A12WS545
- Would Taskmaster 4.80-12 Tire White Mod Wheel Fit on a Timbren Axle-Less Trailer Suspension System
- Will a Kenda 215/60-8 Bias Trailer Tire and Wheel Fit the Timbren Axle-Less System part # A12WS545
- Wall Thickness Recommendation for Square Tubing Support For Timbren Axle-Less Suspension
- Timbren Axle-Less Trailer Suspension for Utility Trailer
- Does 1,200 lb Timbren Axle Less System Require Frame Cross Beam
- Compatibility of Timbren Axle-Less Suspension on Boat Trailer