Will the Reese Sway-Control Bracket # RP26003 Work with 2-5/16 inch Hitch Balls  

The Reese Sway Control Kit part #83660 can be bolted to the frame of your enclosed trailer. And if you use the ball mount bracket part #RP26003 you wouldn't have to have a tab welded to your ball mount either.

The Reese Sway Control Bracket, #RP26003, will work with 2-5/16 inch hitch balls as long as the shank of the hitch ball is no larger than 1 inch in diameter. The ball hole of the Reese bracket has a 1 inch diameter. If your current hitch ball has a…

Yes, the Firestone Coil-Rite Air Helper Springs #F4175 will work great with your 2022 Volkswagen Atlas.

A standalone friction sway bar like the Curt #17200 that you referenced is an excellent sway control alternative for vehicles like your 2018 Audi Q5 that aren't rated for a weight distribution system. You are correct that a full weight…

You can use the Reese Sway-Control Bracket #RP26003 on a ball mount in the rise position provided that when in the rise position the bracket is not free to swivel. It is not likely that you would run into this problem but you need to just be aware of…

It wouldn't ever be necessary to put a rise into the ball of a sway control setup. So what that means Barry is that since the ball always mounts to the side of the ball mount platform it basically will always be at the correct height. I attached…

Yes, you can use the Reese Sway Control Bracket #RP26003 on the MaxxTow Adjustable Ball Mount MT70067. For a sway control unit I would go with a Reese Friction Sway Control Kit #83660 as it is designed to work on the Reese Bracket #RP26003.

All of our friction sway control unit

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…