Would Taskmaster 4.80-12 Tire White Mod Wheel Fit on a Timbren Axle-Less Trailer Suspension System
Question:
Part #A12WS545 has a picture of measurements of a frontal view, picture #A12RS440_kk.jpg. In which the measurement from the hub face to the mounting flange is 4 7/8. I should be able to use a wheel #TA36RR, Yes?? I am building a small camper trailer to pull behind my motorcycle. Thanks.
asked by: Jeff
0
Expert Reply:
I attached the picture you referenced and actually the part # A12WS545 that you referenced has a 6-7/8 inch distance from the hub face to the frame of the trailer.
The rim and tire part # TTA36RR that you referenced would easily fit as it is a 4 inch wide rim with a zero offset that has a tire on it that goes beyond the lip of the rim.
click to enlarge
expert reply by: Jameson C
0
Products Referenced in This Question
Taskmaster 4.80-12 Bias Trailer Tire with 12" White Mod Wheel - 5 on 4-1/2 - Load Range C
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range C
- 4.80-12
- 12 Inch
- M - 81 mph
- 5 on 4-1/2 Inch
- Steel Wheels - Powder Coat
- Taskmaster
more information >
Video/Article/FAQ this Question was Asked From
Article or VideoFeatured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- Timbren Axle-Less Suspension for 10,000 Pound Mobile Hydraulic Lift
- Wheel Recommendation for Timbren Axle-Less Trailer Suspension System # A12WS545
- Can I Use Timbren Axle-Less Trailer Suspension System with Hubs on my Boat Trailer
- Can Timbren Axle-Less Trailer Suspension Rubber Springs Be Replaced to Increase Weight Rating
- Dimensions of Timbren Axle-Less Trailer Suspension # A12WS545 For Utility and Motorcycle Trailer
- How Much Clearance Is Needed For Tires When Installing Timbren Axle-Less System Under Trailer
- Replacement Grease Seal for the Timbren Axle Less System part # A12WS545
- Available Weight Capacities for Timbren Axle-Less Trailer Suspension Kits
- Is The Timbren Axle-Less Suspension System Equipped For Use On Highway
- Comparing The Timbren Axle-Less Trailer Suspension System To The FlexiRide Half Torsion Axle System
- Timbren Axle-Less Suspension System for a Tear Drop Trailer Build
- Timbren Axle-Less System Recommendation for a Tear Style Trailer Towing 500 lbs Max
- Can Built-In Camber be Adjusted on Timbren Axle-Less Trailer Suspension System with Hubs
- Can Metric Studs Be Substituted In Timbren Axle-Less Trailer Suspension System With Hubs
- How Much Does the Axleless Timbren Suspension System A12WS545 Compress When Loaded
- Is There a Timbren Axle Less Kit Setup that Fits Jeep Wheel Bolt Pattern 5 on 5 inch
- Timbren Axle Less Kit with Hubs Recommendation for Small Trailer Towed by Chevy Tracker
- Replacement Hub Assembly for Timbren Axle-Less System # A12WS545
- Recommended Axle for a Trailer and Cargo Weighing 800 lbs
- Timbren Axle Less System for 2k Axle Replacement with 5 on 4-1/2 inch Hubs and Off Road Config
- Recommended Axle-Less System and Wheel/Tire Combo for a Light Boat Trailer
- Would Wheel with Backspacing 3-3/4 inches Clear Frame Installed with Timbren Axle Less Kit A12WS545
- Timbren Axle-Less Trailer Suspension and Hubs with 5 on 5 Bolt Pattern
- Will a Kenda 215/60-8 Bias Trailer Tire and Wheel Fit the Timbren Axle-Less System part # A12WS545
- Wall Thickness Recommendation for Square Tubing Support For Timbren Axle-Less Suspension
- Timbren Axle-Less Trailer Suspension for Utility Trailer
- Does 1,200 lb Timbren Axle Less System Require Frame Cross Beam
- Compatibility of Timbren Axle-Less Suspension on Boat Trailer