Will a Regular Vent with No Fan Fit in Place of a Ventline Northern Breeze Roof Vent  

Yes we have replacements for the Northern Breeze RV roof vent VB0568 that you have now. For a standard roof vent with a manual lift and no fan we have the #V2092SP-28 and you'd be set.

I have included a diagram that shows the location of some screws that attach the screen frame and the upper housing (fan shroud) to the flange. That may allow you to access the area you are needing to look at. The Ventline Northern Breeze is a…

Yes, the Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents #BBC0530-01 will work with your Ventline V2501 Northern Breeze fan. I have attached a product video for you to check out as well.

Unfortunately we do not carry the motor for the Northern Breeze model so I recommend replacing it with the Ventline Ventadome Trailer Roof Vent w/ 12V Fan #V2094SP-34. This roof vent uses a 12-volt fan to circulate air in motor homes and enclosed…

Any circuit boards included in a fan would definitely be brand and/or model specific so I checked with Ventline for a replacement for the board in your Northern Breeze V2501 fan. Unfortunately, Ventline no longer has stock of those circuit boards.…

For your Ventline model v2525 you can use the Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents #BBC0530-01 (for white) or #BV0554-03 (for smoke).

I do have an option for you but the Ventline Northern Breeze Roof Vents have been discontinued so replacement parts are hard to come by. We do not have the handle extension sleeve that goes between the knob and operator. The best option we can offer…

I may have a solution for you, but we don't have a specific replacement crank available for the Ventline V2401 Northern Breeze. With that said, you may be able to use the Metal Vent Crank- 1" #37220305 which replaces a worn or broken vent…

The ladders that are found on the backs of RVs and travel trailers are fairly universal, and not necessarily specific to your coach. These ladders can be trimmed to size but come in 3 basic ladder heights: 84-1/2-, 97- and 99-1/2-inches tall. You can…

The correct replacement control module for your Kwikee Steps with Control Module 909513 is the Lippert Components Kwikee Control Unit part #LC379606.

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…